AUTOABC Wireless Carplay and Android Auto Module

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your AUTOABC Wireless Carplay and Android Auto module. This module enhances your driving experience by integrating smartphone functionalities directly into your vehicle's display system.

The 2025 AUTOABC Carplay module offers automatic car system identification, eliminating the need for manual code dialing. It is compatible with both aftermarket and original car cameras, providing a more convenient and compatible solution.

2. Compatibility

This module is specifically designed for Peugeot and Citroen vehicles equipped with SMEG and MRN systems. It is NOT compatible with NAC systems.

Compatible Car Models:

• Peugeot: 207, 208, 307, 308, 508, 2008, 3008, 5008RCZ
• Citroen: C3, C4, C5, DS4, DS5

How to Confirm Your Car System Version:

It is crucial to verify your car's system version before installation to ensure compatibility. Follow these steps:

1. Select the fourth key on the left of the Vehicle.
2. Select the knob in the top right corner.
3. Select 'Options'.
4. Select 'System Settings'.
5. Select 'System Information'.
6. Select 'View' to see the system details.
7. Select either 'Software' or 'Map' on this screen to view the version date.

3. Product Overview and Accessories

The AUTOABC module is a compact unit designed for seamless integration. The package includes all necessary cables and accessories for installation.

Product Accessories List:

• Host Unit: The main processing unit for Carplay/Android Auto. Dimensions: 140*105*25mm.
• LVDS Cable: For video signal transmission.
• Wi-Fi Antenna: For wireless connectivity.
• Power Cable: For power supply to the module.
• RCA/USB Cable: For audio/video input and USB flash play.

4. Setup and Installation

Important Note: This device will only work after the vehicle is started (ignition on).

4.1. Car Dashboard Removal

For detailed guidance on removing your car's dashboard, please scan the QR codes below with your smartphone to access instructional videos specific to your car model.

4.2. Cable Connections

Follow the connection chart accurately. Refer to the numbered points in the diagram below for detailed instructions.

1. Connect the Original Car Power.
2. Connect the plug of the Original Car Power Cable.
3. Connect the Original Car Host Video Port.
4. Connect the Original Car Video Cable.
5. USB port.
6. Rearview camera inspection cable.
7. Rear view camera input.
8. Front view camera input.
9. Rear view camera 12V power supply cable.
10. Microphones.
11. WiFi Antenna.
12. AUX.

4.3. LVDS Cable Connection

The LVDS cable connects to the back of the original radio. Ensure correct connection; incorrect wiring can result in a black screen.

1. Connect the Original Radio Power.
2. Connect the plug of the Original Car Power Cable.
3. Connect the Original radio Video Port.
4. Connect the Original Car Video Cable.

5. Operating Instructions

5.1. Functional Overview

The module supports a range of features to enhance your in-car experience:

• CarPlay / Android Auto: Wireless and wired connection for seamless smartphone integration, including navigation, music, and voice control (Siri/Google Assistant).
• Mirroring: Supports wired and wireless screen mirroring for both iPhone (AirPlay) and Android phones (AutoLink).
• USB Video Playback: Play video and audio media directly from a USB disk.
• Reversing Video Input: Decodes video for rear-view cameras, supporting both original and aftermarket cameras with parking sensors and front view cameras.

5.2. Wireless CarPlay Connection

1. Step 1: Turn on "CarPlay" in the module's smartphone settings.
2. Step 2: Check the Bluetooth device name (e.g., "CAR-xxxx").
3. Step 3: On your iPhone, turn on Wi-Fi and keep it on. Then, go back to Bluetooth settings to connect CarPlay.
4. Step 4: Select the Bluetooth device name (e.g., "CAR-XXX") and confirm the pairing request. Choose "Use CarPlay" when prompted.

5.3. Wireless Android Auto Connection

1. Step 1: Turn on "Android Auto" in the module's smartphone settings.
2. Step 2: Check the Bluetooth name starting with "CAR-xxx" in your phone's Bluetooth interface.
3. Step 3: Click on the Bluetooth name on your phone. A pairing request will appear; click "Pairing". Follow the Android Auto connection process on your screen.
4. Step 4: After successful Bluetooth pairing, turn on the Android Auto app on your mobile phone, and the system will connect automatically.

5.4. Wireless AutoLink Connection (Screen Mirroring for Android)

1. Step 1: Scan the provided QR code (or use your mobile browser) to download and install the AutoLink app.
2. Step 2: Turn on "AutoLink" in the module's smartphone settings.
3. Step 3: Open the AutoLink app on your phone, search for "CAR-WIFI-XXXX" and connect. Click "START NOW" on the phone prompt box.
4. Step 4: The media sound for AutoLink requires a Bluetooth connection.

5.5. Steering Wheel Control

The CarPlay interface decoder box supports the following original steering wheel controls:

• Voice control button
• Telephone button
• Next song / Previous song buttons
• Volume + / - buttons

Other buttons are not supported.

• The rollers rotate left and right for confirming selections.
• Press and hold for 2 seconds to switch systems.
• Short press to activate Siri.

5.6. Voice Control

Once your smartphone is connected to CarPlay/Android Auto, Siri/Google Assistant can be activated by simply saying "Hey Siri/Google" or using the steering wheel voice control button.

5.7. Reverse Camera Functionality

The module supports both front and rear view cameras, displaying parking lines and dynamic guidelines on the screen when engaged.

6. Audio Settings

6.1. Call Echo Cancellation

If you experience echo during phone calls, follow these steps:

1. Go to Module Settings > Audio > AEC Delay.
2. Keep the car quiet.
3. Set the volume to a moderate position.
4. Click the "Start Auto AEC" button. The system will generate a beep. Wait 20 seconds for the estimation to complete.

6.2. Bluetooth Audio Connection

If your original car has Bluetooth music functionality, you can use it for audio output.

1. Step 1: In the module's setting interface, open Bluetooth to return to the original car interface.
2. Step 2: Select "New Pairing" for Bluetooth audio setting.
3. Step 3: Wait a few seconds and confirm the PIN code sent from your mobile device.
4. Step 4: Tap on the music to show sound, indicating a successful connection.

6.3. AUX Audio Connections

If your original car does not have Bluetooth music, you must use AUX audio.

1. Step 1: In the module interface, turn off "Use original Bluetooth".
2. Step 2: In the original car interface, navigate to Multimedia > AUX front.

Important Notes:

• Bluetooth audio and AUX audio cannot be used simultaneously.
• AirPlay/AutoLink does not support Bluetooth audio.

6.4. Activating AUX for OEM Cars (if AUX cannot be activated)

If your OEM car cannot activate the AUX input, follow these steps:

1. Step 1: In the OEM car settings, navigate to the audio source selection and ensure AUX is selected or enabled.
2. Step 2: Access the media settings and look for options related to AUX or external input.
3. Step 3: Confirm the settings to enable AUX.
4. Step 4: Adjust AUX amplification if necessary.
5. Step 5: Use the AUX plug provided in the kit to physically connect to the OEM car's AUX port.

7. Maintenance

7.1. System Firmware Upgrade

Note: It is not recommended to upgrade the firmware if the device is functioning normally. Only perform an upgrade if you encounter problems that can be resolved by an update.

If an upgrade is necessary, contact customer service for the correct firmware file.

Upgrade Method:

1. Unzip the firmware file to the root directory of a USB flash drive.
2. Insert the USB flash disk into the USB port of the product.
3. Go to Module Settings > System > Firmware Upgrade; select manual upgrade.

7.2. Factory Reset

To perform a factory reset:

1. Go to Module Settings > System > Factory Reset.
2. Confirm the prompt to erase all data and reboot.

8. Troubleshooting

• Wireless Connection Disconnections: If CarPlay/Android Auto frequently disconnects, try changing the Wi-Fi signal channel. Go to the module's menu screen, then Wi-Fi settings, and change the channel to 48 or 161. This often resolves issues caused by frequency interference.
• Black Screen after LVDS Connection: Ensure the LVDS cable is connected correctly to the back of the original radio. Incorrect connection can cause a black screen.
• Reverse Camera Not Working: If the camera is not displaying properly, try changing the CVBS signal mode in the module's settings (Module Settings > Reverse Settings > Change CVBS signal mode).
• No Audio via AUX: Ensure that "Use original Bluetooth" is turned OFF in the module settings when using AUX audio. Remember that Bluetooth audio and AUX audio cannot be used simultaneously.
• Android Auto Disconnection after Firmware Update (Samsung Phones): For Android phones like Samsung experiencing disconnection issues after a firmware update, adjust your phone's settings:
  • 1. Samsung WiFi Settings Connections: Disable "Intelligent Wi-Fi" and "Connectivity labs" features. Enable "Wi-Fi developer options" and "Wi-Fi packet log for debugging". Turn on "Air-key Capture".
  • 2. Dual-SIM Configuration Settings: For dual SIM mobile phones, use SIM1 first. Calls will default to SIM1, and data transmission will default to SIM1.
  • 3. Clear Google Services Cache: Go to Apps > App info > Storage > Clear Cache and Clear All Data for Google Play Services.

9. Specifications

10. User Tips

• Always confirm your car's system (SMEG/MRN vs. NAC) before purchasing or installing to avoid compatibility issues.
• If you experience frequent disconnections with wireless CarPlay/Android Auto, try adjusting the Wi-Fi channel in the module settings to 48 or 161.
• For optimal audio quality, ensure proper AUX or Bluetooth setup and avoid using both simultaneously.
• When installing, double-check all cable connections, especially the LVDS cable, to prevent display problems.

11. Warranty and Support

For any issues or technical support, please contact AUTOABC Official Store customer service. You can also refer to the official item guides and documents available in PDF format for additional information. A PDF user manual is available at this link.