AVHRIT AT450

Contents

AVHRIT AT450 1/2" Cordless Brushless Impact Wrench

Model: AT450 | Brand: AVHRIT

1. Introduction

The AVHRIT AT450 1/2" Cordless Brushless Impact Wrench is a high-performance power tool designed for heavy-duty fastening and loosening tasks. Featuring a powerful brushless motor and a robust 1000Nm (738Ft-lbs) of torque, it is ideal for automotive repair, construction, and various industrial applications. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting.

2. Safety Information

WARNING: Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.

  • Eye Protection: Always wear appropriate eye protection (safety glasses or goggles) when operating the impact wrench.
  • Work Area: Keep your work area clean and well-lit. Cluttered or dark areas invite accidents.
  • Secure Workpiece: Always secure the workpiece before operating the tool.
  • Avoid Accidental Starting: Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the tool.
  • Use Correct Accessories: Only use impact-rated sockets and accessories designed for impact wrenches.
  • Keep Hands Clear: Keep hands and body parts away from the rotating drive and socket.
  • Explosive Atmospheres: Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
  • Battery & Charger: Use only AVHRIT specified battery packs and chargers. Using other battery packs may create a risk of injury and fire.

3. Package Contents

Your AVHRIT AT450 Impact Wrench kit includes:

  • 1x 1/2" Brushless Impact Wrench (Green/Black)
  • 2x 5.0Ah Lithium Batteries
  • 1x 90-Min Fast Charger (110V US Plug)
  • 4x Impact Sockets: 17mm, 19mm, 21mm, 24mm
  • 1x 5" Extension Bar
  • 1x Custom Molded Case
AVHRIT AT450 Impact Wrench Kit
Figure 3.1: Complete AVHRIT AT450 Impact Wrench Kit with accessories.

4. Specifications

ParameterDetail
ModelAT450
Torque Range100-1000Nm (74-738Ft-lbs)
No-Load Speed0-2400 RPM (3-speed trigger)
Battery Voltage21V
Battery Capacity2x 5.0Ah Lithium-Ion
Charging Time1.5 Hours (0→100%)
Tool Weight (with battery)7.3 lbs (3.3 kg)
Drive Size1/2" Square Drive
Head SizeCompact 8.7"
Operating Temperature-4°F to 122°F (-20°C to 50°C)
IP RatingIP54 (Dust and water resistant)
ComplianceUL/CE/FCC Certified

5. Setup

5.1. Battery Charging

  1. Insert the 21V Lithium-Ion battery into the 90-Min Fast Charger. Ensure it clicks securely into place.
  2. Plug the charger into a standard 110V US power outlet.
  3. The charger's indicator light will show the charging status. Allow approximately 1.5 hours for a full charge from empty.
  4. Once fully charged, remove the battery from the charger.
Two 5.0Ah Lithium-Ion Batteries
Figure 5.1: Two 5.0Ah Lithium-Ion Batteries for extended runtime.
5.0Ah Lithium-Ion Battery Features
Figure 5.2: Illustration of 5.0Ah Lithium-Ion battery features including 2-hour quick charge, over voltage, and over temperature protection.

5.2. Attaching Sockets

  1. Ensure the impact wrench is turned off and the battery is removed for safety.
  2. Select the appropriate impact socket (17mm, 19mm, 21mm, or 24mm) or the 5" extension bar.
  3. Align the square drive of the socket with the 1/2" square drive anvil on the impact wrench.
  4. Push the socket firmly onto the anvil until it locks into place. Pull gently to ensure it is secure.
Multiple Size Sockets
Figure 5.3: Included impact sockets (17mm, 19mm, 21mm, 24mm) for various applications.

6. Operating Instructions

6.1. Powering On/Off

The tool is activated by pressing the trigger. Release the trigger to turn the tool off.

6.2. Forward/Reverse Rotation

A button located near the trigger controls the direction of rotation:

  • Forward Rotation: Push the button to the left for tightening screws and nuts.
  • Reverse Rotation: Push the button to the right for loosening screws and nuts.
Forward & Reverse Button Diagram
Figure 6.1: Diagram illustrating the Forward and Reverse rotation button.

6.3. Speed Control

The AT450 features a 3-speed trigger, allowing you to match the torque and speed to your task:

  • Low Speed: Ideal for delicate tasks, furniture assembly, or when precise control is needed.
  • High Speed: For heavy-duty applications such as removing stubborn lug nuts or large construction fasteners.

The variable speed trigger allows for further fine-tuning within each speed setting.

6.4. LED Worklight

A built-in LED light automatically illuminates when the trigger is pressed, providing visibility in dark or confined work areas such as engine bays, undercarriages, or dimly lit workshops.

Built-in LED Light in use
Figure 6.2: The built-in LED light illuminates the work area for easier operation at night.

6.5. Brake-Stop Technology

This feature automatically reduces torque when nuts begin to loosen, helping to prevent over-loosening, stripping, and potential injuries from flying debris.

Impact Wrench Max Torque
Figure 6.3: The impact wrench delivering maximum torque for automotive tasks.
Impact Wrench for Truck Tire Repair
Figure 6.4: The AVHRIT AT450 in action for truck tire repair.
Impact Wrench for Scaffolding
Figure 6.5: The AVHRIT AT450 being used for scaffolding assembly.
Impact Wrench for Equipment Maintenance
Figure 6.6: The AVHRIT AT450 facilitating equipment maintenance.

7. Maintenance

7.1. Cleaning

  • Always disconnect the battery before cleaning.
  • Wipe the tool with a clean, damp cloth. Do not use harsh chemicals, solvents, or abrasive cleaners, as these can damage plastic parts.
  • Keep the ventilation openings clear of dust and debris to ensure proper cooling.
Air Vent for Heat Dissipation
Figure 7.1: Air vents designed for efficient heat dissipation, crucial for tool longevity.

7.2. Battery Care

  • Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
  • For long-term storage, charge batteries to approximately 50% capacity.
  • Avoid fully discharging batteries frequently, as this can reduce their lifespan.

7.3. Brushless Motor

The AT450 features a brushless motor, which requires no carbon brush replacement, reducing maintenance needs and increasing motor lifespan by 70% compared to brushed motors.

Brushless Motor Diagram
Figure 7.2: Internal view of the brushless motor, highlighting its efficiency and reduced noise.
Brushless Motor Benefits
Figure 7.3: Benefits of the brushless motor: 70% longer life, 90% more power, 100% fewer sparks and smoke.

8. Troubleshooting

ProblemPossible CauseSolution
Tool does not startBattery not charged or improperly seatedCharge the battery fully. Ensure the battery is securely inserted into the tool.
Low power or reduced torqueBattery charge is low; incorrect speed settingRecharge the battery. Select a higher speed setting for demanding tasks.
Socket not attaching securelyIncorrect drive size; debris in anvilEnsure you are using a 1/2" square drive socket. Clean any debris from the anvil.
Tool overheatingProlonged heavy use; blocked ventilationAllow the tool to cool down. Clear any obstructions from the air vents.

9. User Tips

  • For optimal performance on very stubborn bolts, ensure the battery is fully charged before starting your task.
  • Utilize the 3-speed trigger to match the torque to your specific task, preventing overtightening or damage to smaller fasteners.
  • The built-in LED light is particularly useful in dimly lit areas like engine bays or undercarriages, enhancing visibility and safety.
  • When working in extreme temperatures (e.g., Midwest winters or Texas summers), the aircraft-grade aluminum housing and IP54 rating ensure durability and reliable operation.

10. Warranty & Support

For warranty information, technical support, or service inquiries, please refer to the manufacturer's official website or contact AVHRIT customer service directly. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.