1. Introduction
The ACEZUK M01 Car Jump Starter is a versatile and powerful device designed to provide emergency jump-starting for vehicles, act as a portable power bank, and offer illumination through its integrated LED flashlight. With a robust 3000A peak current and a 12800mAh battery capacity, it is engineered to start most 12V cars, including gasoline engines up to 8.0L and diesel engines up to 7.0L. This manual provides essential information for the safe and effective use of your ACEZUK M01.
2. Package Contents
Please check the package for the following items:
- ACEZUK M01 Car Jump Starter Unit
- Smart Jump Cables (with red and black clamps)
- USB-C Charging Cable
- User Manual
- Storage Pouch
3. Specifications
| Feature | Specification |
|---|---|
| Brand Name | ACEZUK |
| Peak Current | >1200 A (3000A) |
| Battery Capacity | 12800mAh (12000-18000mAh range) |
| Engine Compatibility (Gas) | Up to 8.0L |
| Engine Compatibility (Diesel) | Up to 7.0L |
| Output Voltage | 12V |
| Fast Charge | Two-Way Fast Charge |
| Item Weight | 400g |
| Conversion Rate | 80%~85% |
| Number Of Built-in Batteries | 4 |
| External Testing Certification | CE |
| Type-C Input | 5V/2A, 9V/2A |
| USB Output | 5V/2.4A |
| Hign-concerned Chemical | None |
4. Safety Information and Protections
The ACEZUK M01 is equipped with 8 smart clamp protections to ensure safe operation and prevent misuse. The car battery indicator will warn you of improper connections with a buzz sound and flashing lights.
Smart Clamp Protections:
- Over Temperature Protection: Prevents overheating of the device.
- Over Charge Protection: Protects against overcharging the internal battery.
- Over Discharge Protection: Prevents excessive discharge of the internal battery.
- Over Current Protection: Safeguards against excessive current flow.
- Over Voltage Protection: Protects against voltage surges.
- Short Circuit Protection: Prevents damage from short circuits.
- Reverse Polarity Protection: Alerts and protects against incorrect connection to battery terminals.
- Anti-interference Protection: Minimizes electrical interference during operation.
5. Setup
Charging the Jump Starter:
Before first use, fully charge the ACEZUK M01. Connect the provided USB-C charging cable to the Type-C input port on the jump starter and a suitable USB power adapter (not included). The 2.1-inch LCD display screen will show the charging status and battery level. Ensure the device is adequately charged for optimal performance.
6. Operating Instructions
Jump Starting Your Vehicle:
Follow these steps to safely jump start your car:
- Insert the Junction Cable: Firmly insert the smart jump cable's EC5 connector into the EC5 output port on the jump starter.
- Connect the Terminals: Attach the red (+) clamp to the positive terminal of your car battery and the black (-) clamp to the negative terminal. The smart cable will indicate a correct connection.
- Start the Car Engine: Once connected correctly, start your car engine.
- Remove the Clamps: Immediately remove the clamps from the car battery after the engine starts.
Note: Please immediately remove the clamps after starting the car. Do not use the product to charge the car battery directly; it is for jump-starting only.
Using as a Power Bank:
The M01 can charge various electronic devices with its 12800mAh capacity. Connect your device's charging cable to the USB output port (5V/2.4A) on the jump starter. The LCD screen will display the output indication.
Using the LED Flashlight:
The integrated LED flashlight offers three modes:
- Lumination: For general lighting.
- Fast Flash: For signaling or attracting attention.
- Slow Flash (SOS): For emergency signaling.
Press the LED Button/Power Button to cycle through the modes. This feature is useful for camping, emergencies, and road trips.
Product Demonstration Video:
7. Maintenance
Charging:
To maintain optimal battery health, it is recommended to fully charge the jump starter every 3-6 months, even when not in use. This prevents deep discharge and prolongs the lifespan of the internal battery.
Storage:
Store the ACEZUK M01 in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the device is clean and free from dust and moisture. Keep the smart clamps clean and free of corrosion.
8. Troubleshooting
Vehicle Not Starting:
- Check Battery Level: Ensure the jump starter has at least 25% charge. Startup success rate is higher with sufficient power.
- Check Connections: Verify that the smart clamps are securely attached to the correct battery terminals (red to positive, black to negative). The smart cable will indicate if the connection is incorrect.
- Vehicle Battery Condition: If the vehicle battery is severely damaged or completely dead, multiple attempts or a longer connection time (within safety limits) might be needed, or the battery may need replacement.
Smart Cable Warning:
If the smart cable emits a buzz sound or flashes lights, it indicates an incorrect connection or a safety issue. Disconnect immediately and re-evaluate the connection points on the car battery.
9. User Tips
- For optimal jump-starting performance, ensure the ACEZUK M01 is charged above 25%.
- Always read the user manual thoroughly before operating the device to prevent incorrect usage.
- Keep the jump starter charged and readily accessible in your vehicle for unexpected emergencies.
- The jump starter is designed for temporary power boost to start an engine, not as a permanent battery charger for your vehicle.
10. Warranty and Support
For any product-related issues, technical support, or warranty claims, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific contact information and warranty terms.
