ABKO MR650

Contents

ABKO MR650 Virtual 7.1 Channel 3-Mode Gaming Headset

User Manual

1. Introduction

Thank you for choosing the ABKO MR650 Virtual 7.1 Channel 3-Mode Gaming Headset. This headset is designed to provide an immersive audio experience with versatile connectivity options for various gaming platforms and devices. Please read this manual carefully to ensure proper use and optimal performance of your new headset.

ABKO MR650 Gaming Headset in black with RGB lighting and detachable microphone
ABKO MR650 Gaming Headset (Black)

2. Product Overview

2.1 Package Contents

  • ABKO MR650 Gaming Headset
  • Detachable Microphone
  • 2.4GHz Wireless USB Dongle
  • USB-C Charging Cable
  • 3.5mm Audio Cable
  • User Manual

2.2 Headset Components and Controls

Familiarize yourself with the headset's layout and controls:

Detailed diagram of ABKO MR650 headset features and controls, including 7.1 surround sound, 3 modes, RGB lighting, detachable mic, 50mm drivers, volume wheel, mic mute, mode switch, RGB button, power button, USB-C port, 3.5mm jack, and mic port.
ABKO MR650 Headset Features and Controls Diagram
  • Power Button: Press and hold to power on/off.
  • Mode Switch Button: Cycles between 2.4GHz Wireless, Bluetooth, and Wired (3.5mm) modes.
  • Volume Wheel: Adjusts audio volume.
  • Microphone Mute Button: Toggles microphone mute on/off.
  • RGB Lighting Button: Controls RGB lighting effects.
  • USB-C Port: For charging the headset.
  • 3.5mm Audio Jack: For wired connection.
  • Microphone Port: For attaching the detachable microphone.

3. Setup

3.1 Charging the Headset

  1. Connect the USB-C charging cable to the headset's USB-C port.
  2. Connect the other end of the cable to a USB power source (e.g., computer USB port, USB wall adapter).
  3. The LED indicator will show charging status. A full charge takes approximately 2.5 hours.
  4. The headset offers up to 40 hours of battery life without RGB lighting and 20 hours with RGB lighting enabled.

3.2 Attaching the Microphone

Insert the detachable microphone into the microphone port on the left earcup until it clicks into place. Ensure it is firmly connected for optimal voice pickup.

3.3 Connecting to Devices

3.3.1 2.4GHz Wireless Mode (PC, PS, Switch)

  1. Plug the 2.4GHz wireless USB dongle into an available USB port on your PC, PlayStation console, or Nintendo Switch dock.
  2. Power on the headset by pressing and holding the Power Button.
  3. Press the Mode Switch Button until the headset is in 2.4GHz wireless mode (indicated by a specific LED color/pattern).
  4. The headset should automatically pair with the dongle. If not, refer to the troubleshooting section.
  5. On your device, ensure the ABKO MR650 is selected as the audio output and input device.

3.3.2 Bluetooth Mode (Mobile, PC, Switch)

  1. Power on the headset.
  2. Press the Mode Switch Button until the headset is in Bluetooth pairing mode (indicated by a flashing LED).
  3. On your mobile device, PC, or Nintendo Switch, go to Bluetooth settings and search for available devices.
  4. Select "ABKO MR650" from the list to pair.
  5. Once paired, the LED indicator will show a solid color.

3.3.3 Wired Mode (3.5mm Jack)

  1. Connect one end of the 3.5mm audio cable to the headset's 3.5mm audio jack.
  2. Connect the other end to the 3.5mm audio port on your device (PC, console controller, mobile phone, etc.).
  3. The headset will automatically switch to wired mode. No power is required for basic audio functionality in this mode, but RGB lighting and virtual 7.1 may require power.

4. Operating Instructions

4.1 Power On/Off

Press and hold the Power Button for approximately 3 seconds to turn the headset on or off.

4.2 Switching Modes

Short press the Mode Switch Button to cycle through 2.4GHz Wireless, Bluetooth, and Wired (3.5mm) modes. An audible prompt or LED indicator will confirm the current mode.

4.3 Volume Control

Rotate the Volume Wheel up or down to increase or decrease the audio volume.

4.4 Microphone Usage

Press the Microphone Mute Button to mute or unmute the microphone. An LED indicator on the microphone or headset may show its status (e.g., red light for muted).

4.5 RGB Lighting Control

Short press the RGB Lighting Button to cycle through different RGB lighting effects or to turn the lighting off.

4.6 Virtual 7.1 Surround Sound

The Virtual 7.1 Channel Surround Sound is typically activated automatically in 2.4GHz wireless mode on compatible platforms (PC). For PC, ensure any necessary drivers or software are installed and configured according to your operating system's audio settings.

5. Maintenance

5.1 Cleaning

  • Wipe the headset with a soft, dry cloth.
  • Do not use harsh chemicals, cleaning solvents, or strong detergents.
  • Avoid getting moisture into any openings.

5.2 Storage

  • Store the headset in a cool, dry place away from direct sunlight and extreme temperatures.
  • When not in use for extended periods, ensure the headset is fully charged before storing.

5.3 Battery Care

  • To prolong battery life, avoid fully discharging the headset frequently.
  • Charge the headset regularly, even if not in constant use.

6. Troubleshooting

  • No Sound:
    • Ensure the headset is powered on and charged.
    • Check the volume wheel on the headset and your device's volume settings.
    • Verify the correct mode is selected (2.4GHz, Bluetooth, or Wired).
    • For 2.4GHz, ensure the USB dongle is properly connected and recognized by your device.
    • For Bluetooth, ensure the headset is paired and connected in your device's Bluetooth settings.
    • For wired, ensure the 3.5mm cable is fully inserted into both the headset and the device.
  • Microphone Not Working:
    • Ensure the microphone is securely attached to the headset.
    • Check if the microphone is muted using the Mic Mute Button.
    • Verify that the ABKO MR650 is selected as the input device in your system's sound settings.
    • Test the microphone on another device if possible.
  • Connection Issues:
    • 2.4GHz: Try unplugging and re-plugging the USB dongle. Restart the headset.
    • Bluetooth: Unpair and re-pair the headset with your device. Ensure no other Bluetooth devices are interfering.
    • Move closer to the connected device to avoid range issues.
  • RGB Lighting Not Working:
    • Ensure the headset is powered on.
    • Press the RGB Lighting Button to cycle through effects or turn it on.
    • Check battery level, as RGB lighting consumes power.

7. Specifications

FeatureSpecification
ModelMR650
Connectivity Modes2.4GHz Wireless, Bluetooth, 3.5mm Wired
Driver Size50mm Neodymium
Frequency Response20Hz - 20kHz
Impedance32Ω
Sensitivity110dB ± 3dB
Microphone TypeDetachable, Omni-directional
Microphone Sensitivity-42dB ± 3dB
Battery Capacity1000mAh
Charging TimeApprox. 2.5 hours
Battery Life (No RGB)Up to 40 hours
Battery Life (With RGB)Up to 20 hours
Wireless RangeUp to 10 meters
MaterialPVC
WeightApprox. 300g

8. User Tips

  • For the best gaming experience, especially on PC, utilize the 2.4GHz wireless mode for low latency and virtual 7.1 surround sound.
  • When using Bluetooth, ensure your device is within the 10-meter range for stable connection.
  • If you experience audio distortion or dropouts, try moving away from other wireless devices that might cause interference.
  • Regularly check for firmware updates from ABKO's official website to ensure optimal performance and compatibility.
  • To conserve battery life, remember to turn off the RGB lighting when not needed.

9. Warranty & Support

For warranty information, technical support, or service inquiries, please refer to the official ABKO website or contact your retailer. Keep your proof of purchase for any warranty claims.

© 2024 ABKO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.