1. Introduction
The Growatt SPF 6000ES Plus is a multifunctional off-grid solar inverter designed for home use. It integrates an MPPT solar charge controller, a high-frequency pure sine wave inverter, and a UPS function module into a single unit. This inverter is ideal for off-grid backup power and self-consumption applications, offering flexibility to operate with or without batteries.
The complete system may require additional devices such as PV modules, a generator, or a utility grid, depending on your specific system architecture. For optimal performance and monitoring, a WIFI / GPRS module can be installed as a plug-and-play device, allowing users to monitor the PV system status remotely via mobile phone or web browser.
2. Specifications
| Feature | Specification |
|---|---|
| Model | SPF 6000 ES PLUS |
| Rated Power | 6000W |
| Max Input Power | 8000W |
| Max DC Input Voltage | 500VDC |
| Start-up Voltage | 120VDC |
| MPPT Voltage Range | 120VDC ~ 450VDC |
| Maximum Solar Charge Current | 100A |
| AC Input Voltage | 220-240 VAC |
| Output Voltage | 230V |
| Output Current | 16A |
| Output Frequency | 50/60Hz |
| Output Type | Single Phase |
| Low Loss Voltage | 170Vac±7V (UPS); 90Vac±7V (Appliances) |
| Low Loss Return Voltage | 180Vac±7V (UPS); 100Vac±7V (Appliances) |
| Inverter Efficiency | 93% |
| MPPT Efficiency | 99.9 % |
| Battery Type Compatibility | Lead Acid, Lithium |
| Battery Voltage | 48VDC |
| Dimension (mm) | 460*395*132 mm |
| Weight | 13.5 KG |
| Storage Temperature | -15°C - 60°C |
| Certification | CE, VDE0126, Greece, EN50438, EN50549, C10/C11, UTE C 15-712, IEC62116, IEC61727, IEC 60068, IEC 61683, CEI0-21, CEI 0-16, N4105, BDEW, DRRG, TOR Erzeuger G98/G99, G100, AS/NZS3100, AS4777, UNE217001, UNE206007, PO12.2, NRS 097-2-1, MEA, PEA, KSC8565 |
3. Unboxing and Inspection
Before proceeding with installation, carefully inspect the unit and its packaging for any signs of damage. Ensure all items listed below are present in the package.
3.1. Unboxing Video
Video: Unboxing the Growatt SPF 6000ES Plus inverter and its included accessories.
3.2. Package Contents
The following items should be included in your package:

Image: Diagram and list of items included in the Growatt SPF 6000ES Plus package.
- The unit (1)
- Communication cable (1)
- Current sharing cable (1)
- Parallel communication cable (1)
- MC4 connector (4)
- User manual (1)
- Protective shell (1)
- Tubular terminal (7)
- R-type terminal (1)
- O-type terminal (2)

Image: Growatt SPF 6000ES Plus inverter with various accessories laid out.
4. Setup
4.1. Hybrid Power System Overview
The Growatt SPF 6000ES Plus inverter is a core component of a hybrid power system. It manages power flow from solar panels, a utility grid, and a generator to supply home loads and charge batteries. The system can be monitored remotely via an optional WIFI/GPRS module.

Image: Hybrid Power System diagram showing connections between solar panels, utility grid, generator, battery, and home loads via the Growatt inverter.
4.2. BMS Communication in Parallel Systems
For parallel inverter systems utilizing batteries with a Battery Management System (BMS), it is crucial to establish proper communication. Connect the BMS communication cable between the battery and one inverter in the parallel setup. It is recommended to connect this cable to the master inverter of the parallel system to ensure synchronized operation and battery management.

Image: Wiring diagram for BMS communication in a parallel inverter system, highlighting the connection point for the communication cable.
5. Operating Instructions
The Growatt SPF 6000ES Plus inverter provides a pure sine wave AC output and can power loads simultaneously from solar and utility grid sources. Its integrated MPPT charge controller efficiently maximizes power harvest from solar panels within a 120V to 450V DC range.
5.1. Display and Monitoring
The inverter features a display panel for monitoring system status, input/output parameters, and operational modes. Refer to the detailed user manual (included in the package) for specific navigation and interpretation of display messages.
5.2. Battery Management
The inverter is compatible with both Lead Acid and Lithium battery types, operating at 48VDC. It supports CAN/RS485 communication for advanced BMS integration, especially important in parallel configurations. The inverter can also function without a battery, directly supplying power from solar or grid to loads.
5.3. Parallel Operation
For increased capacity or redundancy, up to 6 units of the SPF 6000ES Plus can be operated in parallel. This feature is available only when batteries are connected to the system. Ensure proper communication and load balancing as per the detailed installation guide.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Growatt SPF 6000ES Plus inverter. Always disconnect all power sources (solar, battery, grid) before performing any maintenance.
- Visual Inspection: Periodically check the inverter for any visible damage, loose connections, or signs of overheating.
- Cleaning: Keep the inverter's ventilation openings clear of dust and debris to ensure proper airflow and cooling. Use a soft, dry cloth for cleaning the exterior.
- Connection Checks: Verify that all electrical connections (DC input, AC input/output, battery, communication cables) are secure and free from corrosion.
- Firmware Updates: Check the Growatt website or contact support for available firmware updates to ensure your inverter has the latest features and bug fixes.
- Battery Health: If using batteries, monitor their health and charge status regularly as per the battery manufacturer's guidelines.
7. Troubleshooting
This section provides general guidance for common issues. For detailed troubleshooting steps, refer to the comprehensive user manual.
| Problem | Possible Cause | Solution |
|---|---|---|
| Inverter not turning on | No DC input from solar or battery; AC input not present; main switch off. | Check solar panel connections and voltage; verify battery connection and charge; ensure AC input is live; turn on main switch. |
| No AC output | Overload; short circuit; inverter fault; AC output breaker tripped. | Reduce load; check for short circuits; reset AC output breaker; consult manual for error codes. |
| Low battery charge | Insufficient solar input; battery fault; charging settings incorrect. | Check solar panel performance; inspect battery health; verify charging parameters on the inverter display. |
| Communication error | Loose communication cable; incorrect settings; module fault. | Check communication cable connections; verify communication settings; restart inverter. |
8. User Tips
- Always ensure proper grounding for safety and optimal performance.
- When connecting batteries, double-check polarity to prevent damage to the inverter and batteries.
- For parallel operation, ensure all inverters are of the same model and firmware version for stable performance.
- Utilize the remote monitoring feature (if WIFI/GPRS module is installed) to keep track of your system's performance and identify potential issues early.
9. Warranty and Support
For warranty information, please refer to the warranty card included with your product or contact your local Growatt distributor. For technical support or inquiries, please use the contact information below:
Contact: May Lin
Skype/WhatsApp/Wechat/Tel: +86 158 2480 1696
Email: sales10@livefunsunsolar.com
Web: www.livefunsunsolar.com

Image: Contact information for Livefun Solar, including a QR code for WeChat.