FUTABA T6PV 6-Channel Remote Control Set Instruction Manual

1. Introduction

The FUTABA T6PV is a high-performance 6-channel remote control system designed for various RC applications, including model cars, boats, and drones. This mid-high class transmitter incorporates advanced features from the T10PX, offering intuitive operation through its full-color display. It supports the ultra-fast "F-4G" system, enhancing operational stability and responsiveness. The T6PV is compatible with multiple communication systems: F-4G, T-FHSS, S-FHSS, and MINI-Z. The included R404SBS and R404SBS-E receivers are specifically designed for the F-4G system.

Important Note: The T6PV display is not a touch screen. Batteries are not included with the set.

2. Package Contents

The standard FUTABA T6PV set includes the following items:

• 1x FUTABA T6PV Transmitter
• 1x R404SBS or R404SBS-E Receiver (depending on the specific set)
• 1x APA-M Wheel Position Change Adapter
• 1x Bag of Mounting Screws
• 1x 32° Wheel Adapter
• 1x L Brake Lever
• 1x 5° Angle Spacer
• 1x Large Diameter Steering Wheel
• 1x UR/SR Label
• 1x Instruction Manual (English)
• 1x Hexagonal Wrench

3. Specifications

4. Setup

4.1 Battery Installation and Charging

The T6PV transmitter operates on 5 dry cell batteries (not included). It also supports various LiFe batteries. Ensure you use compatible batteries as listed in the specifications.

• For optional LT2F2000B LiFe batteries, they can be charged by removing the rubber cover located next to the battery compartment.
• The system supports the non-contact charger LF-02 for LiFe batteries.

4.2 MicroSD Card Installation

The T6PV features a microSD card slot (microSD card sold separately) for:

• Saving model data and two-way communication data.
• Storing remote control setting photos.
• Performing software updates.

Ensure the microSD card is compatible (supports SD/SDHC, not SDXC) and insert it carefully into the designated slot.

4.3 Handwheel and Grip Adjustment

The transmitter comes standard with a size M rubber grip. You can purchase and replace it with size S or L grips for personalized comfort.

• Utilize the included APA-M wheel position change adapter, 32° wheel adapter, 5° angle spacer, and large diameter steering wheel to customize the handwheel assembly and angle adjustment.
• The handwheel slot position can be adjusted using the APA adapter provided with the suit.

5. Operation

The T6PV features a full-color display and jog buttons for intuitive operation. Navigate through the menus to configure your remote control settings.

5.1 Model Menu

This menu allows management of your RC models.

• Model Selection: Choose from saved models.
• Model Reproduction: Duplicate existing model settings.
• Model Name: Assign or change names for your models.
• Delete Model: Remove model data (stored on SD card).
• Data Reset: Reset model settings to default.
• Model Type: Select initial settings suitable for different model types (Standard, 1/5 (large), Drift).

5.2 Accessory Menu

Configure various auxiliary functions and settings.

• Timer: Options include timing, fuel countdown timer, circle counting timer, and circle number navigation timer. A list of circle speeds can be recorded and viewed.
• S.BUS Servo: Special function for changing FUTABA S.BUS/S.BUS2 servo parameters.
• UR Servo Setting: Configure Ultra Response servo settings.
• ESC Connection: Set up digital speed regulators (ESC).
• Gyroscope Connection: Configure gyroscope settings.
• Index Table: Suitable for displaying an index table for 1:12 flat road vehicles.
• Gear Ratio List: Displays the final reduction ratio based on input main gear and secondary deceleration ratio.
• End/Dir Button Setting: Customize shortcut keys for commonly used menu functions.
• Main Page Setting: Customize content displayed on the main screen.
• User Menu: Create and edit a shortcut menu with frequently used functions.
• Warning Display: Configure alarms for low battery, power not turned off, and mix (mixed) warnings.

5.3 System Menu

Manage general system settings and updates.

• Display Settings: Adjust backlight brightness and dimming time.
• System Information: View user name, display language, and two-way communication status.
• Beeper: Adjust switch, fine adjustment, and jog button operating tones, as well as alarm sounds.
• Battery Setting: Adjust low voltage alarm voltage by setting the battery type.
• Total Timing: Display cumulative power-on time on the main screen.
• LED Settings: Configure indicator light brightness and lighting mode (always on, off, or linked with backlight).
• Adjustment: Correct the neutral slot position and motion angle of the steering and throttle trigger.
• Receiver Update: Update receiver firmware directly through the transmitter.

5.4 Function Introduction (General Settings)

This section covers various functional adjustments for precise control.

• Servo Preview: View the cabin action of all channels and confirm action when adjusting rudder angle and hybrid function.
• Throttle Mode: Set braking application when the throttle trigger is in a neutral slot position.
• Reverse: Set steering, throttle, 3/4 channel, and action direction when the hatchet is controlled.
• Auxiliary Fine-tuning: Fine-tune the reference center slot of the cabin hatch during model assembly.
• Wall Measures: Adjust the connecting rod, set movement amounts for steering left/right rudder angles, throttle high slots/brake sides, and upper/lower movements of the 3/4 channel and other spare channels.
• Full-Control Protection: When the receiver loses the remote control signal or battery voltage drops, the system sets the action slot position of the cabin. When the signal reconnects, the out-of-control protection, lock, and off mode will automatically release.
• Acceleration: Adjust response characteristics of throttle forward/brake separately in the neutral area.
• Fine-tuning/Button Settings: Configure functions for digital fine-tuning (DT1-DT6) and knob (DL1).
• Switch Setting: Choose and set functions and operating methods for key switches (SW1-SW3).
• Idle Speed Adjustment: Improve engine starting performance for GP cars/boats. Ensure ESC is identified and neutral slot setting is correct for this function.
• Engine Flameout: Move the throttle hatcher to the preset slot setting to shut down the engine.
• Reaction Speed: Adjust steering gear response for softer or more aggressive control.

5.5 Care Menu (Racing Settings)

This menu provides advanced settings for racing performance.

• Curve (EXP): Independently set the response curve for steering, throttle, and brake.
• Speed: Independently set the speed characteristics of steering and throttle.
• Traction Control: Achieve smooth control by intermittent throttle action, driving at the ideal route. Simulate engine sound for speed limiters in drift cars.
• A.B.S.: In 4WD vehicles, ABS prevents insufficient steering during braking in curves.
• Start: Gently pull the throttle trigger; the system automatically switches to preset slot settings for smooth starts.
• Engine Flameout: Move the throttle hatcher to the preset slot setting to realize engine shutdown.
• Reaction Speed: Adjust steering gear response for softer or more aggressive control.

5.6 Mixed Control Menu

Configure various mixing functions for complex control setups.

• Steering Hybrid Control
• Brake Hybrid Control
• Gyroscope Hybrid
• 4WA Hybrid Control
• Dual ESC-CPS Hybrid Control
• Track Hybrid Control
• Program Mixing Control
• Mixed Winch Control: Adjust winch receive and place values, and throttle/winch mixing.

6. Maintenance

• Cleaning: Keep the transmitter and receiver clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using harsh chemicals or solvents.
• Storage: Store the unit in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods to prevent leakage.
• Software Updates: Regularly check the manufacturer's website for firmware updates. Updates can be performed via the microSD card slot on the transmitter.
• Battery Care: If using rechargeable batteries, follow the manufacturer's guidelines for charging and discharging to maximize battery life.

7. Troubleshooting

This section addresses common issues you might encounter with your T6PV remote control set.

8. User Tips

• Optimize Display: Take advantage of the full-color, high brightness display for clear visibility in various lighting conditions.
• Efficient Navigation: Utilize the jog buttons for quick and precise adjustments within the menus.
• Personalize Settings: Customize the main page display and create a 'User Menu' with your most frequently used functions for faster access.
• Backup and Update: Regularly back up your model data to a microSD card and keep the transmitter firmware updated for optimal performance and new features.
• Grip Comfort: Experiment with different grip sizes (S, M, L) and handwheel adapters to find the most comfortable and ergonomic setup for extended use.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the original seller or the manufacturer, FUTABA, directly. Keep your proof of purchase for any warranty claims.

Manufacturer: FUTABA

Seller: SHENZHEN MODEL FANS ELECTRONIC CO., LTD

Refer to the official FUTABA website or your purchase documentation for specific warranty terms and contact details.