1. Introduction
The Hiworld LD01.10 CAN Bus Decoder is designed to integrate your car's original CAN Bus data with an aftermarket Android Head unit. This device enables features such as original car steering wheel button control, enhancing your driving experience by allowing seamless interaction between your vehicle's systems and your Android multimedia system.
2. Safety Information
- Operating Voltage: Ensure the operating voltage is within the range of +9V to +16V. Voltages outside this range (too low or too high) can cause irreversible damage to the decoder.
- Professional Installation: Wiring requires professional knowledge. Improper wiring can damage the CAN Bus decoder and potentially other vehicle components. If you are unsure, please consult a qualified professional or contact support before attempting installation.
- Cable Compatibility: This product does not include cables. Ensure you use compatible 16-pin and 20-pin connectors with a pin pitch of 2.0mm.
3. Product Overview
The Hiworld LD01.10 is a compact CAN Bus data converter designed for specific Lada models. It facilitates communication between your vehicle's CAN Bus system and an Android Head unit, enabling the use of original steering wheel controls.
4. Specifications
| Attribute | Value |
|---|---|
| Model Name | LD01.10 |
| Special Features | CAN Bus Data Converter |
| Item Weight | 40g |
| Item Size | 75mm x 45mm x 17mm |
| Voltage | 12 V |
| Interface | 16pin/20pin |
| Item Type | Cables, Adapters & Sockets |
| Material | Black plastic shell |
| Manufacturer | Hiworld |
| Function | Supports original car steering wheel button control |
5. Compatibility
5.1. Compatible Android Head Units
This CAN Bus decoder is compatible with 7, 8, 9, and 10-inch Android Head units that feature 8-pin connectors and support serial communication.
5.2. Suitable Car Models
The LD01.10 CAN Bus Decoder is designed for the following Lada vehicle models:
- Lada Granta: 2011 to Present
- Lada Vesta: 2015 to 2022
- Lada XRAY: 2015 to 2022
- Lada Largus: 2012 to Present
6. Setup and Installation
6.1. Pre-Installation Checks
- This product does not include connection cables. If you do not have suitable cables, it is recommended to purchase them along with the CAN Bus box.
- Verify that your Android Head unit has an 8-pin connector and supports serial communication for compatibility with this CAN Bus box.
- Before purchasing, operate your Android radio to enter the CAN Bus setting screen and confirm that your car model name can be displayed.
6.2. Wiring Connection
Step 1: Connect the CAN Bus Decoder to the Cable Harness.
- Identify the 16-pin and 20-pin CAN plugs on your wire harness.
- Plug these into the corresponding 16-pin and 20-pin sockets of the CAN Bus Box.
- Strictly follow the pin function description provided in the pin definition chart for correct wiring. Incorrect wiring can damage the CAN Bus decoder.
6.3. Android Head Unit Configuration
Step 2: Set up CAN Bus on the Android Head unit.
The exact setup method may vary between different Android Head unit models. The following steps demonstrate a common procedure. If you encounter difficulties, please consult your head unit vendor's manual or support.
- Enter Settings: Navigate to the main settings menu on your Android Head unit.
- Enter Factory Settings: Look for an option like 'Factory Settings' or 'Car Settings'. You may be prompted for a password. Common factory passwords include: 3368, 1617, 8317, 8888. If these do not work, please consult the seller of your Android radio for the correct password.
- Enter CAN Bus Setting: Within the factory settings, find the 'CAN Bus Setting' or 'CarType Setting' option.
Step 3: Select CAN Bus Box Manufacturer & Correct Car Model.
- Select Manufacturer: From the CAN Bus settings, select 'Hiworld' as the CAN Bus Box manufacturer.
- Select Car Model: Choose the correct car model and year from the list (e.g., LADA_W01 (LADA 2023 VESTA)).
- Save and Reboot: Save your settings and reboot the Android Head unit for changes to take effect.
7. Operation
Once correctly installed and configured, the Hiworld LD01.10 CAN Bus Decoder will enable your Android Head unit to communicate with your vehicle's CAN Bus system. The primary function is to support the original car's steering wheel button controls, allowing you to manage your multimedia system without taking your hands off the wheel.
8. Troubleshooting
- No Steering Wheel Control:
- Double-check all wiring connections according to the pin definition chart (Figure 8). Ensure no pins are bent or incorrectly inserted.
- Verify the CAN Bus settings on your Android Head unit (Section 6.3). Ensure 'Hiworld' is selected as the manufacturer and the correct car model is chosen.
- If you used a factory password for settings, confirm it was correct. If unsure, consult your Android radio seller.
- Decoder Not Powering On/Damaged:
- Check the input voltage to ensure it is within the +9V to +16V range.
- Improper wiring is a common cause of damage. Review your connections carefully.
- Car Model Not Listed in Android Head Unit Settings:
- Ensure your Android Head unit firmware is up to date.
- Contact the seller of your Android Head unit or the Hiworld support for assistance, as the head unit might require a specific update or configuration file.
9. User Tips
No specific user tips are available from reviews or Q&A at this time. Always ensure professional installation for optimal performance and to prevent damage.
10. Support and Warranty
For any questions or issues regarding the Hiworld LD01.10 CAN Bus Decoder, please contact the seller or manufacturer directly. They are committed to providing professional after-sale service and will assist you until a satisfactory resolution is found.