1. Product Overview
The Xiaomi Smart Air Purifier Elite Y-600 (BHR6359EU) is a high-performance air purification system designed to provide clean and healthy indoor air. It features advanced triple filtration, UV-C LED sterilization, and plasma technology to effectively remove various airborne pollutants, including odors, allergens, bacteria, and viruses.
Xiaomi Smart Air Purifier Elite EU, highlighting its 600 m³/h formaldehyde CADR, 99.9% H1N1 removal, and 20.2 dB low noise level.
2. Setup
2.1 Unpacking
Carefully remove the air purifier and all accessories from the packaging. Retain the packaging for future storage or transport.
2.2 Filter Installation
The air purifier utilizes a multi-layer triple filtration system. Ensure the filter is correctly installed before first use.
- Open the filter compartment cover, usually located at the bottom or rear of the unit.
- Remove the new filter from its protective packaging.
- Insert the filter into the compartment, ensuring it is seated firmly.
- Close the filter compartment cover securely.
The multi-layer triple filtration system.
2.3 Placement
Place the air purifier on a flat, stable surface, ensuring adequate space around the unit for optimal airflow. For best performance, avoid placing it directly against walls or in corners. The purifier is effective for areas up to 125 square meters.
Visual representation of the air purifier's coverage in different rooms, indicating a maximum area of 125 sq.m and air output of 1000 L/min.
2.4 Power Connection
Connect the power cord to the air purifier and then plug it into a standard 220V electrical outlet.
2.5 App Connection (Xiaomi Home App)
For smart control features, download the Xiaomi Home app on your smartphone and follow the in-app instructions to connect your air purifier. This allows remote activation and filter replacement reminders.
Smart control via the Xiaomi Home App.
3. Operating Instructions
3.1 Power On/Off
Press the power button on the OLED display to turn the unit on or off.
3.2 OLED Display and Controls
The intuitive OLED display provides real-time air quality information and allows for easy control of the purifier's functions.
Detailed view of the OLED display and control buttons, including plasma on/off, UV indicator, PM2.5 value, display on/off, large particle indicator, and mode switch.
- Plasma On/Off Button: Activates or deactivates the plasma generator.
- UV Radiation Indicator: Shows the status of the UV-C LED.
- PM2.5 Value: Displays the current PM2.5 particle concentration.
- Display On/Off Button: Toggles the screen display. When off, buttons remain slightly backlit.
- Large Particle Indicator: Indicates the presence of larger airborne particles.
- Mode Switch Button: Cycles through different operating modes (e.g., Auto, Sleep, Manual).
3.3 Air Quality Monitoring
The air purifier features a dual-action PM2.5/PM10 sensor that provides real-time monitoring of air quality. The display indicator will show current particle levels.
Illustration of the dual-action PM2.5/PM10 sensor detecting various particle sizes in the air.
3.4 Special Features
- Odor Removal: Activated carbon with high iodine content combined with plasma technology effectively removes various odors, including pet odors, kitchen odors, cigarette smoke, and trash can odors.
- UV-C LED & Plasma Technology: The built-in UV-C LED and plasma generator work together to effectively remove 99.9% of bacteria and viruses, including influenza A (H1N1).
- Low Noise Operation: Designed for quiet operation, especially in Sleep mode, where noise levels can be as low as 20.2 dB(A). The display can be turned off for undisturbed sleep.
Effective odor removal using activated carbon and plasma, covering pet odors, kitchen odors, cigarette smoke, and trash can odors.
UV-C LED and plasma technology for 99.9% removal of influenza A (H1N1) virus.
Low noise operation in sleep mode (20.2 dB(A)) with display off option for undisturbed sleep.
4. Maintenance
4.1 Filter Replacement
The high-efficiency filter has a lifespan of approximately 10-14 months, depending on usage and air quality. The Xiaomi Home app will provide reminders for filter replacement.
- Turn off and unplug the air purifier.
- Open the filter compartment.
- Remove the old filter and dispose of it properly.
- Install a new genuine Xiaomi filter (refer to section 2.2).
- Close the filter compartment.
- Reset the filter life indicator via the app or control panel if applicable.
Detailed design features: filter life (10-14 months), removable top grille for cleaning, and stylish metal finish.
4.2 Cleaning the Unit
- Exterior: Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Top Grille: The top grille is removable for easier cleaning of the air duct. Ensure the unit is unplugged before removing and cleaning.
- Sensors: Periodically clean the air quality sensors (PM2.5/PM10) according to the instructions in the Xiaomi Home app or the full manual to ensure accurate readings.
5. Troubleshooting
If you encounter issues with your air purifier, please refer to the following common problems and solutions:
- Unit does not power on: Ensure the power cord is securely plugged into both the unit and a working 220V outlet.
- Poor air quality readings: Clean the PM2.5/PM10 sensors. Ensure the filter is not clogged and replace if necessary.
- Unusual noise: Check if the filter is correctly installed. Ensure no foreign objects are obstructing the fan.
- App connectivity issues: Ensure your Wi-Fi network is stable and the air purifier is within range. Restart both the purifier and your router, then try reconnecting via the Xiaomi Home app.
For persistent issues, please contact customer support.
6. Specifications
| Feature | Specification |
|---|---|
| Brand | XIAOMI |
| Model | Elite Y-600 BHR6359EU |
| Style | Air Purifier |
| Application Area | 10-20m³ (typical) |
| Max Coverage Area | Up to 125 m² |
| Usage Condition | Household |
| Type | Plasma |
| Function | Deodorization |
| Power (W) | 60W |
| Air Volume | 600m³/h |
| Max Purified Air Output | 10,000 liters/minute |
| Voltage | 220 V |
| Noise Level | ≤50dB (20.2 dB in Sleep Mode) |
| H1N1 Removal | 99.9% |
| Filtration Type | Triple Filtration (effective for particles up to 0.3 microns) |
| Filter Life | 10-14 months |
| Sensors | Dual-action PM2.5/PM10 |
| Sterilization | UV-C LED, Plasma Generator |
| Connectivity | Xiaomi Home App |
| Origin | Mainland China |
6.1 Filter Technology Comparison
Comparison of Xiaomi's high-efficiency filter vs. traditional HEPA filter, highlighting cleaner air, lower noise, and reduced energy consumption for Xiaomi.
6.2 Allergy Care Certification
The Xiaomi Smart Air Purifier Elite Y-600 holds TÜV Rheinland Allergy Care Certification.
7. User Tips
- Optimal Placement: For best results, place the purifier in the room where you spend the most time, ensuring it's not obstructed.
- Regular Filter Checks: While the app reminds you, a quick visual check of the filter every few months can help maintain peak performance.
- Utilize Smart Features: Take advantage of the Xiaomi Home app to schedule purification, monitor air quality remotely, and receive timely filter replacement notifications.
- Sleep Mode: Use the dedicated Sleep mode and turn off the display for an undisturbed night's rest while maintaining air quality.
8. Warranty & Support
Your Xiaomi Smart Air Purifier Elite Y-600 (BHR6359EU) is covered by a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions.
For technical support, service, or warranty claims, please contact Xiaomi customer service through their official website or the contact information provided in your product documentation.
