1. Introduction
Thank you for choosing the Mikenoon RGB LED Strip Lights. This product is designed to enhance visibility and safety for electric scooters, bikes, and skateboards during night riding. Its vibrant RGB lighting not only adds a stylish touch but also serves as a crucial warning light for other road users. Please read this manual carefully before installation and use to ensure proper function and safety.
2. Safety Warnings
- Do not use this product near fire.
- If there is a knot in the LED strip during use, please do not pull it hard.
- Do not disassemble the product without authorization.
- If you do not use this product for a long time, please cut off the power.
- Do not connect the rope light to the power supply while it is in the packing or wound onto a reel.
- Do not use the rope light when covered or recessed into a surface.
- Please use a standard safe power supply to power the product.
WARNING: Suffocation Hazard
To avoid danger of suffocation, keep this plastic bag away from babies and children. Do not use this bag in cribs, beds, carriages or playpens. This bag is not a toy.
3. Product Information
The Mikenoon RGB LED Strip Lights are designed for durability and high visibility. The light strips are coated with protective resin for enhanced longevity.
Key Features:
- LED Type: RGB 5050 LED Strip Lights
- Power Source: Battery box (requires 4 * AA Batteries, not included)
- Length: 2 * 0.5m LED strips
- LED Count: 15 lights per 0.5m strip
- Application: Suitable for Electric Scooters, Bikes, Skateboards, and similar personal mobility devices.
4. Setup and Installation
Follow these steps to properly install your RGB LED Strip Lights:
- Prepare the Surface: Ensure the surface where you intend to apply the LED strips (e.g., scooter deck, bike frame) is clean, dry, and free of dust or grease.
- Apply Adhesive: Use the provided upgrade stickers (adhesive) to secure the LED strips. Peel off the backing and carefully press the strips onto the desired location.
- Attach LED Strips: Firmly press the LED strips along the chosen path.
- Adjust Length (Optional): If the strips are too long, you can cut them at designated cut marks (usually indicated by a scissor icon) to fit your device.
- Insert Batteries: Open the battery box and insert 4 AA batteries (not included), ensuring correct polarity.
- Connect Components: Connect the LED strips to the controller, and then connect the controller to the battery box. Ensure the arrows on the connectors align for proper functionality.
- Secure Battery Box: Place the battery box in the provided bag and secure it to your scooter or bike using the bag's attachment mechanism.
5. Operating Instructions
The LED strip lights are controlled by a simple 3-key controller:
- MODE/DEMO Button: Press this button to cycle through different dynamic lighting modes.
- SPEED Button:
- In dynamic mode: Press to adjust the speed of the lighting effects.
- In static mode: Press to adjust the brightness of the static color.
- Long Press (2 seconds): Press and hold this button for 2 seconds to turn the lights ON or OFF.
- COLOR Button: Press this button to change the static color of the LED strips.
Visual Demonstration:
6. Maintenance
- Cleaning: Gently wipe the LED strips with a soft, damp cloth to remove dirt. Avoid using harsh chemicals or abrasive materials.
- Battery Box: Ensure the battery box remains dry. If it gets wet, open it, remove the batteries, and allow it to dry completely before reinserting batteries.
- Battery Replacement: Replace all 4 AA batteries when the lights dim or stop working. Do not mix old and new batteries.
- Storage: When not in use for extended periods, remove the batteries from the battery box and store the product in a cool, dry place.
7. Troubleshooting
- Lights not turning on:
- Check if the 4 AA batteries are correctly installed and have sufficient charge.
- Ensure all connections (strips to controller, controller to battery box) are secure and arrow-to-arrow alignment is correct.
- Long press the SPEED button for 2 seconds to turn the lights on.
- Lights flickering or dim:
- Replace the AA batteries with fresh ones.
- Check for loose connections.
- Lights not changing mode or color:
- Ensure the controller buttons are being pressed firmly and correctly.
- Check for any damage to the controller or its wiring.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Mikenoon |
| Model Number | RGB01 |
| Item Type | Strip |
| LED Type | RGB 5050 LED Strip Lights |
| Strip Type | SMD |
| LEDs Number/M | 0.5m 15 lights |
| Power Consumption (W/m) | 2.88W/m |
| Voltage | 5V |
| Nominal Voltage | 5V |
| Power Source | DC (4*AA Batteries, not included) |
| Is Batteries Included | No |
| Average Life (hrs) | 50000 hours |
| Luminous Flux | <60 |
| Waterproof | No |
| Color Temperature (K) | RGB |
| Is Smart Device | No |
| Power Generation | Switch |
| Certification | CE, EMC, ROHS |
| Origin | Mainland China |
| Package Length | 15 cm |
| Package Width | 15 cm |
| Package Height | 3 cm |
| Package Weight | 0.1 kg |
9. User Tips
- Battery Usage: The LED strip lights are powered by 4 AA batteries (not included). They are not rechargeable via a USB port or other charging methods. Ensure you have fresh AA batteries for optimal performance and to avoid unexpected power loss during night rides.
- Visibility: While these lights significantly improve visibility, always exercise caution and adhere to local traffic laws when riding at night. Consider combining with other safety gear.
- Application: The flexible design allows for creative placement on various personal mobility devices. Experiment with different positions to find the most effective and aesthetically pleasing setup for your scooter, bike, or skateboard.
10. Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact the seller directly through your purchase platform. Keep your order details handy for faster assistance.
For detailed instructions and further information, please refer to the official user manual PDF: User Manual (PDF)
