1. Introduction
The XY-T3002P is a high-performance Bluetooth Stereo Digital Amplifier Board featuring the TPA3255 chip. Designed to deliver clear and delicate audio, it supports a wide range of audio input methods and offers convenient control via a multi-functional knob and a dedicated mobile application. This manual provides detailed instructions for assembly, setup, operation, and maintenance of your amplifier board.

Figure 1: XY-T3002P Bluetooth Audio Power Amplifier
2. Package Contents
Please check the package for the following items:
- 1x Power Amplifier Board (XY-T3002P)
- 1x Screwdriver
- 3x Knobs (for Volume, Treble, Bass)
- 4x Brass Standoffs
- 4x Screws

Figure 2: Included components in the package
3. Assembly Instructions
The XY-T3002P amplifier board is shipped unassembled. Follow these steps to assemble the unit:
- Attach Standoffs: Secure the four brass standoffs to the main circuit board using the provided screws.
- Attach Top Plate: Carefully align the top protective plate with the standoffs and secure it with the remaining screws.
- Install Knobs: Push the three silver knobs onto the potentiometer shafts for Volume, Treble, and Bass control.

Figure 3: Assembled amplifier board
4. Initial Setup and Connections
Before powering on, ensure all connections are made correctly.
4.1. Connecting Speakers
Connect your passive speakers to the L&R Speaker terminals on the amplifier board. Ensure correct polarity (positive to positive, negative to negative) for each channel (Left and Right).
Video 1: Demonstrates connecting speakers to the amplifier board.
4.2. Power Connection
Connect a DC power supply (19-51V / 10A or above) to the DC19-51V input port. Ensure the power supply meets the specified voltage and current requirements for optimal performance.

Figure 4: Ports and functions, showing speaker and power connections.
4.3. External Antenna (Optional)
For enhanced Bluetooth range and stability, an external 2.4GHz antenna can be installed via the first-generation IPEX interface (antenna not included).
5. Operating Instructions
5.1. Power On/Off
Long-press the multifunction knob (Volume knob) to power the amplifier board on or off. An indicator light will blink upon power-on.
5.2. Audio Input Methods
The amplifier supports multiple audio input methods:
- Bluetooth 5.2: Wireless connection from your smartphone or other Bluetooth-enabled devices.
- AUX Input: Connect via a 3.5mm audio cable.
- USB Audio: Connect a USB flash drive or use it as a USB sound card from a computer.

Figure 5: Visual representation of available audio input methods.
5.3. Bluetooth Pairing
- Power on the amplifier board. The Bluetooth indicator will blink.
- On your mobile device, go to Bluetooth settings.
- Search for available devices and select "XinYi" to pair.
- Once paired, the indicator will stop blinking, and you can play audio.
Video 2: Demonstrates Bluetooth pairing and music playback.
5.4. Multifunction Knob Operations
The Volume knob serves multiple functions:
- Click: Pause/Play audio.
- Double-click: Skip to the next track.
- Triple-click: Go back to the previous track.
- Four clicks: Switch audio input mode (Bluetooth, AUX, USB).
- Long-press: Power on/off the device.
5.5. Volume, Treble, and Bass Adjustment
Use the dedicated potentiometers (knobs) to adjust the overall volume, treble, and bass levels to your preference.
5.6. APP Control
The amplifier board supports control via a mobile application. Search and pair "XYV122UE" (or similar device name) in the app to control various functions, including changing the Bluetooth name, setting a pairing password, managing USB flash drive music lists, and adjusting the equalizer (EQ).
6. Specifications
| Parameter | Value |
|---|---|
| Product Name | BT Digital Audio Amplifier Board |
| Product Model | XY-T3002P |
| Power Supply | DC19-51V / 10A or above |
| BT Version | 5.2 |
| Audio Input | BT / AUX / U disk / USB sound card |
| BT Audio Decoding | AAC SBC |
| USB Lossless Decoding | WAV FLAC APE MP3 |
| Output Power (Left & Right Channel) | 30W+30W @ 8Ω/24VDC 70W+70W @ 4Ω/24VDC 80W+80W @ 8Ω/36VDC 160W+160W @ 4Ω/36VDC 160W+160W @ 8Ω/50VDC 300W+300W @ 4Ω/50VDC |
| Dimensions (L x W x H) | 136.5mm x 100mm x 40mm (5.37in x 3.94in x 1.57in) |
| Knob Size | 17mm / 0.67in |
6.1. Internal Components Overview

Figure 6: Key audio components including capacitor array, solid capacitance, audio special inductors, low-loss coupling, BT chip, large heat sink + fan, and audio capacitance.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the amplifier board. Avoid using liquid cleaners or solvents.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Ventilation: Ensure adequate airflow around the amplifier board, especially around the heat sink and fan, to prevent overheating.
- Component Care: Avoid touching the electronic components directly to prevent static discharge damage.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound output | Incorrect speaker connection, no power, wrong input mode, low volume. | Check speaker wiring polarity. Ensure power supply is connected and switched on. Verify correct audio input mode. Increase volume. |
| Bluetooth not connecting | Amplifier not in pairing mode, device too far, interference. | Ensure amplifier is powered on and Bluetooth indicator is blinking. Move device closer. Restart amplifier and mobile device. |
| Distorted sound | Volume too high, poor audio source quality, impedance mismatch. | Reduce volume. Try a different audio source. Ensure speakers are compatible with amplifier output impedance. |
| APP not connecting | Bluetooth not paired, APP permissions. | Ensure Bluetooth is successfully paired. Check APP permissions (e.g., location access) on your mobile device. |
9. User Tips
- For the best audio experience, use a stable power supply that meets or exceeds the recommended 10A current.
- Experiment with the Treble and Bass knobs to fine-tune the sound to your listening environment and personal preference.
- When using the USB Audio input, ensure your USB flash drive contains compatible lossless audio formats like WAV, FLAC, or APE for superior sound quality.
- If experiencing any issues, a quick power cycle (turning off and on) can often resolve minor glitches.
10. Frequently Asked Questions (FAQ)
Q: What kind of speakers can I connect?
A: You can connect passive speakers. Ensure their impedance matches the amplifier's output capabilities (e.g., 4Ω or 8Ω) and that their power handling is appropriate for the amplifier's output.
Q: Can I use a power supply with less than 10A?
A: While the board might function with a lower current power supply, it is recommended to use 10A or above to ensure stable performance and to achieve the maximum rated output power without distortion, especially at higher volumes.
Q: How do I switch between audio input modes?
A: Quickly press the multifunction knob four times to cycle through the available input modes (Bluetooth, AUX, USB).
11. Warranty and Support
For detailed warranty information and technical support, please refer to the official user manual PDF available for download. This document contains comprehensive information regarding product guarantees and service procedures.
You can access the user manual PDF here.