Product Overview
The JONSBO V12 is a desktop-grade M-ATX chassis designed to combine aesthetic appeal with functional hardware display. It features glass side panels and solid wood trim, offering a 270° panoramic view of your internal components. The case is equipped with standard 12cm luminous fans on the front panel to ensure balanced heat dissipation and a visually appealing setup.


Specifications
| Feature | Specification |
|---|---|
| Product Model | V12 |
| Color Options | Black, White |
| Case Dimensions (W*D*H) | 280mm * 301mm * 275.5mm (including foot pads) |
| Case Weight | 5.52kg |
| Material | 1.0mm SGCC steel plate, 8mm North American walnut wood, 4mm glass |
| Motherboard Form Factor | MicroATX, ITX |
| Chassis Type | Desktop |
| Power Supply Type | ATX |
| Power Supply Mounting | Bottom |
| Max PSU Length | ≤ 140mm (with front HDD rack) / ≤ 220mm (without front HDD rack) |
| Max CPU Cooler Height | ≤ 145mm |
| Max GPU Length | ≤ 260mm |
| Internal Drive Bays | 3.5" HDD * 2 + 2.5" SSD * 1 OR 3.5" HDD * 1 + 2.5" SSD * 2 |
| Front I/O Ports | USB3.2 Gen2 Type-C * 1, USB3.0 * 1, AUDIO * 1 + MIC * 1 (2-in-1) |
| Side Panel | Double bending integrated glass with a large curvature |
| Dust Filters | Bottom (Magnetic suction) |
| Standard Fans | Front panel 120mm * 2 |
| Optional Fans | Rear window 92mm * 1, 80mm * 1 |


Setup and Installation
This section provides general guidelines for installing components into your JONSBO V12 M-ATX Desktop Case. Always refer to your individual component manuals for specific installation instructions.
1. Motherboard Installation
The V12 case supports MicroATX and ITX motherboards. Carefully align your motherboard with the standoffs inside the chassis and secure it with screws.

2. CPU Cooler Installation
Ensure your CPU cooler's height does not exceed 145mm. Install the CPU cooler according to its manufacturer's instructions before or after motherboard installation, depending on the cooler type.
3. Graphics Card (GPU) Installation
The case supports graphics cards up to 260mm in length. Insert your GPU into the appropriate PCIe slot on your motherboard and secure it.

4. Power Supply (PSU) Installation
The V12 supports ATX power supplies. The PSU is bottom-mounted. If your PSU is longer than 140mm, you may need to remove the front hard drive rack to accommodate units up to 220mm in length.
5. Drive Installation
The case offers flexible storage options: either two 3.5" HDDs and one 2.5" SSD, or one 3.5" HDD and two 2.5" SSDs. Install your drives into the designated bays and secure them.

6. Fan Installation
The front panel comes standard with two 120mm fans. For enhanced cooling, you can install an optional 92mm fan and an 80mm fan in the rear window area.

7. Connecting Front Panel I/O
Connect the front panel cables (USB3.2 Gen2 Type-C, USB3.0, AUDIO, MIC, Power Switch) to the corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

Operating Instructions
Once all components are correctly installed and connected, you can begin operating your PC.
- Power On/Off: Use the power button located on the front panel to turn your system on or off.
- Front Panel Ports: Utilize the USB 3.2 Gen2 Type-C, USB 3.0, and combined Audio/Mic ports for connecting peripherals and audio devices.
Maintenance
Regular maintenance helps ensure optimal performance and longevity of your PC components.
- Dust Filter Cleaning: The JONSBO V12 features a magnetic suction dust net on the bottom. Regularly remove and clean this filter to prevent dust buildup inside the case.
- General Cleaning: Use a soft, dry cloth to clean the exterior surfaces of the case, including the glass panels and wooden trim. For internal cleaning, use compressed air to remove dust from fans and components.

Troubleshooting
Here are some common issues and their potential solutions:
- CPU Cooler Does Not Fit: Verify your CPU cooler's height against the maximum clearance of 145mm. If it exceeds this, you will need a smaller cooler.
- Power Supply Does Not Fit: Check the length of your ATX power supply. If it is between 140mm and 220mm, ensure the front hard drive rack has been removed to provide the necessary space.
- No Power/System Not Starting: Double-check all power connections from the PSU to the motherboard, CPU, GPU, and drives. Ensure the front panel power switch cable is correctly connected to the motherboard header.
- Poor Airflow/Overheating: Ensure all installed fans are spinning correctly. Clean dust filters and internal components. Consider adding optional rear fans if temperatures remain high.
User Tips
- Maximize PSU Space: For larger ATX power supplies (up to 220mm), remember to remove the front hard drive rack to create sufficient space.
- Optimal Cooling: Utilize the standard front 120mm fans and consider adding optional rear 92mm and 80mm fans for enhanced airflow, especially with high-performance components.
- Showcase Your Build: The 270° hyperbolic side penetrating multi-angle glass allows for an excellent view of your hardware. Plan your component layout and cable management to take advantage of this feature.
Warranty and Support
Your JONSBO V12 M-ATX Desktop Case comes with a 1-year warranty from our store. For any product-related inquiries, technical assistance, or warranty claims, please contact our customer support. All emails will be answered within 24 hours.