AVHRIT AT1000

Contents

Avhrit 1000 N.M Brushless Cordless Impact Wrench

Model: AT1000

User Manual

1. Introduction

Thank you for choosing the Avhrit 1000 N.M Brushless Cordless Impact Wrench. This powerful and versatile tool is designed for a wide range of applications, from automotive repair to heavy equipment maintenance. Featuring a high-efficiency brushless motor, robust torque, and long-lasting batteries, it provides reliable performance for demanding tasks. This manual provides essential information for the safe operation, setup, and maintenance of your impact wrench.

2. General Safety Instructions

Always follow basic safety precautions when using electric tools to reduce the risk of fire, electric shock, and personal injury.

  • Read all instructions carefully before operating the tool.
  • Wear appropriate personal protective equipment (PPE), including safety glasses, gloves, and hearing protection.
  • Keep your work area clean and well-lit. Cluttered or dark areas invite accidents.
  • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
  • Keep children and bystanders away while operating a power tool.
  • Ensure the battery is fully charged before use.
  • Do not expose power tools to rain or wet conditions.
  • Store idle tools out of reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
  • Always disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.

3. Package Contents

Carefully unpack your Avhrit Impact Wrench and check that all items are present and in good condition. If any items are missing or damaged, please contact customer support.

Avhrit Impact Wrench Kit with accessories
Figure 1: Complete Avhrit Impact Wrench Kit including the wrench, two batteries, charger, sockets, extension bar, and storage case.
  • 1 x Avhrit 1/2" Brushless Cordless Impact Wrench
  • 2 x 4.0Ah Lithium-Ion Batteries (8000mAh total capacity)
  • 1 x Quick Charger
  • 4 x Impact Sockets (17 mm, 19 mm, 21 mm, 24 mm)
  • 1 x 5-inch Extension Bar
  • 1 x Customized Storage Case
  • 1 x User Manual

4. Technical Specifications

Feature Specification
Model AT1000
Max. Torque 1000 N.m (738 Ft-Lbs)
Motor Type Brushless
Battery Voltage 21V (Nominal)
Battery Capacity 2 x 4.0Ah Lithium-Ion (8000mAh total)
No-Load Speed (3 Modes) 0-1200 RPM / 0-1500 RPM / 0-2000 RPM
Chuck Size 1/2 inch Square Drive
Certification CE
Features LED Work Light, Forward/Reverse Switch, Brake Stop Mode, Battery Capacity Indicator

5. Setup and Assembly

5.1. Charging the Battery

The impact wrench comes with two 4.0Ah Lithium-Ion batteries and a quick charger. Ensure batteries are fully charged before first use for optimal performance.

  1. Connect the quick charger to a standard power outlet.
  2. Slide the battery pack onto the charger until it clicks into place.
  3. The charger's indicator light will show the charging status (refer to charger manual for specific light patterns).
  4. Once fully charged, remove the battery from the charger. Do not overcharge.
Avhrit Impact Wrench with 8000mAh battery and charger
Figure 2: The 8000mAh high-capacity battery and quick charger provide continuous work.

5.2. Installing/Removing the Battery

  1. To install: Align the battery pack with the base of the impact wrench and slide it in until it locks securely.
  2. To remove: Press the battery release button (usually on the sides of the battery) and slide the battery pack out.

5.3. Attaching Impact Sockets and Extension Bar

  1. Ensure the tool is off and the battery is removed before attaching or removing accessories.
  2. Push the desired impact socket (17mm, 19mm, 21mm, or 24mm) or the 5-inch extension bar onto the 1/2-inch square drive anvil until it snaps into place.
  3. To remove, pull the socket or extension bar firmly off the anvil.

6. Operating Instructions

6.1. Powering On/Off

The tool is activated by pressing the trigger switch. The speed is variable depending on how far the trigger is pressed. Release the trigger to turn off the tool.

6.2. Forward/Reverse Switch and Brake Stop Mode

The forward/reverse switch allows you to change the rotation direction for tightening or loosening fasteners.

Forward and Reverse switch operation on impact wrench
Figure 3: Use the forward (F) position to tighten nuts and the reverse (R) position to loosen them.
  • Forward (Tighten): Push the switch to the left (typically) for clockwise rotation to tighten nuts.
  • Reverse (Loosen): Push the switch to the right (typically) for counter-clockwise rotation to loosen nuts.
  • Brake Stop Mode (Reverse): When operating in reverse, once the nut or bolt is loosened, the tool automatically activates a brake, reducing speed and torque to prevent the fastener from flying off.
  • Lock Position: Center the switch to lock the trigger and prevent accidental startup.

6.3. 3-Mode Speed Control

The impact wrench features three adjustable speed settings to match the application requirements. Use the mode button (often labeled "MODE" or with a gear icon) to cycle through the speeds.

3-mode speed control settings for impact wrench
Figure 4: The 3-mode speed control allows selection between 0-1200 RPM (Low), 0-1500 RPM (Medium), and 0-2000 RPM (High) for optimal torque and speed.
  • Low Speed (0-1200 RPM): Ideal for delicate tasks or when precise control is needed.
  • Medium Speed (0-1500 RPM): Suitable for general fastening and loosening tasks.
  • High Speed (0-2000 RPM): Provides maximum power for stubborn bolts and heavy-duty applications.

6.4. LED Work Light

An integrated LED work light illuminates the work area, providing increased visibility in low-light conditions or confined spaces.

Impact wrench with LED light illuminating work area
Figure 5: The LED light enhances visibility, making it easier to work in dark environments.

6.5. Versatile Applications (3-in-1 Functionality)

The Avhrit impact wrench is a multifunctional tool capable of more than just impact wrenching. With appropriate accessories (not all included), it can also function as a screwdriver or drill.

3-in-1 multifunctional tool: impact wrench, screwdriver, drill
Figure 6: The tool can be used as an impact wrench, screwdriver, or drill with suitable attachments.
  • Impact Wrench: For tightening and loosening nuts and bolts on vehicles, machinery, and construction.
  • Screwdriver: With a suitable adapter and screwdriver bits, it can drive and remove screws.
  • Drill: With a drill chuck adapter and drill bits, it can perform drilling tasks.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your impact wrench.

  • Cleaning: Keep the tool's ventilation openings clean and free of debris to prevent overheating. Use a soft, damp cloth to clean the housing. Do not use harsh chemicals or abrasive cleaners.
  • Battery Care: Store batteries in a cool, dry place away from direct sunlight. Do not store fully discharged batteries for extended periods. Charge them periodically if not in use.
  • Lubrication: This tool features a brushless motor and sealed components, generally requiring no internal lubrication.
  • Inspection: Periodically inspect the power cord of the charger for damage. Check sockets and the anvil for wear. Replace worn or damaged parts immediately.
  • Storage: When not in use, store the impact wrench, batteries, charger, and accessories in the provided storage case in a dry, secure location out of reach of children.

8. Troubleshooting

Problem Possible Cause Solution
Tool does not start Battery not charged or improperly installed; Forward/Reverse switch in lock position. Charge battery and ensure it's securely installed; Move switch out of center lock position.
Reduced power/torque Low battery charge; Incorrect speed setting; Worn or damaged socket. Recharge battery; Select a higher speed setting; Replace socket if worn.
Tool overheats Continuous heavy use; Blocked ventilation slots. Allow tool to cool down; Clear any obstructions from ventilation slots.
Battery not charging Charger not plugged in; Faulty battery or charger. Ensure charger is properly connected; Test with another battery/charger if available; Contact support.

9. User Tips

  • For maximum battery life, avoid completely draining the battery before recharging.
  • Always use impact-rated sockets with your impact wrench to prevent damage to standard sockets.
  • When loosening very tight or rusted bolts, apply short bursts of power rather than continuous pressure to help break them free.
  • Keep the battery contacts clean to ensure a good connection with the tool and charger.

10. Warranty and Support

Avhrit products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or contact Avhrit customer service directly. Please have your model number (AT1000) and purchase information ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.