1. Introduction
This manual provides detailed instructions for the safe and efficient use of your Baofeng E88 PMR446 Walkie Talkie. Please read this manual thoroughly before operating the device.
Notice: This walkie-talkie is the PMR version, only suitable for European countries.
What is PMR446?
PMR446 refers to a range of frequencies designated for radio communications that do not require a license for equipment use. Within the European Union, the PMR446 frequency range can be utilized by anyone without the need for a specific license. This means that any equipment designed to operate on the 16 PMR frequencies (channels) can be used freely without contacting local licensing authorities.
Applicable Countries
The Baofeng E88 PMR446 Walkie Talkie is designed for use in European countries, including but not limited to: Spain, France, Italy, Poland, Russia, Netherlands, Ukraine, Belarus, England, Germany, and other European countries.

2. Package Contents
Please check the package contents upon unboxing. The items included depend on whether you purchased a 2-piece or 4-piece set.
For 2-Piece Set:
- 2 x Radio Units
- 2 x Li-ion Batteries
- 2 x Belt Clips
- 2 x Slings (Lanyards)
- 2 x Chargers
- 1 x User Manual
For 4-Piece Set:
- 4 x Radio Units
- 4 x Li-ion Batteries
- 4 x Belt Clips
- 4 x Slings (Lanyards)
- 4 x Chargers
- 2 x User Manuals

3. Product Overview
Familiarize yourself with the components of your Baofeng E88 Walkie Talkie.

- Antenna: For transmitting and receiving radio signals.
- Flashlight (Light): Provides illumination.
- Power/Volume Button: Turns the radio on/off and adjusts volume.
- Transmission Indicator: Lights up during transmission.
- External Speaker/Mic Jack: Port for external audio accessories.
- Screen: Displays channel, battery status, and other information.
- Scan Code Button: Initiates channel scanning.
- Emergency Button: For emergency alerts (functionality may vary).
- Built-in Microphone and Speakerphone: For voice communication.
- Select/Send Channel Button: Used for channel selection and confirmation.
- Menu Button: Accesses radio settings and functions.
- PTT Button (Push-to-Talk): Press and hold to transmit, release to receive.
- Flashlight Button: Activates the flashlight.
- Scan Code Button: Activates the scan function.
- Battery: Rechargeable Li-ion battery pack.
4. Setup
4.1 Battery Installation and Charging
The radio uses a 3.7V Li-ion rechargeable battery pack. Ensure the battery is properly installed before use.
- Align the battery pack with the battery compartment on the back of the radio.
- Gently push the battery into place until it clicks securely.
- To charge, connect the AC/DC wall adapter to a mains power socket.
- Insert the jack of the wall adapter into the desktop charger plug.
- Place the radio into the desktop charger. The charging indicator will show the charging status.
- A full recharge typically takes 4-5 hours. For optimal battery life, it is recommended to charge the battery pack when the radio is off and fully discharged.
5. Operation
5.1 Power On/Off and Volume Adjustment
- To Power On: Rotate the Power/Volume knob (03) clockwise.
- To Adjust Volume: Continue rotating the Power/Volume knob clockwise to increase volume, or counter-clockwise to decrease volume.
- To Power Off: Rotate the Power/Volume knob counter-clockwise until you hear a mechanical "click".
5.2 Choosing a Channel
Your radio features 16 PMR channels and 155 Sub-Codes (50 CTCSS Codes & 105 DCS codes). To communicate with another user, both radios must be set to the same channel and Privacy code.
- If the "+" or "MON" button appears locked, press and hold the "MENU" button (11) for 2 seconds to unlock it.
- Press the "+" or "MON" buttons (10) to cycle through and select one of the 16 PMR channels.
5.3 Monitor Mode Feature
Monitor mode allows you to listen for weak signals on the current channel.
- To Turn ON Monitor Mode: Press and hold the "MON" button (10) for 2 seconds until two beeps sound. The receiver circuit will open, allowing you to hear both noise and weak signals. The RX icon on the screen will blink.
- To Turn OFF Monitor Mode: Press and hold the "MON" button (10) for 2 seconds again. Two beeps will sound, and the RX icon will stop blinking and disappear, returning the radio to "Normal" mode.
5.4 Flashlight Function
The built-in flashlight can be used for illumination in dark environments or emergencies.
- To activate the flashlight, press the Flashlight Button (13).
- Press the button again to turn off the flashlight.
5.5 Push-to-Talk (PTT)
To transmit your voice, press and hold the PTT Button (12) located on the side of the radio. Speak clearly into the microphone (09). Release the PTT button to return to receive mode.
6. Maintenance
6.1 General Care
- Keep the radio dry. If it gets wet, wipe it dry immediately.
- Clean the radio with a soft, damp cloth. Do not use harsh chemicals or cleaning solvents.
- Avoid exposing the radio to extreme temperatures or direct sunlight for prolonged periods.
6.2 Battery Care
- Charge the battery fully before first use.
- Avoid completely draining the battery frequently, as this can reduce its lifespan.
- If the radio will not be used for an extended period, remove the battery and store it in a cool, dry place.
7. Troubleshooting
If you encounter issues with your Baofeng E88 Walkie Talkie, refer to the following common problems and solutions.
7.1 Common Issues
- Buttons are unresponsive or locked: If the "+" or "MON" button is locked, press and hold the "MENU" button for 2 seconds to unlock it.
- No power: Ensure the battery is fully charged and correctly installed. Check if the Power/Volume knob is turned clockwise to the 'on' position.
- Cannot communicate with other radios: Verify that both radios are set to the same channel and privacy code (CTCSS/DCS). Ensure you are within range.
- Poor audio quality or static: Check for obstructions between radios. Move to a more open area. Ensure the volume is adjusted correctly.
7.2 Range Limitations
The communication range of your walkie-talkie can vary significantly based on environmental and topographical conditions. The maximum range of up to 10 km is typically achieved in open, unobstructed spaces.
- Open Space (no obstructions, line of sight, e.g., mountains): Up to 10 km.
- Open Space (with obstructions like trees, leaves, houses): Approximately 4-6 km.
- City (with buildings or other significant obstructions): Approximately 1-2 km.
- Inside a car or metallic construction: Range can be significantly reduced.
8. Specifications
Detailed technical parameters of the Baofeng E88 Walkie Talkie.
8.1 General Specifications
| Feature | Specification |
|---|---|
| Frequency Range | 446.00625-446.19375MHz (PMR446) |
| Channels | 16 PMR446 Channels |
| Working Temperature | -10℃ to +50℃ |
| Operation Voltage | DC 3.7V±10% |
| Operation Mode | Simplex |
| Dimensions (without Antenna) | 168mm x 57mm x 34.5mm (6.61 x 2.24 x 1.36 inches) |
| Weight (Battery pack included) | Approximately 150g |
| Antenna Impedance | 50ohm |
| Battery Capacity | 1200mAh Li-ion |
| Battery Life | Up to 18 hours (under typical use conditions) |
| Sub-codes | 155 (50 CTCSS Codes & 105 DCS codes) |
| Output Power | ≤0.5W |
8.2 Transmitter Part
| Feature | Specification |
|---|---|
| Frequency Stability | ±2.5ppm |
| RF Output Power | ≤500mWERP |
| Max Frequency Deviation | ≤2.5KHz |
| Audio Distortion | ≤3% |
| Adjacent Channel Power | 60dB |
8.3 Receiver Part
| Feature | Specification |
|---|---|
| Audio Distortion | ≤3% |
| Audio Response | 300 HZ-3KHZ |
8.4 PMR446 Frequency List

| Frequency (MHz) | Channel |
|---|---|
| 446.00625 | 1 |
| 446.01875 | 2 |
| 446.03125 | 3 |
| 446.04375 | 4 |
| 446.05625 | 5 |
| 446.06875 | 6 |
| 446.08125 | 7 |
| 446.09375 | 8 |
| 446.10625 | 9 |
| 446.11875 | 10 |
| 446.13125 | 11 |
| 446.14375 | 12 |
| 446.15625 | 13 |
| 446.16875 | 14 |
| 446.18125 | 15 |
| 446.19375 | 16 |
8.5 Dimensions

- Height: 17.8 cm / 7.01 inches
- Width: 5 cm / 1.97 inches
- Depth: 3.1 cm / 1.22 inches
9. User Tips
Here are some general tips to enhance your experience with the Baofeng E88 Walkie Talkie:
- Clear Communication: Always ensure your channel and privacy codes match those of the person you are trying to communicate with.
- Battery Optimization: To maximize battery life, turn off the radio when not in use and fully charge the battery before each extended period of operation.
- Range Awareness: Be mindful of your surroundings. Obstructions like buildings and dense foliage can significantly reduce your communication range. For best results, use in open areas.
- Headset Use: Utilize the 2-pin Kenwood headset jack for hands-free operation, especially in noisy environments or when privacy is desired.
10. Warranty and Support
For any warranty claims, technical support, or service inquiries, please contact the seller or the manufacturer directly. Keep your purchase receipt as proof of purchase.