1. Introduction
Thank you for purchasing the Homcom Set of 2 Modern Dining Chairs. These chairs are designed to provide comfort and style to your dining room, kitchen, living room, or bedroom. Featuring synthetic velvet upholstery, a curved backrest, and sturdy steel legs, they offer both elegance and durability. This manual provides important information regarding assembly, usage, maintenance, and specifications to ensure safe and optimal use of your new chairs.

Image 1.1: Homcom Set of 2 Modern Dining Chairs (Blue)
2. Safety Information
- Read all instructions carefully before assembly and use.
- Keep all packaging materials away from children to prevent choking hazards.
- Do not stand on the chairs.
- Do not exceed the maximum weight capacity of 120 kg (264 lbs) per chair.
- Ensure all screws and bolts are securely tightened before use and check periodically.
- Use the chairs on a flat, stable surface to prevent tipping.
- Avoid exposing the chairs to direct sunlight or extreme temperatures to prevent material degradation.
3. Package Contents
Please check that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
| Item | Description | Quantity (per chair) |
|---|---|---|
| A | Backrest | 1 |
| B | Seat | 1 |
| C | Front Leg | 2 |
| D | Rear Leg | 2 |
| E | Screw M6*25 | 8 |
| F | Washer | 8 |
| G | Spring Washer | 8 |
| H | Allen Key | 1 |
4. Assembly Instructions
Follow these steps for quick and easy assembly. It is recommended to assemble the chairs on a soft, clean surface to prevent scratches.

Image 4.1: Assembly Diagram and Parts Overview
- Attach Front Legs: Take the seat (B) and attach the two front legs (C) to the designated points on the underside of the seat. Secure each leg using two M6*25 screws (E), two washers (F), and two spring washers (G). Do not fully tighten yet.
- Attach Rear Legs: Similarly, attach the two rear legs (D) to the remaining designated points on the underside of the seat (B). Secure each leg using two M6*25 screws (E), two washers (F), and two spring washers (G). Do not fully tighten yet.
- Attach Backrest: Align the backrest (A) with the back of the seat (B). Secure it using the remaining M6*25 screws (E), washers (F), and spring washers (G).
- Final Tightening: Once all parts are loosely assembled, place the chair upright on a flat surface. Apply gentle pressure to ensure it sits evenly, then fully tighten all screws using the provided Allen key (H). Do not overtighten.
5. Usage
These chairs are designed for indoor use in dining areas, kitchens, living rooms, or bedrooms. They are suitable for seating one person at a time. The armless design allows for easy storage under most standard tables, optimizing space.

Image 5.1: Chairs in a dining setting
6. Maintenance and Care
- Cleaning Upholstery: For general cleaning, gently vacuum the synthetic velvet fabric to remove dust and debris. For spills, blot immediately with a clean, dry cloth. For tougher stains, use a mild fabric cleaner specifically designed for synthetic upholstery, testing on an inconspicuous area first.
- Cleaning Steel Legs: Wipe the powder-coated steel legs with a damp cloth and mild detergent if necessary. Dry immediately to prevent rust.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals on any part of the chair, as this may damage the finish or fabric.
- Regular Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten as needed to maintain stability and safety.
- Environmental Conditions: Keep the chairs away from direct sunlight, heat sources, and excessive moisture to prevent fading, warping, or damage to materials.
7. Troubleshooting
- Chair feels wobbly after assembly:
- Ensure all screws are fully tightened. Sometimes, tightening screws while the chair is not on a flat surface can cause wobbling. Loosen all screws slightly, place the chair on a flat surface, apply gentle downward pressure, and then retighten all screws evenly.
- Difficulty aligning screw holes:
- Do not fully tighten any screws until all parts are loosely assembled. This allows for minor adjustments to align holes properly. If still difficult, check if the correct legs are being attached to the correct positions (front vs. rear).
- Scratches on floor:
- Ensure the non-slip foot pads are correctly installed and intact. If they are worn or missing, replacements may be needed to protect your flooring.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | HOMCOM |
| Model Reference | 83a-210v00bu |
| Color | Blue (Upholstery), Black (Legs) |
| Material | Synthetic velvet (100% polyester), Foam, Steel |
| Overall Dimensions (L x W x H) | 45 cm x 57 cm x 86 cm (17.7" x 22.4" x 33.9") |
| Seat Dimensions (L x W x H) | 45 cm x 41 cm x 48 cm (17.7" x 16.1" x 18.9") |
| Seat Thickness | 5 cm (2") |
| Backrest Dimensions (W x H) | 45 cm x 40 cm (17.7" x 15.7") |
| Leg Height | 45 cm (17.7") |
| Maximum Load Capacity | 120 kg (264 lbs) |
| Installation Method | Assembly Required |
9. User Tips
- For optimal stability and longevity, periodically check and retighten all assembly screws, especially after the first few weeks of use.
- When moving the chairs, lift them rather than dragging to prevent damage to the legs and floor.
- Consider using felt pads under the chair legs for extra floor protection, especially on delicate surfaces.
10. Warranty and Support
For any questions, missing parts, or issues regarding your Homcom Set of 2 Modern Dining Chairs, please contact the seller or manufacturer's customer support. Please have your purchase details and model reference (83a-210v00bu) ready when contacting support.
Refer to your purchase documentation for specific warranty terms and conditions.