BEAMFLY H7/H11 LED Headlight Bulb

Contents

BEAMFLY H7/H11 LED Headlight Bulb User Manual

Model: H7/H11 LED Headlight Bulb

Brand: BEAMFLY

1. Introduction

Thank you for choosing BEAMFLY LED Headlight Bulbs. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new LED headlight bulbs. Please read this manual thoroughly before installation and keep it for future reference.

These high-performance LED bulbs are designed to provide brighter and whiter light for improved night-time driving visibility, featuring a 6000K color temperature and 18000LM output.

2. Important Safety Warnings

  • Do NOT touch the LED chipsets directly.
  • Do NOT dismantle the LED bulb.
  • The operating voltage must NOT exceed 24V. These bulbs are not compatible with 24V truck systems, as voltage can exceed 60V during engine start or uphill driving.
  • These LED headlight bulbs are NOT compatible with CAN-BUS systems without a separate CAN-BUS canceller. Installation without a canceller on a CAN-BUS vehicle may result in flickering or error codes on the dashboard.
  • Some vehicles may require a decoder after LED installation to prevent issues like flickering, one bulb being off, or malfunction lights on the instrument panel.
  • Adding LED bulbs is a modification and may not be applicable to all car models. Some installations might require removing the front bumper, which may incur additional costs. Always test the LED bulbs before completing the full installation to avoid unnecessary expenses.
  • LED bulbs have a temperature adjustment function. As the bulb's temperature increases, the power output may slightly decrease. This is normal and helps extend the lamp's lifespan. The stated power (100W) is laboratory data and may not represent power during long-term operation.
  • Consult local transportation authorities regarding regulations on automotive LED lighting, as usage may be restricted in certain regions or countries.

3. Package Contents

  • 2 x BEAMFLY LED Headlight Bulbs
  • 1 x English User Manual
BEAMFLY LED Headlight Bulbs and packaging
Figure 1: Package contents including two LED bulbs and the product box.

4. Specifications

Feature Specification
Type LED Headlight Bulb
Socket Type H7, H11 (also compatible with H1, 9005, 9006)
Light Color 6000K Cold White
Lumens 18000LM
Material Aeronautical Aluminum
Voltage DC 9-18V
Wattage 100W (High Power)
Chip 3570 LED CSP Large Chips Bead
Design CNC-integrated machining, Mini Size 1:1 Original bulb
Heat Dissipation High-speed fan (12000RPM Turbo Fan), All-aluminum structure (6063 aluminum rod), Double copper tube, Double intelligent temperature control
Exterior LED Driver Reliable driver ensures lifespan up to 100,000 hours
Applicable Ambient Temperature -40℃ ~ +80℃
Theoretical Life Over 80,000 hours
Certification CE
Car Brand Compatibility Fit for VW, TOYOTA, HONDA, BMW, AUDI, FORD, Hyundai and so on
Car Model Compatibility 90% of the models on the market
Monster Level Performance features diagram
Figure 2: Key performance features of BEAMFLY LED Headlight Bulbs.
Dynamic Cooling System diagram
Figure 3: Components of the dynamic cooling system.

5. Installation

Installation typically takes about 10 minutes. Follow these steps for a smooth installation:

  1. Remove the Original Bulb: Carefully remove the existing headlight bulb from its housing.
  2. Insert the LED Bulb: Insert the BEAMFLY LED bulb into the headlight housing. Ensure the LED chipsets are facing the correct direction for optimal beam pattern. For H4 and H1/H7/H11/9005/9006 sockets, refer to Figure 4 for correct orientation.
  3. Secure the Bulb: Secure the LED bulb in place, often by twisting or using a retaining clip, similar to the original bulb.
  4. Connect Wiring: Connect the LED bulb's wiring to your vehicle's power plug.
10-Min Installation steps
Figure 4: 3-step installation guide for LED bulbs.
Correct LED chipset direction for H4 and H1/H7/H11/9005/9006
Figure 5: Correct direction of LED chipsets for H4 and H1/H7/H11/9005/9006 socket types.

5.1 Adjusting Beam Pattern

The BEAMFLY LED bulbs feature a 360° rotational adapter, allowing you to adjust the beam pattern for an intensely focused lighting effect. Rotate the bulb gently within its housing until the desired beam pattern is achieved. Refer to Figure 6 for visual guidance.

Rotational Adapter for beam pattern adjustment
Figure 6: Adjusting the beam pattern using the 360° rotational adapter.

5.2 Special Considerations

  • If the LED bulbs do not fit with the standard adapter, you may need to purchase additional holder rings (adapters) separately.
  • If you cannot reinstall the original dustproof cap after installing the LED bulbs, consider purchasing a universal rubber dustproof cap.

6. Operating Instructions

Once installed, operate your LED headlights as you would your vehicle's original headlights. Turn on your vehicle's lights using the standard controls.

  • For H4 LED bulbs, the low beam and high beam functions operate independently and do not work simultaneously.

7. Maintenance

  • Keep the headlight lenses clean to ensure maximum light output.
  • Periodically check the wiring connections to ensure they are secure.
  • Avoid touching the LED chipsets directly during any maintenance or inspection.
  • Do not use harsh chemicals or abrasive materials to clean the bulbs or housing.

8. Troubleshooting

Q: Can I fit these LED bulbs to a 24V truck?
A: No. The operating voltage should not exceed 24V. Truck voltage can reach over 60V during engine start or uphill driving, which can damage the bulbs.
Q: Why is the light flickering or showing an error code on the dashboard?
A: This usually indicates a CAN-BUS incompatibility. You will need to purchase and install separate CAN-BUS cancellers to resolve this issue.
Q: My H1 LED bulbs have 2 wires, but my car's power plug has only 1 wire. How do I connect them?
A: You may need to purchase a conversion wire. Additionally, you might need to disconnect the other power plug from the metal part of the headlight housing. Refer to Figure 7 for wiring guidance.
H1 LED bulb wiring diagram for 1-wire car plug
Figure 7: Example wiring for H1 LED bulbs with a 1-wire car power plug.
Steps for connecting H1 LED bulbs
Figure 8: Steps for connecting H1 LED bulbs: 1. Pull out plug, 2. Confirm polarity, 3. Connect wires.
Q: There is radio interference after installing the LED bulbs. How can I solve this?
A: Radio interference can be difficult to resolve. Please contact the seller for potential solutions.
Q: How do I know if my car has a complex CAN-BUS system?
A: Disconnect the power plug of one of your original headlight bulbs. Start the engine and turn on the headlights. If an error for a 'fused bulb' appears on the instrument panel, your car likely has a CAN-BUS system that will also show an error with LED bulbs.
Q: One of the LED bulbs stopped working after several months. What should I do?
A: First, check the connection. Then, swap the LED bulbs to see if the malfunctioning bulb works on the other side. If it still doesn't work, contact the seller for assistance.
Q: The high beam doesn't work, but the low beam works normally. What should I do?
A: If you encounter this issue, please contact the seller for a solution.

9. User Tips

  • Always verify your vehicle's CAN-BUS system compatibility before purchasing or installing LED bulbs to avoid flickering or error codes.
  • Take advantage of the 360° rotational adapter to fine-tune your beam pattern for optimal visibility and to prevent glare for oncoming traffic.
  • If you experience any radio interference, contact the seller for specialized advice, as this can be a complex issue.

10. Warranty and Support

BEAMFLY offers a 3-year replacement warranty and a 45-day money-back guarantee for these LED headlight bulbs.

If you encounter any issues or need to claim warranty, please contact the seller directly via email or through the platform where you purchased the product (e.g., Amazon, Facebook/Instagram). They will assist you in resolving the problems.

For additional information and documents, you may refer to the User Manual (PDF).

© 2024 BEAMFLY. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.