1. Introduction
Thank you for choosing the Xiaomi Mijia Cordless Vacuum Cleaner 3 Base Station Edition. This innovative cleaning system combines powerful suction with intelligent features and a convenient 4-in-1 base station for a seamless cleaning experience. This manual provides essential information for the safe and efficient use, maintenance, and troubleshooting of your new vacuum cleaner.
2. Package Contents
Please check the package contents carefully upon unpacking. If any items are missing or damaged, please contact customer support.
- Dust collection base station x1 (with dust bag, filter sponge, and bracket installed)
- Host x1 (with dust cup, filter cone, filter cotton, and filter element installed)
- Electric soft velvet floor brush x1
- Electric mite removal brush x1
- Two-in-one brush x1
- Extension rod x1
- Dust collection base station base x1
- Dust bag x1
- Instruction manual x1

3. Product Overview
The Xiaomi Mijia Cordless Vacuum Cleaner 3 Base Station Edition features a powerful 260AW motor, a 4-in-1 smart base station for automatic dust collection, charging, and storage, and advanced filtration for a thorough clean. It integrates with Xiaomi HyperOS Connect for smart reminders and remote control via the Mijia APP.


4. Setup and Assembly
Follow these steps to set up your vacuum cleaner and base station:
- Unpack Components: Carefully remove all items from the packaging and verify against the package contents list.
- Assemble the Host: Ensure the dust cup, filter cone, filter cotton, and filter element are correctly installed in the host.
- Attach Extension Rod and Brush: Connect the extension rod to the host, then attach your desired cleaning brush (e.g., electric soft velvet floor brush, electric mite removal brush, or two-in-one brush) to the end of the extension rod.
- Set up the Dust Collection Base Station: Place the dust collection base station base in a suitable location near a power outlet. Ensure the dust bag, filter sponge, and bracket are installed in the dust collection base station.
- Dock the Vacuum Cleaner: Place the assembled vacuum cleaner host onto the dust collection base station. It will automatically begin charging. Ensure the host is placed vertically to prevent the dust cup cover from opening automatically.
- Power Connection: Connect the base station to a 220V~ 50Hz power supply.
- App Connection (Optional): Download the Mijia APP and connect your vacuum cleaner for smart features like dust full reminders and remote dust collection.
5. Operation
5.1 Powering On/Off
- Press the one-touch start switch on the host to power on or off the vacuum cleaner.

5.2 Cleaning Modes and Suction Power
- The vacuum cleaner features an intelligent dirt recognition sensor. In intelligent gear mode, it automatically senses the amount of dust and adjusts suction power (up to 260AW) for efficient and energy-saving cleaning.
- Different operating modes (3-4 modes available) can be selected for various cleaning needs.

5.3 Enhanced Visibility
- The 140° wide-angle green light searchlight on the floor brush magnifies tiny dust particles 16 times, making invisible dust visible for precise cleaning.

5.4 Battery and Charging
- The vacuum cleaner is equipped with an 8x2500mAh large-capacity Li-ion battery, providing up to 90 minutes of battery life in energy-saving mode with the two-in-one brush.
- Charging occurs automatically when the host is docked in the base station. A full charge takes approximately 4 hours.

5.5 Smart Connectivity
- Connect the vacuum cleaner to the Mijia APP via Wi-Fi (IEEE 802.11b/g/n 2.4GHz) and Bluetooth 5.0 for enhanced control and monitoring.
- The app provides real-time status updates, dust bag full reminders, consumable replacement reminders, cleaning logs, and remote dust collection functionality.

6. Maintenance
6.1 Dust Collection and Disposal
- The 4-in-1 smart base station automatically collects dust from the vacuum cleaner.
- The 2.5L antibacterial sealed dust bag can be thrown away once every 90 days, reducing the frequency of manual disposal and preventing secondary air pollution.
- The three-stage automatic dust collection system compresses debris efficiently.


6.2 Filter System Maintenance
- The vacuum cleaner features a 12-cone cyclone filter system and a 5-stage fine filtration system, achieving up to 99.97% filtration efficiency and reducing secondary pollution.
- The filter element is removable and washable for repeated use. Ensure it is completely dry before reinstallation to maintain optimal performance and prevent damage.



6.3 Brush Head Maintenance
- The dual brush anti-tangling design helps reduce hair entanglement. Regularly check and clean the floor brush and mite removal brush to remove any accumulated hair or debris.

7. Troubleshooting
This section addresses common issues you might encounter with your vacuum cleaner.
7.1 Dust Cup Cover Opens Automatically
- Issue: The dust cup cover opens automatically when the host is taken out from the base station.
- Solution: When removing the host from the base station, keep it vertical to the ground. If it's taken out at an angle, the dust cup dust collection port cover may open. If this happens, manually close it before use.
7.2 Base Station Does Not Collect Dust Thoroughly
- Issue: Hair occasionally gets entangled in the metal filter or stuck on top of the dust cup, or large particles are not fully collected.
- Solution: Try collecting dust several times. If the issue persists, manually clean any entangled hair or large debris from the metal filter or dust cup.
7.3 Short Battery Life
- Issue: The battery life seems shorter than expected.
- Possible Causes & Solutions:
- Gear Selection: Strong gear significantly reduces battery life (approx. 10 minutes). Use different gears and brush head accessories according to the cleaning task. The smart gear is recommended for daily use.
- Battery Charging: Always return the vacuum to the base station for charging promptly after use to ensure it's fully charged for the next use.
- Machine Overheating: The host may overheat and shut down. Check if the suction port is blocked, if the filter element has excessive dirt, or if it has been in strong mode for too long. Allow the host to cool down before restarting.
7.4 Floor Brush Tilted After Docking
- Issue: The floor brush is slightly tilted after the host is placed in the base station.
- Explanation: This is normal. The electric soft velvet floor brush has a separate motor on one side, which causes that side to tilt downward due to gravity when suspended vertically.
7.5 Mite Removal Brush Cannot Be Docked
- Issue: The host cannot be connected to the mite removal brush and placed directly on the base station.
- Solution: Do not connect the mite removal brush when placing the host on the base station. This configuration can cause the mite removal brush to get stuck and prevent normal removal.
8. Specifications
8.1 Host Parameters
| Parameter | Value |
|---|---|
| Product Name | Cordless vacuum cleaner |
| Product Model | E202 |
| Rated Voltage | 28.8V- |
| Rated Power | 535W |
| Charging Voltage | 34V= |
| Charging Time | About 4 hours |
| Battery Capacity | 2500mAh (nominal), 2300mAh (rated) |
| Product Net Weight | 7.54kg |
| Product Size | 1110 x 263 x 256mm |
| Wireless Connection | Wi-Fi IEEE 802.11b/g/n 2.4GHz, Bluetooth 5.0 |
| Supported System | Android 9.0 or iOS 12.0 and above |
8.2 Dust Collection Base Station Parameters
| Parameter | Value |
|---|---|
| Base Station Model | E202-JZ |
| Rated Input | 220V~ 50Hz |
| Rated Output | 34V--0.8A |
| Rated Power | 635W |
8.3 General Specifications
| Attribute | Value |
|---|---|
| Weight | 6-10 kg |
| Number of Nozzles | 1-3 nozzles |
| Number of Operating Modes | 3-4 |
| Battery Type | Li-ion |
| Liquid Tank Volume | <3L |
| Turbo Brush | Yes |
| Dust Box Capacity (L) | >2 L |
| Filter Type | HEPA |
| LCD | No |
| Cleaning Route | Planned Type |
| Bag Or Bagless | With Bag |
| Cord Length (m) | WireLess |
| Special Suction Nozzle | Acarid-killing Brush |
| Dust Storage Type | Fabric Dust Bag |
| Installation | Vertical/Hand Held |
| Certification | CE |
| Voltage (V) | 28.8 V |
| Power (W) | 500-999W |
| Function | Blow Dry |
| Brand Name | XIAOMI |
| Voltage | 220 V |
| Origin | Mainland China |
| Remote Control | Yes |
| Battery Life | 1 hour and 30 minutes |
9. User Tips
- Proper Docking: Always ensure the vacuum cleaner host is placed vertically into the base station to prevent the dust cup cover from accidentally opening.
- Thorough Dust Collection: If you notice hair or large debris not fully collected by the base station, try initiating the dust collection cycle a few times or manually clear any blockages in the metal filter or dust cup.
- Optimize Battery Life: Utilize the intelligent gear mode for daily cleaning to conserve battery. For heavy-duty tasks, switch to strong gear, but be mindful of the reduced battery duration. Always return the vacuum to the base station for charging immediately after use.
- Prevent Overheating: If the vacuum cleaner overheats and shuts down, check for any obstructions in the suction port or excessive dirt on the filter element. Allow the unit to cool down before resuming operation.
- Accessory Compatibility: Avoid connecting the mite removal brush when docking the vacuum cleaner into the base station, as this can cause the brush to get stuck.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Xiaomi website or contact your local authorized service center. Keep your purchase receipt as proof of purchase for warranty claims.