Introduction
Dear Customer,
We are truly grateful that you chose our product. We hope that you will be happy enjoying the fantastic quality and our services. Your suggestions and expectations are most helpful for our product's improvement and creation to fit your standards.
This user's manual will guide you to understand how to operate this product and solve any problems you may encounter. Please read carefully before using the device.
Safety Warnings
DANGER - Keep the adapter cable away from the baby to avoid a choking hazard from entangling the baby's neck.
Keep the baby camera unit and cable out of the reach of children, more than 3 feet or 1 meter away.
Do not place the camera or power supply in a child's cot/crib.
Camera Settings and Usage Safety
- Fix the camera in a place where children/babies can be observed well.
- Place the camera on a flat surface such as a table, desk, or shelf.
- This baby monitor meets all standards related to electromagnetic fields and safe-use when operating in accordance with the instructions of this user guide. Therefore, please read this user guide carefully before using the device.
- Must be assembled by an adult.
- This baby monitor can be used for adult guardianship.
- Store this user guide for future reference.
- Do not cover the baby monitor with a towel or blanket.
- Keep the baby monitor away from water.
- Keep the baby monitor away from heaters, humidifiers, and other appliances.
- Do not use other chargers or power adapters which may damage the device.
- Do not touch the plug with a sharp or metal object.
Important Notes for Installing a Baby Monitor
- When using, ensure wireless transmission is smoothly connected between the camera and the monitor. The wireless transmission distance is affected by environmental conditions.
- Any heavy metal or home appliance (such as refrigerators, metal doors, or reinforced concrete) will block wireless signal transmission.
- The strength of the signal may be attenuated by solid buildings (such as walls), radios, or electrical equipment (such as televisions, computers).
- If the signal is lost, try to move the device to a different location indoors.
- Do not put the monitor and camera together within 1.5 meters, otherwise, it will cause howling.
Package Contents
The unit package includes the following items:
- Camera
- Monitor
- User Manual (this document)
- Power Adapter + Power-charging cable (Longer charging cable for camera)
- Bag of screws
Please use a DC 5V adapter, preferably the original one.

Figure: Baby Monitor Kit Contents

Figure: Detailed View of Package Contents
Product Overview
Video: Product Overview and Features Demonstration
Monitor and Camera Diagram

Figure: Baby Monitor Display Unit and Camera Unit
Display Unit Overview

Figure: Monitor Front View
Components:
- Reset Key: Small button for resetting the device.
- Power Switch: On/Off button.
- Music/Night Light Key: Controls lullabies and night light.
- PTZ/Back: Pan/Tilt/Zoom control and back button.
- Mic: Microphone for two-way audio.
- Menu/OK: Accesses menu and confirms selections.
- Volume Indicator: Shows current volume level.
- Charging Indicator: Lights up when charging.
- Direction Key/Shortcut Key: Navigation and quick access to functions.
- Power On/Off Indicator: Shows device power status.
- Audio Key: For intercom function.
- Power Port: For charging and power supply.
- Antenna: For wireless signal transmission.
- Speaker: For audio output.
- Bracket: For propping up the monitor.
Camera Unit Overview

Figure: Camera Front View
Components:
- MIC: Microphone for audio input.
- IR Sensor: Detects ambient light for night vision.
- Lens: Captures video feed.
- Infrared Light: Provides illumination for night vision.
- Built-in antenna: For wireless signal transmission.
- Temperature Sensor: Monitors room temperature.
- Night light: Provides soft illumination.
- TF card slot: For local storage (Micro SD Card).
- Speaker: For two-way audio output.
- Power port: For power supply.
- Pairing Button: For initiating pairing with the monitor.
Display Status Bar Icons
| Icon | Description |
|---|---|
| 📶 | SIGNAL LEVEL (5 Levels) |
| ❌ | NO SIGNAL |
| 📷1 Wi-Fi | CAMERA 1 WIFI SIGNAL |
| 📷2 Wi-Fi | CAMERA 2 WIFI SIGNAL |
| 📷1 | CAMERA 1 |
| 📷2 | CAMERA 2 (customized) |
| 🔍 | CAMERA IMAGE ZOOM IN 2 TIMES |
| 🔄 | CAMERA SWITCH |
| 🎶 | LULLABY TURN ON /OFF |
| 🔊 | VOLUME SETTING (6 levels can be set) |
| 🗣️ | INTERCOM MODE |
| 🌙 | NIGHT VISION MODE |
| 💾 | TF CARD RECOGNIZED |
| VOX-H | CRYING DETECTION (HIGH, MED, LOW) |
| 24°C | BABY ROOM TEMPERATURE DISPLAY |
| 05:51 | SYSTEM TIME |
| 🔋 | BATTERY POWER |
Display Menu Icons
| Icon | Description |
|---|---|
| 🍼 | Feeding Reminder Time Setting (Can Set 5 Alarms) |
| 🎶 | Lullaby Settings (8 Lullabies) |
| 🌡️ | Temperature Setting (°C/°F, Temperature alarm on/off/High/Low temperature warning setting) |
| 🔊 | VOX Sound Detection Setting |
| 🔍 | Camera zoom in / out |
| ➕ | Add camera |
| 🗑️ | Delete camera |
| 🔄 | Switch camera |
| 🌐 | Wifi config |
| ⏰ | Time |
| 🔈 | Volume |
| 🔆 | Brightness |
| 🗣️ | Language |
| 💡 | Automatic brightness |
| 📶 | WiFi switch |
| ➡️ | Auto tracking switch |
| ⚡ | Light source frequency |
| 🌈 | Set the brightness level of the night light |
| 💾 | TF card format |
| 📱 | APP download (APP Store/Google play) |
Setup
2.1 How to Turn On Device
The baby monitor comes with two power adapters and two USB charging cables. One is for the camera, and the other is for charging the monitor battery.
- Camera: Connect the camera to a 110-240V AC outlet or USB port. The camera will turn on automatically, and the red indicator light at the bottom of the camera will illuminate. Unplug the camera to turn it off.
- Monitor: Pull out the antenna first. Press and hold the Power Switch of the monitor for 3 seconds to turn it on or off. Please charge the monitor when you use it for the first time.
2.2 Pairing
The monitor and camera are pre-paired. Once turned on, they should connect automatically. If not, follow these steps:
- Turn on the monitor and press the Menu button (M/OK).
- Use the Direction keys (◀ or ▶) to select the camera icon (📷).
- In the pop-up bar, press the Up arrow (▲) button to select the pairing icon (🔗) and press M/OK to confirm.
- Then press the Up arrow (▲) or Down arrow (▼) to choose the desired camera (📷1 or 📷2) to pair.
- A prompt will appear on the monitor screen. Press and hold the pairing key on the camera for 3 seconds.
- When successfully paired, you will see the image from the camera on the monitor, and the camera symbol will become 📷1 or 📷2.
The camera can be paired to a maximum of 2 monitors. To add a second camera, follow the steps above.
If the camera status shows 📷1 or 📷2 but no image appears on the monitor, select the trash can icon (🗑️) and choose 📷1 or 📷2, then select M/OK to delete the current camera and re-pair it.
Note: If pairing fails several times in a row, please contact after-sales service or your local dealer.
2.3 Checking the Image of Baby Camera
When both the camera and the monitor are turned on, the monitor should display the image from the camera. If not, check the pairing condition.
- Please make sure the camera is powered on.
- If the connection fails, please re-pair according to the 2.2 Pairing instructions.
- Press the M/OK key to enter the menu.
- Use the Direction keys (◀ or ▶) to select the camera icon (📷) in the pop-up bar.
- Press the M/OK key to select the camera you want to watch.
If no device is paired within 1 minute, the monitor will automatically exit the pairing mode.
2.4 How to Connect the Camera to the App
The baby monitor supports dual control via the monitor and a mobile application. This allows you to view your baby from anywhere.

Figure: App & Monitor Dual Control
- Download and Setup the App “BBM Camera”:
Download “BBM Camera” from the App Store or Google Play on your smartphone, or scan the QR code below. Register and log in to the “BBM Camera” APP.
Figure: App Download QR Code
Note: Using the APP requires authorization for location, microphone, and camera. When the authorization prompt pops up during usage, please select "Agree".
- WiFi Settings on Smartphone:
Please ensure your smartphone is connected to a 2.4GHz WiFi network when configuring the camera, as the camera only supports 2.4GHz WiFi. You can reconnect your smartphone to a 5GHz WiFi network once the App configuration is completed.
Figure: App Setup Steps
- Login to the App to Add Baby's Information:
Follow the in-app instructions to add your baby's information and complete the setup. - Pairing Network from the Monitor:
You can also initiate the network pairing process from the monitor itself.
Figure: QR Code Scanning for App Pairing
Turn on the monitor and press the Menu key (M/OK) to enter the main menu. Press the Direction keys (◀ or ▶) to select the camera icon (📷). In the pop-up bar, press the Up arrow (▲) button to select the pairing icon (🔗) and press M/OK to confirm. Then press the Up arrow (▲) or Down arrow (▼) to choose 📷1 or 📷2 to select the current camera to enter pairing mode. You will see a prompt on the monitor: "Enter distribution network mode". You will hear a voice prompt "Enter distribution network mode" from the camera. Place the QR code generated by the app against the camera to scan it (ensure a distance of 5 to 20cm).
When you hear "Received distribution network information", the app will show a connecting device screen. When you hear "Network Connection Successful" and the following interface appears, click "Save". The network pairing is successful.
- Troubleshooting App Connection:
If connection fails, double-check the WiFi account and password information, then try again.
Operating Instructions
4. Buttons of the Monitor
- 4.1 Intercom Mode: While you need to talk to your baby, press and hold the Intercom button (🗣️) to talk. Release the button when the conversation is over.
- 4.2 Lullaby & Night Light Switch:
(1) Press the Music key (🎶) to play a lullaby. Press it again to turn off the lullaby.
(2) Press and hold the Night Light button (💡) to turn on/off the night light. - 4.3 Camera Rotation:
(1) Press the Camera Rotation button (🔄) briefly to activate the camera remote control mode. When you see the arrows on the screen, press the Direction buttons (⬆️⬇️⬅️➡️) to adjust the camera's rotation angle.
(2) When you are using the menu, press the Camera Rotation button (🔄) to go back.
4.4 Volume Adjustment
Press the Left (◀) or Right (▶) arrow keys to adjust the volume. The monitor has 6 volume levels.
4.5 Display Brightness
Press the Up (▲) or Down (▼) arrow keys to adjust the brightness. The monitor has 6 brightness levels.
5. The Display Menu
To access the display menu, press the M/OK button.
- 5.1 Feeding Reminder (Alarm):
From the menu, choose the Feeding Reminder icon (🍼). Select the alarm time (0.5h/1h/2h/3h/4h) and press M/OK to confirm. Press M/OK again to exit the menu.
If an alarm time is set, the monitor will beep at the selected interval, and a flashing feeding mark will appear on the screen. Press any key to cancel the reminder. - 5.2 Lullaby:
From the main menu, select the Lullaby icon (🎶). Press M/OK. In the pop-up menu bar, press Up (▲) or Down (▼) to select the desired lullaby (🎶1~🎶8). Press M/OK to confirm. When a lullaby is playing, its icon will be highlighted. When it stops, the icon will revert.
Options include: Lullaby setting, Single cycle, Loop. Use Left (◀) or Right (▶) to adjust volume. - 5.3 Temperature Display:
(1) Press M/OK to enter the main menu, select the Temperature icon (🌡️). Press Up (▲) or Down (▼) to select °C or °F. Press M/OK to confirm.
(2) Select the Temperature icon (🌡️) and press M/OK to enter the sub-menu for setting the alarming temperature.

Figure: Temperature and Humidity Monitoring
Set the temperature alarm mode: In alarm mode, the temperature value on the status bar will change color when the temperature is not within the threshold. If the temperature is not within the threshold, the status bar value will change color, an icon (⬆️ or ⬇️) will appear, and a beep alarm will sound.
Set the upper limit of the temperature alarm threshold: Press Left (◀) and Right (▶) to set the temperature value to be warned (°C setting range 28°C ~37°C, °F setting range 82°F ~98°F). If the current ambient temperature is higher than the set warning temperature, the system will trigger a temperature warning.
Set the lower limit of the temperature alarm threshold: Do the same to set the low warning temperature (°C setting range 0°C~28°C, °F setting range 32°F~82°F). If the current ambient temperature is lower than the warning temperature, the system will trigger a temperature warning.
Press any key to cancel the beep sound. If the temperature has not returned to the threshold range, the beep alarm sound will still be emitted 30 seconds later.
- 5.4 VOX Setting:
5.4.1 VOX mode off: Press M/OK to enter the main menu, select VOX, and choose OFF to turn off VOX mode. When VOX is off, the display screen will shut down, but the sound from the camera can still be heard. This mode is useful when the baby is playing, but you need to leave the room.
5.4.2 VOX mode on: Press M/OK to enter the main menu, select VOX, and choose L, M, or H to turn on VOX mode. The screen and sound will turn off in 30 seconds. When the ambient sound from the camera is louder than the set value, the display screen will light up, and you will hear the sound from the speaker. This mode is ideal for nighttime use. The screen will remain off in VOX-on mode; press any button to exit VOX mode.

Figure: Smart Caring Features (Motion, Noise, Cry Detection)
- 5.5 Camera Zoom In:
Press M/OK, choose the Zoom icon (🔍). Select zoom in (🔍1, 🔍2, or 🔍4) and press M/OK to confirm.
Figure: 1080P and 4X Zoom
- 5.6 Camera Display Selection:
Press M/OK, choose the Camera icon (📷). Press Up (▲) or Down (▼) to choose 📷1, 📷2, or 🔄, then press M/OK to enter the sub-menu.
(1) Add camera: Select the Add Camera icon (➕), press M/OK to choose 📷1 or 📷2 for pairing. After successful pairing, the monitor will show the image from 📷1 or 📷2.
(2) Delete camera: Select the Delete Camera icon (🗑️), choose 📷1 or 📷2, and press M/OK. It will prompt for confirmation. Select ❌ to delete. If deletion is successful, the icon 📷 will convert to 📷1, and "no-camera-connection" will be reminded.
(3) Select camera view: Select the Camera icon (📷), then press the M/OK key to see the sub-menu, and choose 📷1 or 📷2 to view the corresponding image. Alternatively, you can choose the cyclic mode icon (🔄) to enter cyclic mode, where the image from camera 1 to camera 2 will switch every 15 seconds.
(4) Camera placement: The camera can be placed on a table or hung upside down. You can set the display image direction (⬆️⬇️⬅️➡️) from the menu. For WiFi network configuration, refer to Section 2.4.

Figure: Supports Two Cameras Simultaneously
- 5.7 Settings:
(1) Time Settings: Press M/OK, choose the Time icon (⏰), select it, then press M/OK to enter the sub-menu. Use Left (◀) or Right (▶) to switch between hour, minute, and second. Use Up (▲) or Down (▼) to adjust hour, minute, and second. Press M/OK to save the time setting and go back.
(2) Volume Adjustment: Press M/OK, choose the Volume icon (🔈), select it, press M/OK to enter the volume control button. Press Left (◀) or Right (▶) to make the volume up/down. There are 6 levels of volume.
(3) Brightness Adjustment: Press M/OK, choose the Brightness icon (🔆), select it, press M/OK to enter the brightness control button. Press Left (◀) or Right (▶) to adjust the brightness of the screen.
(4) Language Settings: Press M/OK, choose the Language icon (🗣️), select it, press M/OK to enter the language list. 8 languages are available.
(5) Low-power Settings: Press M/OK, choose the Low-power icon (🔋), select it, press M/OK to select OFF, 15s, 30s, or 60s.
OFF: Turns off low-power mode.
15s/30s/60s: The monitor screen will automatically dim when no operation is made or no moving object is detected for the selected duration. Press any key to restore the original brightness.(6) WiFi Switch: Press M/OK, choose the WiFi icon (📶), select it. If WiFi is set to OFF, the camera will not connect to the internet, and no image will show in the phone App. If you need to check the camera image, set Wi-Fi to ON. Use Up (▲) or Down (▼) to turn the WiFi switch of the camera OFF/ON. Press M/OK to confirm the settings.
(7) Movement Tracking Switch: Press M/OK, choose the Movement Tracking icon (➡️), select it. If the status is OFF, auto tracking is closed. If the status is ON, the camera will automatically track any moving objects it detects. Use Up (▲) or Down (▼) to turn the tracking OFF/ON. Press M/OK to confirm the settings.
(8) Light Frequency Settings: Press M/OK, choose the Light Frequency icon (⚡), select it, press M/OK to enter light frequency settings. Depending on the country, the light frequency can be set to 50Hz or 60Hz. Use Up (▲) or Down (▼) to select the frequency and press M/OK to confirm the settings.
(9) Set the brightness level of the night light: Press M/OK, choose the Night Light Brightness icon (🌈), select it, press M/OK to set the brightness of the night light. Use Left (◀) or Right (▶) to set the brightness of the night light.
Power Level
The battery icon (🔋) shows the current power level. If the mark (🔋) is lower, the device will emit 5 consecutive beeps, reminding you of LOW BATTERY.
Signal
(1) Signal Mark: The signal mark (📶) indicates signal strength. If there is a large signal tower base station or high-power signal interference equipment in the environment, it may cause transmission interference, and the mark (❌) will appear. When the signal is disconnected for 5 seconds, the mark "No Cam" (📷❌) will appear and flash, and the monitor will beep 5 times. After 5 beeps, the monitor will only show the flashing "No Cam" mark, indicating it is disconnected from the camera.
(2) Camera WiFi Signal: If there is no WiFi signal in the current environment, the mark (📶❌) will appear.
Maintenance
Cleaning
Clean the device with a slightly damp cloth or an antistatic wipe. Never use detergents or abrasive solvents.
Cleaning and Maintenance Guidelines
- Do not use thinner, other solvents, or chemicals to clean any part of the product, as this will damage the product. This damage is not covered by the warranty.
- Do not expose the product to high temperatures, humidity, or strong sunlight, and do not get it wet.
Troubleshooting
- Q: Why is the signal in the room bad?
A: a. Check if the receiving antenna of the displayer terminal is turned on.
b. Due to different materials in house walls, which block 2.4G signals, if the signal is not satisfactory, the display unit's location should be moved. - Q: Why is there always some noise in the background?
A: It is impossible to eliminate all noise. This kind of howling is a common issue in audio. Please keep the displayer and camera separate by over 1.5 meters.
Tip: The microphone of the receiver and camera should not be facing each other. This is a common reason for users experiencing background noise. - Q: Why is the temperature not precisely shown on the screen?
A: a. There is a difference in indoor air circulation.
b. The main reason is that the thermistor has a ±1°C deviation, and there may be shielding around the thermistor, resulting in a difference. - Q: How to eliminate howling?
A: Please keep your receiver and camera separate by 1.5 meters or more.
Tip: The microphone of the receiver and camera should not be facing each other. This is a common reason for users experiencing background noise.
Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Model | ABM206 | Display Size | 4.3-Inch |
| Sensor | CMOS 1/2.7 | Camera Resolution | 1920*1080P |
| View Angle | 75 Degree | Transmission method | 2.4GHz FHSS/WiFi |
| Battery | 3500 mAh | Transmission Distance | 300M (Open Space) |
| Monitor Power Consumption | 1W | Temperature Detection | Support |
| Camera Power Consumption | 1.5W | Cry Reminder | Support |
| Working Temperature | -20°C~65°C | Lullaby | Support |
| Material | ABS | Feeding Reminder | Support |
| Camera Size | D86*105mm (D*T) | Night Vision | Support |
| Monitor Size | 145*76*17mm (L*W*T) | APP | Support |
User Tips
- Optimal WiFi Connection: When connecting the camera to the mobile app, ensure your smartphone is connected to a 2.4GHz WiFi network. The camera only supports 2.4GHz WiFi for initial setup. You can switch back to 5GHz WiFi on your phone after the setup is complete.
- Minimize Interference: For the best signal quality and to avoid background noise (howling), place the monitor and camera at least 1.5 meters apart and away from other electronic devices or large metal objects.
- Temperature Accuracy: Be aware that indoor air circulation and the thermistor's inherent deviation (±1°C) can affect temperature readings. Ensure the sensor is not obstructed for more accurate readings.
Warranty & Support
This product comes with a 1-Year Warranty from the Observer Official Store.
For detailed instructions and further information, you can refer to the official user manual PDF available at: User Manual (PDF).