TTNergy TTN-MAX 11000

Contents

TTNergy 48V MPPT 150A 11KW Solar Inverter User Manual

Model: TTN-MAX 11000

1. Introduction

This manual provides essential information for the safe and efficient operation of your TTNergy 48V MPPT 150A 11KW Solar Inverter. This multi-function inverter/charger combines the capabilities of an inverter, solar charger, and battery charger to deliver uninterrupted power. It features a comprehensive LCD display for user-configurable settings and easy operation.

The TTNergy solar inverter is designed for high performance, reliability, and user-friendliness, supporting both on-grid and off-grid applications. It is adaptable to various power needs, including compensating for weak or intermittent grids.

Front view of the TTNergy solar inverter
Front view of the TTNergy 48V MPPT 150A 11KW Solar Inverter.

2. Setup and Installation

2.1 Unboxing and Inspection

Upon receiving your inverter, carefully open the packaging and inspect the contents for any damage. Ensure all components are present as listed in the packing list.

Inverter packaging contents, showing the inverter, manual, and cables in a box.
Inverter packaging contents, including the unit, manual, and accessories.

2.2 Physical Installation

The inverter should be installed in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Ensure sufficient clearance around the unit for proper airflow. The unit is designed for wall mounting.

2.3 Connections

Refer to the diagrams below for proper connection of solar panels, batteries, utility grid, and loads. Always ensure all connections are secure and follow local electrical codes.

Diagram showing the inverter's role in a solar power system, connecting solar panels, generator, utility grid, battery packs, and home appliances.
System overview: Inverter connections for solar power, generator, utility grid, battery packs, and home appliances.
Detailed diagram of the inverter's ports and controls, including LCD display, status indicators, function buttons, AC input/output, PV connectors, battery connectors, communication ports (parallel, dry contact, USB, BMS, RS-232), RGB LED bar, DC output, and power switch.
Detailed view of inverter ports and controls.

Key Connection Points:

  1. Remote LCD Port: For connecting an optional remote LCD module.
  2. Dry Contact (Genset Starter): For generator auto-start functionality.
  3. BMS Port: For Battery Management System communication (CAN, RS-485, or RS-232).
  4. RS232 Port: For serial communication.
  5. Battery Input: Connect to your 48V battery bank.
  6. AC Output (Load): Connect to your household loads.
  7. AC Input: Connect to the utility grid or generator.
  8. PV Input: Connect to your solar panel array (PV1 and PV2).
  9. Parallel Communication Port: For connecting multiple inverters in parallel.
  10. USB Port: For USB On-the-Go function and communication.
  11. RGB LED Bar: Indicates output source and charge status.
  12. 12V DC Output Connectors (Option): For low-power DC devices like fans or routers.

2.4 Parallel Connection

The TTN-MAX series supports parallel operation of up to 6 units to increase overall system capacity. Refer to the diagram below for power and communication connections in parallel configurations.

Diagram illustrating parallel connection for multiple inverters (2, 3, 4, 5, 6 units) with power and communication connections.
Parallel connection diagrams for 2, 3, 4, 5, and 6 inverters.

3. Operating Instructions

3.1 Control Panel and Indicators

The inverter features an intuitive control panel with an LCD display, status indicators, and function buttons for easy monitoring and configuration.

Close-up of the inverter's display panel with LED indicators and function buttons, along with a table explaining LED indicator messages.
Inverter display panel with LED indicators and function buttons.

LED Indicators:

LED IndicatorColorSolid/FlashingMessages
Setting LED 1GreenSolid OnOutput powered by utility
Setting LED 2GreenSolid OnOutput powered by PV
Setting LED 3GreenSolid OnOutput powered by battery
Status indicators (AC)GreenSolid OnOutput is available in line mode
Status indicators (INV)GreenFlashingOutput is powered by battery in battery mode
Status indicators (CHG)GreenSolid OnBattery is fully charged
Status indicators (CHG)GreenFlashingBattery is charging

3.2 Mobile Monitoring (WiFi)

The inverter includes built-in WiFi for mobile monitoring. Android and iOS applications are available to track performance and status remotely.

Video: Product overview highlighting features like parallel operation, MPPT controller, anti-dust kit, and WiFi monitoring.

4. Maintenance

Regular maintenance ensures the longevity and optimal performance of your inverter. Always disconnect all power sources before performing any maintenance.

  • Cleaning: Keep the inverter's exterior clean and free from dust. The unit features a built-in anti-dust kit for increased reliability in harsh environments.
  • Fan Replacement: The inverter has a replaceable fan design for ease of maintenance. Refer to the detailed instructions in the full manual for fan replacement procedures.
  • Connections Check: Periodically check all electrical connections (PV, battery, AC input/output) to ensure they are tight and free from corrosion.
  • Software Updates: Keep the mobile monitoring application and inverter firmware updated for the best performance and features.

5. Troubleshooting

If you encounter issues with your inverter, refer to the following common problems and solutions. For more complex issues, consult a qualified technician.

ProblemPossible CauseSolution
Inverter not turning onNo battery connection or low battery voltage; AC input not present; Power switch off.Check battery connections and voltage; Verify AC input; Ensure power switch is ON.
No AC outputOverload; Short circuit; Inverter fault.Reduce load; Check for short circuits; Refer to fault indicator messages.
Battery not chargingPV input too low or absent; AC input absent; Charger settings incorrect.Check solar panel connections and sunlight; Verify AC input; Adjust charger settings via LCD.
Inverter making unusual noisesOverload; Fan obstruction; Internal component issue.Reduce load; Check for fan obstructions; Contact support if noise persists.

6. Specifications

Below are the detailed specifications for the TTNergy TTN-MAX 11000 model. Specifications for other models (TTN-Max 8000, 7200, 6500) are also provided for comparison.

FeatureTTN-Max 11000TTN-Max 8000TTN-Max 7200TTN-Max 6500
Capacity11000VA/11000W8000VA/8000W7200VA/7200W6500VA/6500W
Parallel OperationYes, up to 6 units
INPUT
Selectable Voltage Range230 VAC120 VAC
Frequency Range (230V)170-280 VAC (PC); 90-280 VAC (Home Appliances)90-140 VAC (PC); 80-140 VAC (Home Appliances)
OUTPUT
AC Voltage Regulation (Batt. Mode)230 VAC ± 5%120 VAC ± 5%
Surge Power22000VA15000VA15000VA13000VA
Efficiency (Peak)90%~93%
Transfer Time15ms (PC); 20ms (Home Appliances)
WaveformPure sine wave
No Load Power Consumption<70W
BATTERY
Battery Voltage48 VDC
Floating Charge Voltage54 VDC
Overcharge Protection66 VDC
SOLAR CHARGER & AC CHARGER
Solar Charger TypeMPPT
Max. PV Array Open Circuit Voltage500VDC250VDC
MPP Range @ Operating Voltage90~450VDC90~230VDC
Max. PV Array Power11000W (5500W×2)8000W (4000W x2)
Max. Solar Charge Current150 A80 A120A
Max. AC Charge Current150 A80 A120A
Max. Charge Current150 A120 A80 A120A
PHYSICAL
Dimension, DxWxH (mm)147.4 × 432.5 × 553.6
Net Weight (kgs)18.4
Communication InterfaceUSB/RS232/RS485/WiFi/Dry-contact
ENVIRONMENT
Humidity5% to 95% Relative Humidity (Non-condensing)
Operating Temperature-10°C to 50°C-10°C to 40°C
Storage Temperature-15°C to 60°C

Note: The correct matching of battery capacity for the system depends on specific load requirements and application scenarios. Incorrect matching can lead to insufficient battery capacity or wasted power generation. Refer to the full manual recommendation or consult customer service for detailed guidance.

7. User Tips

  • For optimal performance, ensure your solar panel array voltage is within the MPPT operating voltage range (90-450 VDC for TTN-Max 11000).
  • Utilize the built-in WiFi for mobile monitoring to keep track of your system's performance and status from anywhere.
  • When connecting multiple inverters in parallel, ensure all power and communication connections are correctly established as per the provided diagrams to prevent system malfunctions.
  • Regularly check the anti-dust filter and clean it to maintain product reliability, especially in harsh environments.
  • Consider using the optional DC output for low-power devices to maximize efficiency and reduce AC-DC conversion losses.

8. Warranty and Support

The TTNergy Solar Inverter comes with a 2-year warranty. For warranty claims, technical support, or service inquiries, please contact your authorized dealer or TTNergy customer service. Ensure you have your product model and serial number available when contacting support.

For further assistance, you may contact:

  • Email: 1620972590@qq.com
  • WhatsApp: +86 18900786512
  • WeChat: +8618900786512

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.