CONENTOOL 16 Lines Green 4D 360° Self-leveling Laser Level

1. Package Contents

Before starting, please verify that all items listed below are included in your package. If any items are missing or damaged, please contact customer support.

• 1 x 16-line laser level
• 1 x TYPE-C charging cable (charging head not included)
• 1 x Wall Magnetic Bracket
• 1 x Half aluminum triangular fine-tuning base
• 1 x All aluminum lifting platform
• 1 x Remote Control Device
• 1 x Iron plate (for magnetic bracket)
• 1 x Instruction Manual
• 2 x 4500mAh Li-ion Battery
• 1 x Anti-Fall Box (Hard Case)

2. Setup

2.1 Battery Installation and Charging

The laser level is powered by a 4500mAh Li-ion battery. Two batteries are included for extended use.

1. Insert a fully charged battery into the battery compartment on the side of the laser level.
2. To charge the battery, connect the provided Type-C charging cable to the laser level's charging port and a compatible 5V 2A USB power adapter (not included).
3. A full charge typically takes 3-5 hours. The battery provides 7-8 hours of life in 8-line basic mode.
4. For optimal battery health, charge the battery every 2-3 months if not in regular use.

2.2 Mounting and Placement

The CONENTOOL XS2-G offers versatile mounting options for various applications:

• Tripod Mounting: The laser level can be mounted on a standard tripod using its threaded base.
• Lifting Platform Base: Use the all-aluminum lifting platform for precise height adjustments, especially for ground measurements or when a specific working height is required.
• Fine-Tuning Base: The half-aluminum triangular fine-tuning base allows for small, precise angle adjustments on uneven surfaces.
• Wall Magnetic Bracket: Attach the magnetic bracket to a metallic surface or use the included iron plate to mount the laser level on a non-magnetic wall. This allows for flexible positioning and angle adjustments.

3. Operating Instructions

3.1 Power On/Off and Self-Leveling Mode

1. Power On: Slide the main power switch to the 'ON' position. The laser level will automatically enter self-leveling mode.
2. Self-Leveling: In self-leveling mode, the device will automatically level itself within a 3° inclination. If the angle exceeds 3°, the laser light will blink and emit a beep sound, indicating that the device needs to be reset on a flatter surface.
3. Power Off: Slide the main power switch to the 'OFF' position to turn off the device.

3.2 Tilt Mode (Manual Mode)

To use the laser level at any angle (e.g., for stair railings or sloped surfaces), activate the tilt mode:

1. With the device powered off, press and hold the 'H' or 'V' button (or the remote control power button) while sliding the main power switch to 'ON'. This will bypass the self-leveling function.
2. The laser lines will now be fixed at the desired angle, and the alarm will be deactivated.

3.3 Line Selection and Remote Control

The CONENTOOL XS2-G features 16 lines (4D 360°), consisting of 2 horizontal planes and 2 vertical planes. You can select specific lines or combinations using the control panel buttons or the remote control.

• Horizontal Line Switch (H): Press the 'H' button on the device or remote to cycle through horizontal line modes (e.g., one horizontal line, two horizontal lines, or off).
• Vertical Line Switch (V): Press the 'V' button on the device or remote to cycle through vertical line modes (e.g., one vertical line, two vertical lines, or off).
• Remote Control Power: The remote control also has a power button to turn the laser lines on/off remotely.

3.4 Angle Adjustments

The laser level features a double-dimensional 360° pole-less rotation structure with dual rotation shafts (bracket/laser head). This allows for precise angle adjustments without moving the main body of the device.

The device supports 8 sets of angle memory functions, allowing you to quickly recall frequently used projection modes with a single click on the remote control.

3.5 Applications

The CONENTOOL XS2-G is suitable for a wide range of applications, including:

• Tile installation
• Woodworking projects
• Wall hanging and decoration
• Painting and interior renovation
• General construction and layout tasks

4. Maintenance

4.1 Cleaning

• Always turn off the device before cleaning.
• Use a soft, damp cloth to wipe the exterior of the laser level.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the housing or laser components.
• Keep the laser emission windows clean and free of dust or debris to ensure accurate projection.

4.2 Storage

• When not in use, store the laser level in its anti-fall hard case to protect it from impacts and dust.
• Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
• If storing for an extended period, ensure the battery is partially charged (around 50%) and recharge it every 2-3 months to maintain battery health.

4.3 Durability Features

The CONENTOOL XS2-G is designed with durability in mind, featuring dustproof and waterproof capabilities (IP54 rating).

5. Troubleshooting

• Laser lines blinking and beeping: This indicates the device is in self-leveling mode and is inclined more than 3°. Place the laser level on a flatter, more stable surface.
• No laser lines: Ensure the device is powered on and the battery is charged. Check if the laser lines are accidentally turned off via the 'H' or 'V' buttons or the remote control.
• Inaccurate lines: If you suspect the accuracy is off, the device has a self-test calibration function. Refer to the detailed instruction manual for calibration steps. Ensure the device is on a stable surface and not in tilt mode if self-leveling is required.
• Remote control not working: Check the battery in the remote control. Ensure there are no obstructions between the remote and the laser level.

6. Specifications

7. User Tips

• Maximize Battery Life: Utilize the dual battery pack architecture by having one battery charging while the other is in use, especially for long work sessions.
• Quick Setup: For ground measurements, the all-aluminum lifting platform can significantly speed up setup. For ceiling work, the wall-mounted magnetic suction base offers quick and stable positioning.
• Remote Control Efficiency: Familiarize yourself with the remote control to switch between projection modes and adjust angles without needing to constantly approach the device, improving workflow efficiency.
• Understanding Alarms: Pay attention to the blinking laser lines and beep sounds, as they are crucial indicators that the device is out of its self-leveling range and needs adjustment for accurate measurements.

8. Warranty and Support

For any questions, technical assistance, or warranty claims, please contact the seller or CONENTOOL customer support. Keep your purchase receipt as proof of purchase.