1. Introduction
The HUGEROCK CM84 is a professional-grade, rugged handheld Android PDA designed for precise GNSS data collection and RTK GPS applications. This device is ideal for various outdoor tasks such as engineering surveying, acreage surveying, engineering sampling, and point finding. It combines robust hardware with advanced GNSS capabilities to provide reliable and accurate positioning data in challenging environments.
2. Safety Information
Please read and understand all safety instructions before using the device to prevent injury or damage. Keep this manual for future reference.
- Do not expose the device to extreme temperatures, direct sunlight, or excessive moisture.
- Use only approved charging accessories.
- Avoid dropping or subjecting the device to severe impacts.
- Do not attempt to disassemble or repair the device yourself. Refer to qualified service personnel.
- Keep the device away from strong magnetic fields.
3. Package Contents
Verify that all items are present upon unpacking:
- HUGEROCK CM84 Handheld GNSS Receiver Module
- Micro-USB Charging Cable
- User Manual (this document)
4. Device Overview
The CM84 features a compact and ergonomic design, built for durability and ease of use in the field.





Physical Characteristics:
- Dimensions: 122mm (L) × 58mm (W) × 32mm (H)
- Weight: 132g
- Color & Material: Blue (ABS) + Black (TPU)
- Screen: 2.4 Inch, 240 x 320 resolution
- Data Interface: Micro-USB
5. Setup
5.1. Charging the Device
- Connect the Micro-USB cable to the device's Micro-USB port (located at the bottom).
- Connect the other end of the cable to a compatible USB power adapter or computer USB port.
- The device will indicate charging status on the screen. A full charge typically takes a few hours.
5.2. Initial Power On
- Press and hold the Power button (usually located on the side or front panel) until the screen illuminates.
- The device will boot into the Android operating system.
- Follow any on-screen prompts for initial setup, such as language selection and basic configuration.
6. Operating Instructions
6.1. Basic Navigation
Use the physical buttons on the device to navigate through menus and applications. The screen may also support touch input depending on the specific model variant.
6.2. GNSS Data Collection
The CM84 supports multiple global navigation satellite systems for enhanced accuracy and reliability:
- Supported Systems: GPS, Glonass, Beidou, QZSS
- SBAS Support: Yes
- Channels: Max 512 channels
- Frequency: 1Hz
- Tracking Sensitivity: -163dBm
- Capture Sensitivity: -147dBm
- Cold Start Sensitivity: < 28s
- Warm Start Sensitivity: < 2s
- Recapture Time: < 1s
6.3. Accuracy
- Single Point Accuracy: 1~3m
- Speed Accuracy: 0.1m/s
- Position Accuracy: 1-3m
6.4. Typical Applications
The device is optimized for outdoor professional use, including:
- Engineering Surveying
- Acreage Surveying
- Engineering Sampling
- Point Finding
- Land Management
- Geographic Survey
- Forestry Census
- Underground Pipeline Inspection
- Electric Power Inspection

7. Maintenance
7.1. Cleaning
Wipe the device with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure all ports are dry before charging.
7.2. Battery Care
- The device is equipped with a 1700mAh battery.
- For optimal battery life, avoid fully discharging the battery frequently.
- Store the device in a cool, dry place when not in use for extended periods.
7.3. Environmental Conditions
- Operating Temperature: -20°C to 60°C
- Storage Temperature: -30°C to 70°C
Operating outside these ranges may affect device performance and longevity.
8. Troubleshooting
8.1. Device Not Powering On
- Ensure the battery is sufficiently charged. Connect to a power source and try again.
- Press and hold the Power button for at least 10-15 seconds to perform a forced restart.
8.2. Poor GNSS Signal Reception
- Ensure you are in an open area with a clear view of the sky, away from tall buildings or dense foliage.
- Check that GNSS services are enabled in the device settings.
- Allow sufficient time for the device to acquire satellites, especially during a cold start.
8.3. Device Unresponsive
- Perform a forced restart by pressing and holding the Power button.
- If the issue persists, contact support.
9. Specifications
| Category | Feature | Specification |
|---|---|---|
| Hardware | Screen Size | 2.4 Inch |
| Resolution | 240 x 320 | |
| Internal Memory | 16GB | |
| Battery | 1700mAh | |
| Camera | NO | |
| Operating System | Android | |
| GNSS Characteristics | Navigation Satellite System | GPS, Glonass, Beidou, QZSS |
| SBAS | Support | |
| Channel | Max 512 channels | |
| Tracking Sensitivity | -163dBm | |
| Capture Sensitivity | -147dBm | |
| Cold Start Sensitivity | < 28s | |
| Warm Start Sensitivity | < 2s | |
| Recapture Time | < 1s | |
| Frequency | 1Hz | |
| Single Point Accuracy | 1~3m | |
| Speed Accuracy | 0.1m/s | |
| Appearance | Size | 122*58*32mm (L×W×H) |
| Weight | 132g | |
| Color & Material | Blue (ABS) + Black (TPU) | |
| IO/Reliability/Application | Data Interface | Micro-USB |
| Operating Temperature | -20°C to 60°C | |
| Storage Temperature | -30°C to 70°C | |
| Scope Of Application | Outdoor work such as engineering surveying, acreage surveying, and engineering sampling and point finding |
10. User Tips
- For best GNSS performance, ensure the device's antenna has an unobstructed view of the sky.
- Regularly update the device's software to benefit from the latest features and performance improvements.
- Calibrate the compass (if applicable) before critical measurements for improved directional accuracy.
- Consider using a screen protector to prevent scratches during field use.
11. Warranty and Support
11.1. Warranty Information
HUGEROCK is committed to providing high-quality products and excellent after-sales service:
- Life Cycle: Greater than 5 years
- Device Warranty: Two-year warranty
- Free Replacement: Within 30 days for unpacking failure
- Spare Parts Guarantee: 1% spare parts for orders of more than 100 units

11.2. Technical Support
For any questions, technical assistance, or support needs, please contact our customer service team:
- WhatsApp: +86 17891035772
- Email: 1966803907@qq.com
Our team is available to assist you with product inquiries, troubleshooting, and other support-related matters.