HWATEL Omni Direction 5G 4G Antenna

Contents

HWATEL 360 Degree Omni-Directional 5G 4G Antenna

User Manual

1. Introduction

Thank you for choosing the HWATEL 360 Degree Omni-Directional 5G 4G Antenna. This antenna is designed to enhance signal reception for various wireless communication devices, including multi-tower routers, amplifiers, boosters, repeaters, APs, and CPEs. Its omni-directional design ensures 360-degree signal reception, making it ideal for outdoor applications where signals may come from multiple directions.

HWATEL 360 Degree Omni-Directional Antenna
Figure 1: HWATEL 360 Degree Omni-Directional Antenna
Omni Antenna 360 Degree Signal Reception Diagram
Figure 2: Omni-directional antenna receiving signals from multiple 2G, 3G, 4G, and 5G base stations.

2. Package Contents

The standard package includes the following components. Please check to ensure all items are present and undamaged.

  • Omni-Directional Antenna (main unit)
  • Mounting Bracket
  • U-bolt and Clamp (for pole installation)
  • Optional: 10M RG58 Coaxial Cable with selected connector type (N Male, SMA, TS9, or CRC9)
Omni Antenna with mounting bracket and U-bolt clamp
Figure 3: Omni Antenna (main unit) and mounting hardware.
Omni Antenna with 10M RG58 cable and N Male connector
Figure 4: Omni Antenna with 10M RG58 cable and N Male connector variant.
Omni Antenna with 10M RG58 cable and SMA connector
Figure 5: Omni Antenna with 10M RG58 cable and SMA connector variant.
Omni Antenna with 10M RG58 cable and TS9 connector
Figure 6: Omni Antenna with 10M RG58 cable and TS9 connector variant.
Omni Antenna with 10M RG58 cable and CRC9 connector
Figure 7: Omni Antenna with 10M RG58 cable and CRC9 connector variant.

3. Specifications

Below are the detailed technical specifications for the HWATEL Omni-Directional Antenna:

Technical Specification Table for HWATEL Omni Antenna
Figure 8: Detailed Technical Specifications.
Technical Specifications
Category Specification Value
Mechanical Part Number Omni Outdoor Antenna
Material PVC
Material of Radiator Aluminum
Connector Type N-Female
Electrical Frequency 690-6000MHz (5G)
Antenna Gain 3-5dBi
Radiation Type Omnidirectional
Polarization Vertical
Horizontal Beamwidth 360 Degrees
Vertical Beamwidth 75 Degrees (±5 Degrees) / 45 Degrees (±10 Degrees)
Nominal Impedance 50Ω
Max Input Power 50W
Environmental Operation Temperature -40°C ~ +70°C
Storage Temperature -40°C ~ +70°C
RoHS Compliant YES
Antenna dimensions and N-K Female connector detail
Figure 9: Antenna dimensions (22cm / 8.7 inches) and N-K Female connector detail.
Antenna internal components and waterproof shell
Figure 10: Internal view showing PVC waterproof shell, aerial array, and durable outdoor mount.
HWATEL Original RF Cable construction diagram
Figure 11: Construction details of HWATEL Original RF Cable (RG-58/3D-FB/LMR200).

4. Setup and Installation

The antenna is designed for outdoor use and can be installed on a pole or wall-mounted. Choose a location with minimal obstructions and good line-of-sight to cellular towers for optimal performance.

4.1 Choosing an Installation Location

  • Select a high point, such as a rooftop or mast, to minimize signal interference.
  • Ensure the antenna has a clear, unobstructed view in all directions for best omni-directional performance.
  • Avoid placing the antenna near large metal objects, power lines, or other electronic equipment that could cause interference.

4.2 Installation Methods

The antenna supports both pole and wall-mounted installations using the provided bracket and hardware.

Antenna application and installation diagrams
Figure 12: Application scenario showing antenna connected to a router and installation options (Pole and Wall-Mounted).

4.2.1 Pole Installation

  1. Attach the L-shaped pole fixing clip code (mounting bracket) to the bottom of the antenna using the provided screws.
  2. Secure the U-bolt and clamp around the pole and through the holes in the mounting bracket.
  3. Tighten the nuts on the U-bolt to firmly fasten the antenna to the pole.

4.2.2 Wall-Mounted Installation

  1. Attach the L-shaped pole fixing clip code (mounting bracket) to the bottom of the antenna using the provided screws.
  2. Mark the desired drilling points on the wall using the mounting bracket as a template.
  3. Drill holes and insert appropriate wall anchors (not included, depending on wall material).
  4. Secure the mounting bracket to the wall using screws.

4.3 Connecting the Antenna

  1. Connect one end of the coaxial cable (e.g., 10M RG58) to the N-Female connector at the base of the antenna. Ensure a tight and secure connection.
  2. Route the cable to your router, amplifier, or other compatible device, ensuring the cable is protected from damage and moisture.
  3. Connect the other end of the coaxial cable to the corresponding input port on your device. Ensure the connector type matches (N Male, SMA, TS9, or CRC9).

5. Operation

Once the antenna is securely installed and connected to your device, it will passively receive and transmit cellular and Wi-Fi signals. No specific configuration is required for the antenna itself, as its function is to improve the signal strength for the connected device.

  • Signal Enhancement: The omni-directional design allows the antenna to capture signals from all directions, improving the overall signal strength and stability for your connected 5G/4G/3G/2G/Wi-Fi devices.
  • Compatibility: This antenna is compatible with a wide range of devices that operate within the 600-6000MHz frequency range and have the appropriate connector type.
Omni-directional antenna communicating with base stations
Figure 13: Omni-directional antenna receiving and transmitting signals from base stations.

6. Maintenance

The HWATEL Omni-Directional Antenna is designed for durability and minimal maintenance. Follow these guidelines to ensure its longevity and optimal performance:

  • Regular Inspection: Periodically check the antenna and its mounting hardware for any signs of wear, corrosion, or damage, especially after severe weather conditions.
  • Cleanliness: Keep the antenna surface clean from dirt, dust, and debris. Use a soft, damp cloth to wipe it down. Avoid abrasive cleaners or solvents.
  • Cable Integrity: Inspect the coaxial cable for any kinks, cuts, or loose connections. Ensure all connectors are tight and sealed against moisture.
  • Environmental Protection: The antenna features a PVC waterproof shell and an IP67 rating, providing excellent protection against outdoor elements. However, extreme conditions may still require additional checks.

7. Troubleshooting

If you experience issues with your antenna, refer to the following common problems and solutions:

Problem Possible Cause Solution
Poor signal reception Loose cable connections, incorrect antenna placement, damaged cable, interference. Check all cable connections. Relocate the antenna to a higher or less obstructed position. Inspect the cable for damage and replace if necessary. Ensure no large metal objects or electronics are too close.
No signal improvement Antenna not compatible with device, device settings incorrect, very weak ambient signal. Verify antenna frequency range (600-6000MHz) matches your device. Check your device's external antenna settings. In areas with extremely poor signal, even an antenna may have limited effect.
Antenna physically unstable Loose mounting hardware, improper installation. Retighten all screws and bolts on the mounting bracket. Ensure the installation method (pole or wall) is appropriate for the chosen location and securely executed.

8. User Tips

  • For optimal performance, ensure the antenna is mounted as high as possible and away from any large metallic objects that could block or reflect signals.
  • When routing the coaxial cable, avoid sharp bends or kinks, as these can degrade signal quality. Use cable ties to secure the cable and prevent strain on the connectors.
  • Regularly check the weatherproofing of the connectors to prevent water ingress, which can cause signal loss and damage over time.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Manufacturer: HWATEL

Certifications: CE, FCC, RoHS

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.