1. Safety Warnings and Guidelines
For recreation use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.
- The packaging and instructions contain important information and should be kept.
- You are responsible for ensuring that no harm will be caused to the personal and property of others.
- Commissioning and installing of aircraft must be strictly in accordance with the operating instructions. Maintain a distance of 2 to 3 meters between the aircraft and users/other people to prevent injury during flight and landing.
- Our company and distributors are not responsible for any loss, damage, or injury caused by improper use or operation.
- Children under 14 years old are prohibited from operating this product. Children should be guided by adults.
- Install and use correctly according to instructions. Some parts may require adult assembly.
- Contains small parts. Keep out of reach of children to prevent accidental ingestion or suffocation.
- Do not operate on roads or in areas with standing water to avoid accidents.
- Dispose of packing materials promptly to avoid harm to children.
- Do not disassemble or modify the aircraft. This may cause malfunction.
- The charging cable must be inserted into the designated power supply (5V === 2A) that matches the product label.
- Using other charging cables may damage the battery and cause unexpected dangers.
- The charging cable is not a toy.
- When charging the rechargeable battery, it must be under adult supervision and away from flammable materials. Do not leave unattended.
- Do not short-circuit or squeeze the battery to avoid explosion.
- Do not mix different types of lithium batteries.
- The aircraft uses a rechargeable lithium battery, which needs to be removed for charging.
- Do not short-circuit, decompose, or throw the battery into fire. Do not place the battery in high temperature or near electric heating devices.
- Use the aircraft as far away as possible from other electrical equipment and magnetic objects to avoid mutual interference.
- Maintain a safe distance from the high-speed rotating propeller to avoid scalp or cut injuries.
- The motor is a hot part; avoid touching it to prevent burns.
- LED has laser radiation; do not direct the light beam to others.
- Do not use the model near your ears! Misuse may cause hearing damage.
- The USB charging cable provided by the company must be used to charge the battery; otherwise, it may cause serious damage and unexpected danger.
- To meet the magnetic environment requirements of aeronautical radio stations, the model remote control should be stopped within city areas as required by relevant state departments.
- Turn off the switch and unplug the battery when the aircraft battery is depleted. Charge after 30 minutes of rest to prevent battery damage.
2. Product Overview
The 4DRC F8 PRO MAX is a high-performance GPS drone equipped with an 8K professional HD camera, brushless motors, and a foldable design for portability. It features a smart remote control with a built-in screen for real-time image transmission.
2.1 Key Features
- 8K HD Camera: Capture stunning photos and videos with high resolution.
- Brushless Motors: Powerful and efficient for stable flight and long lifespan.
- GPS Positioning: High-precision positioning for stable hovering and advanced flight modes.
- 360° Intelligent Obstacle Avoidance: (F8 MAX model only) Automatic obstacle detection for safer flights, especially for beginners.
- Foldable Design: Compact and lightweight for easy transport.
- Screen Remote Control: Integrated display for low-latency, high-definition image transmission.
- Long Flight Time: Up to 25-30 minutes on a single charge.
- Long Remote Distance: Up to 3000 meters control range.
- Dual Cameras: Front 6K ESC lens and bottom HD lens for versatile shooting perspectives.
2.2 Product Variants
Please note the difference between models:
- F8 MAX: Includes a 360° automatic obstacle avoidance head.
- F8 PRO: Does not include an obstacle avoidance head.

Image: Comparison of F8 PRO (without obstacle avoidance head) and F8 MAX (with 360° automatic obstacle avoidance head).
2.3 Package Contents
- 1 x F8 MAX Drone (with obstacle avoidance, if applicable)
- 1 x Remote Controller
- 1 x Battery (7.4V/3000mAh Lithium Battery)
- 1 x USB Charging Cable
- 4 x Fan blades (spare)
- 1 x User Manual
- 1 x Screwdriver
- 1 x Storage bag
- 1 x Card reader
- 1 x Night light
2.4 Aircraft Components
- Fan blade
- Obstacle Avoidance Radar (F8 MAX only)
- Shell
- Camera (Front 6K ESC lens)
- Optical camera (Bottom HD lens)
- Battery
- Aircraft power switch
- Motor (Brushless)

Image: Close-up of the 6K Dual Camera module, showing the 6K ESC lens and Bottom HD lens.
2.5 Remote Control Components
- Antenna
- Left stick
- Right rocker
- Unlock (long press)
- Power switch (long press)
- Obstacle avoidance switch (long press)
- Headless mode (short press) / one key return (long press)
- Power Indicator
- GPS indicator light
- Obstacle avoidance indicator light
- Return indicator light
- Charging port
- Display screen
- Micro SD card slot
- GPS switch (long press)
- Fine tuning of camera angle
- Horizontal calibration (short press) / Geomagnetic calibration (long press)
- Speed gear

Image: Labeled diagram of the remote control, showing joysticks, buttons, and screen.
3. Setup Guide
3.1 Unfolding the Aircraft
The aircraft is in a folded state when shipped from the factory. Follow these steps to unfold:
- Gently pull out the arms until they are fully extended.
- Ensure all arms are locked into position.

Image: The F8-DRONE in a user's hand, demonstrating its compact, folded size.
3.2 Battery Charging
3.2.1 Aircraft Lithium Battery
- Push the battery rightwards to remove it from the aircraft.
- Connect the USB charging cable to a 5V === 2A power adapter or a computer USB port.
- Connect the other end of the charging cable to the battery socket.
- The red indicator on the battery will be ON during charging and turn OFF when fully charged.
Note: When the aircraft is not in use, do not leave the battery installed in the aircraft to avoid damage.
3.2.2 Remote Control Battery
- Plug the USB interface of the USB charging cable into a computer USB port or a 5V === 2A power adapter.
- Plug the other end of the USB charging cable into the charging port of the remote controller.
- During charging, all indicator lights on the remote controller will light up in sequence and remain ON when fully charged.
Warning: Only use the aircraft charging cable provided by the factory. Other charging cables may cause accidents.
3.3 MicroSD Card Installation
Insert the MicroSD card carefully into the slot until it clicks firmly into position. To remove, gently press the card until you hear a click, then pull it out. Ensure the card is installed before powering on the drone for photo/video capture.
Note: A MicroSD card must be installed to capture photos and videos during flight.
3.4 Radar Installation (F8 MAX only)
- Use a flat-blade screwdriver to gently pry the parts on the drone body where the radar will be installed.
- Align the radar part and press it onto the body, ensuring the two sides are butted correctly.
Note: The radar components contain electronic parts. Do not expose them to water or humid environments.
3.5 Propeller Installation
The fan blades are marked with letters 'A' and 'B'. Install them correctly according to the diagram to ensure proper flight. Incorrect installation will prevent the aircraft from taking off.
- Unscrew the screw on the motor.
- Attach the correct propeller (A or B) to the corresponding motor.
- Secure the propeller with the screw.
3.6 APP Download and Installation
- For Android: Scan the QR code provided in the manual or on the product packaging. Choose to open and download the '4DRC PRO' APP in your browser.
- For iOS: Scan the QR code to download the '4DRC PRO' APP from the App Store.
3.7 Pre-flight Preparation (Remote Control)
- Power On Aircraft: Turn on the aircraft and place it on a horizontal surface. It will automatically enter frequency matching state, and the fuselage lights will flash. Ensure the nose faces forward.
- Remote Control Frequency Matching:
- Long press the remote control power switch. The indicator light will flash.
- Push the left joystick to the top, then to the bottom.
- Successful matching is indicated by the aircraft lights turning solid (no longer flashing).
- WIFI Connection:
- Turn on Wi-Fi on your mobile device (phone/tablet).
- Connect to the network named "4DRC*******".
- Open the '4DRC PRO' APP.
Note: Ensure sufficient power for both aircraft and remote control before attempting to take off.
- Horizontal Calibration:
- Short press the horizontal calibration button on the remote control.
- The blue and red lights on the aircraft will flash quickly. When they become solid, calibration is complete, and the remote control will beep.
Note: The aircraft must be on a horizontal surface during calibration.
- Geomagnetic Calibration:
- Long press the geomagnetic calibration key until the front blue light and rear red light flash on the aircraft.
- Rotate the aircraft clockwise horizontally until the front blue light and rear red light flash slowly. The remote control will beep, indicating horizontal calibration is complete.
- Pick up the aircraft with its nose vertically down and rotate clockwise until the blue light on the front and red light on the rear are solid. The remote control will beep, indicating guide calibration is complete.
Note: After geomagnetic calibration, perform level calibration again.
- Star Search Status (GPS Mode):
- In GPS mode, the GPS indicator on the remote control flashes slowly, indicating satellite search.
- When the GPS indicator on the remote control is solid and the red indicator on the aircraft flashes, satellite search is successful, and the remote control will beep. The aircraft can then be unlocked for takeoff.
Note: Wait a few minutes for the first search. The drone can only take off when the APP shows three or more satellite signal bars (or the remote control displays 10+ satellite indices).
4. Operating Instructions
4.1 Basic Flight Controls (Remote Control)
The remote control uses two joysticks for flight control:
- Left Joystick (Throttle):
- Push UP: Increases main blade rotation, aircraft rises.
- Push DOWN: Decreases main blade rotation, aircraft descends.
- Left Joystick (Rudder):
- Push LEFT: Aircraft nose turns left.
- Push RIGHT: Aircraft nose turns right.
- Right Joystick (Forward/Backward):
- Push UP: Aircraft moves forward.
- Push DOWN: Aircraft moves backward.
- Right Joystick (Left/Right Sideways):
- Push LEFT: Aircraft fuselage deviates left.
- Push RIGHT: Aircraft fuselage deviates right.
Warning: When the aircraft is within 1m of the ground, it may become unstable due to "ground effect response" (blade vortex). The lower the height, the greater the effect.
4.2 Start/Stop (GPS Mode)
To unlock the aircraft for takeoff:
- Push both the left and right joysticks outwards simultaneously.
- Alternatively, long press the unlock key on the remote control.
Note: If satellite search is not successful, the aircraft cannot be unlocked or take off.
4.3 Obstacle Avoidance Mode (F8 MAX only)
To activate obstacle avoidance mode, long press the obstacle avoidance switch key on the remote control. The aircraft will automatically hover and stop moving forward if it approaches obstacles. To deactivate, long press the switch again.
Note: The obstacle avoidance effect may be weak or lost under strong sunlight, with transparent/reflective objects (e.g., glass), or with black objects.
4.4 One-Key Return
Press the return button on the remote control, and the aircraft will return to the position above the takeoff point. If flying below safe altitude, it will automatically rise. Manually control the directional lever to avoid obstacles during descent.
Out-of-control return: If remote control signal is lost for ~4 seconds, the aircraft will automatically return to the last known signal area. Low-battery return: The aircraft will be forced to return to a point ~10 meters above takeoff when the battery is low. Low-battery return cannot be canceled.
4.5 Headless Mode
The aircraft's front is set by default when code-matching. To adjust direction in headless mode, re-match the code and short press the remote controller's "headless mode" function key. Short press again to exit.
Special Tip: Ensure the aircraft is aligned with a straight line for the gyroscope to detect it automatically, enabling straight-line flight in headless mode.
4.6 Speed Switching
The aircraft defaults to low-speed mode (3-gear switching) after takeoff.
- Push the wheel remote controller RIGHT: One beep for low-speed, two beeps for high-speed, three beeps for highest speed.
- Push the wheel remote controller LEFT: Lowers the speed gear.
4.7 Lens Adjustment
Pull the fine-tuning wheel of the camera angle on the remote controller to adjust the camera angle as needed.
4.8 Normal Mode Start/Stop (Indoor Operation)
For indoor operation, switch to normal mode (GPS indicator on remote control is OFF).
- Long press the GPS button on the remote control until the GPS indicator turns OFF.
- Push the left and right joysticks outwards to unlock, or long press the unlock key.
- Push up the left joystick to take off.
4.9 APP Control Interface Functions
The APP provides various functions for enhanced control and flight experience:
- Display Screen Interface: Shows satellite signal, flight status, WIFI signal, aircraft battery power, parameter settings, photo/video, shutter, media library, filter, flight record, zoom.
- Flight Modes: Multipoint flight, orbital flight, GPS follow mode.
- Gesture Recognition: Use specific hand gestures for photo and video capture.
- MV Interface: Apply filters and record short videos.
Note: After becoming proficient, close novice mode and adjust flight distance/altitude settings for extended flight range.
4.9.1 Multipoint Flight Mode
In GPS mode, access "More Functions" in the APP, then select "Waypoint Flight". On the map interface, set single or continuous waypoints. The aircraft will fly along the preset trajectory. You can control direction with the joystick during flight.
4.9.2 Orbital Flight Mode
In GPS mode, select "More Features" then "Orbit Flight" in the APP. The aircraft will automatically orbit in a customizable radius. Push the right joystick to adjust orbital speed (left/right) or radius (front/rear). Press the orbit button again to end the flight.
4.9.3 GPS Follow Mode
In GPS mode, select "More Functions" then "Follow" in the APP. The aircraft will track your mobile device's location. Lightly press the red icon to cancel following.
4.9.4 Gesture Recognition
When facing the camera's front lens, click the gesture photo button in the APP. Perform the following gestures:
- "Yeah" Gesture: Make a "Yeah" gesture with one hand horizontally about 3m in front of the lens. The aircraft will count down 3 seconds and take photos.
- Palm Gesture: Put five fingers together and lift one hand horizontally about 3m in front of the lens. The aircraft will start recording. Recording ends when the gesture is re-recognized (with a time difference > 3s).
Special prompt: Aim directly at the lens and perform gesture recognition at a position about 2-3M away from the lens and in an environment with good light and background.
4.9.5 MV Interface
Click the "filter interface" icon in the APP. Choose a filter effect, then click the recording icon to start recording. The synthesized video or picture will be saved to the media library.
Special prompt: During recording, you can rotate the screen or switch filters. You can also use the joystick to control direction and altitude.
5. Maintenance
- Regularly inspect propellers for damage. Replace any broken or bent blades immediately.
- Keep the drone and remote control clean and free from dust and debris. Use a soft, dry cloth.
- Store the drone in its storage bag in a cool, dry place away from direct sunlight.
- Ensure batteries are fully charged before storage if not used for an extended period, but do not store fully charged for very long periods. Refer to battery manufacturer guidelines for long-term storage.
- Avoid exposing the drone to extreme temperatures or humidity.
- Check all connections and moving parts periodically for wear and tear.
6. Troubleshooting Guide
| Question | Reason | Solution |
|---|---|---|
| The aircraft indicator flashes without any response. | 1. Geomagnetic anomaly 2. The aircraft has insufficient power | 1. Move the aircraft to an open area and recalibrate the geomagnetism (refer to Section 3.7). 2. Charge the battery. |
| The blades of the aircraft rotate but cannot fly. | 1. Low battery 2.1 Blade deformation 2.2 Installation error of AB propeller | 1. Charge the battery. 2.1 Replace the deformed blade. 2.2 Ensure A1/A2 and B1/B2 blades are installed correctly. |
| The aircraft vibrates badly. | Blade deformation | Replace the blade. |
| Fine tuning is done but still can't make the aircraft stable. | 1. Blade deformation 2. Defective motor | 1. Replace the blade. 2. Replace the motor. |
| After impact, the aircraft starts again and flies uncontrollably. | The three-axis acceleration sensor loses its balance due to impact. | Rest the aircraft for 5-10 seconds, or perform geomagnetic and level calibration (refer to Section 3.7). |
7. Specifications
| Feature | Specification |
|---|---|
| Drone Model | F8 MAX Brushless Drone with screen |
| Channel | 4 Channels |
| Gyro | 6 Axis |
| Motor Type | Brushless Motor |
| Electric Adjustment Camera Angle | 80° |
| Camera Wide Angle | 100° |
| Video Maximum Resolution | 6K (5780*2890) |
| Laser Obstacle Avoidance | 360° (F8 MAX only) |
| Remote Control Distance | About 3000 Meters |
| Image Transmission Distance | 2000 Meters |
| Flight Altitude | 120M |
| Drone Battery | 7.4V/3000mAh Lithium Battery |
| Flight Time | Max 25-30 Minutes |
| Quadcopter Unfolded Size | 220*180*75MM |
| Quadcopter Folded Size | 140*90*75MM |
| Quadcopter Weight | About 248g (with battery) |
| Battery Weight | About 90g |
| Charging Time | About 3-4 hours |
| Remote Control System | Remote control unit/APP |
| Material Quality | ABS/ Electronic components |
| Aircraf Operating Frequency | 2.4 GHz |
| Frequency | 5GHz |
| APP Supported Languages | Japanese, French, German, Italian, Spanish, Korean, Portuguese, English, Simplified Chinese, Traditional Chinese Style, Swedish, Polish, Russian |

Image: Diagram showing the developed and folded dimensions of the drone.
8. User Tips
- Camera Quality: The drone features an 8K HD camera for high-quality aerial photography. Ensure good lighting conditions for optimal results.
- Battery Life: With a flight time of 25-30 minutes, consider purchasing additional batteries for extended flight sessions.
- Obstacle Avoidance: While the F8 MAX model has 360° obstacle avoidance, always fly in open areas and remain vigilant, especially in complex environments.
9. Statement of Compliance
9.1 Disclaimer
⚠️ For recreation use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.
10. Warranty and Support
For any issues or support, please refer to the official 4DRC Official Store or contact customer service through the platform where the product was purchased.
PDF User Manual: A detailed user manual in PDF format is available for download. Please refer to the product page for the direct link: User manual (PDF)
11. Product Video
Video: A demonstration of the 4DRC F8 PRO MAX drone's features, including flight, remote control operation, and camera capabilities.