Safety Warnings
Study, understand, and follow all instructions provided with this product. Read these instructions carefully before installing, operating, servicing, or repairing this tool. Keep these instructions in a safe, accessible place.
Caution: To help prevent personal injury:
- Never use this tool for any application other than for which it was designed.
- Never alter or modify this tool in any way. Improper operation and/or maintenance of the tool, or modification of the tool could result in serious injury or death.
- Always perform automotive testing in a safe environment.
- Do not attempt to operate or observe the tool while driving a vehicle. Operating or observing the tool will cause driver distraction and could cause a fatal accident.
- Wear safety eye protection that meets ANSI standards.
- Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.
- Operate the vehicle in a well-ventilated work area: Exhaust gases are poisonous.
- Put blocks in front of the drive wheels and never leave the vehicle unattended while running tests.
- Use extreme caution when working around the ignition coil, distributor cap, ignition wires, and spark plugs. These components create hazardous voltages when the engine is running.
- Put the transmission in P (for A/T) or N (for M/T), and make sure the parking brake is engaged.
- Keep a fire extinguisher suitable for gasoline/chemical/electrical fires nearby.
- Don't connect or disconnect any test equipment while the ignition is on or the engine is running.
- Keep this tool dry, clean, free from oil/water or grease. Use a mild detergent on a clean cloth to clean the outside of the tool, when necessary.
1. Introduction
The LAUNCH X431 ELITE V3.0 is a professional diagnostic tool designed to work with OBD II compliant vehicles, specifically optimized for Hyundai and Kia models. It provides comprehensive diagnostic capabilities, including full system scanning, bi-directional control, ECU coding, and various reset functions.
1.1 Vehicle Coverage
This diagnostic tool is specially designed to work with all OBD II compliant vehicles, including Controller Area Network (CAN). EPA regulations require that all 1996 and newer vehicles (cars and light trucks) sold in the United States must be OBD II compliant. This includes American, Asian, and European vehicles. A small number of 1994 and 1995 model year gasoline vehicles are also OBD II compliant. To verify compliance for 1994 or 1995 vehicles, check the Vehicle Emissions Control Information (VECI) Label, usually located under the hood or by the radiator. If the vehicle is OBD II compliant, the label will state "OBD II Certified".
1.2 On-Board Diagnostics (OBD) II Overview
The OBD II system monitors emission control systems and key engine components by performing continuous or periodic tests. It provides information on:
- Whether the Malfunction Indicator Light (MIL) is commanded “on” or “off”.
- Which, if any, Diagnostic Trouble Codes (DTCs) are stored.
- Readiness Monitor status.
1.3 OBD II Definitions
- EOBD:
- European On-Board Diagnostics. Essentially the same as OBD II, with the same Data Link Connector and Communication Protocols.
- Communication Protocols:
- Allows different systems and sensors in a vehicle to communicate. Currently, five protocols are used: CAN Bus, J1850 VPW, ISO 9141-2, J1850 PWM, ISO 14230 KWP.
- Powertrain Control Module (PCM):
- The OBD II accepted term for the vehicle's "on-board computer." It controls engine management, emissions systems, and often powertrain operation.
- DLC (Data Link Connector):
- The 16-cavity connector on the vehicle that allows communication between the computer system and the diagnostic tool.
- MIL (Malfunction Indicator Light):
- The vehicle's “Check Engine” warning light that activates when a DTC is stored.
- DTC (Diagnostic Trouble Code):
- A code stored in the computer system's memory, identifying a fault condition causing the MIL to activate.
- Freeze Frame Data:
- Operating conditions that are stored when a DTC is set.
- PID (Parameter Identification Data):
- Data returned by the vehicle's control modules to the diagnostic tool.
- Monitors:
- “Diagnostic routines” programmed into the PCM to run diagnostic tests and monitor emissions-related components.
- Enabling Criteria:
- Vehicle-specific events or conditions that must occur for monitors to run. May require a specific "drive cycle" routine.
- Trip:
- A period during which all required “Enabling Criteria” for a specific monitor are met.
- Drive Cycle:
- A specific mode of vehicle operation that provides conditions to set all applicable readiness monitors. Necessary after DTCs are erased or battery disconnected.
- Warm-up Cycle:
- Vehicle operation after an engine off period where engine temperature rises. PCM uses these cycles to automatically erase codes if the problem is no longer detected.
- Fuel Trim (FT):
- Feedback adjustments to the base fuel schedule. Short-term refers to instantaneous adjustments, long-term to gradual adjustments.
1.4 Diagnostic Trouble Codes (DTCs) Structure
OBD II DTCs are five-digit alphanumeric codes. The first character (a letter) identifies the control system. The second character (a number 0-3) and the remaining three characters (hex 0-9 or A-F) provide additional information on the DTC's origin and operating conditions.

Example of a Diagnostic Trouble Code (DTC) structure, showing P0202 and its breakdown into system, malfunctioning section, code type, and sub-systems.
1.5 Location of the Data Link Connector (DLC)
The DLC is typically a 16-pin connector where diagnostic code readers interface with the vehicle's on-board computer. It is usually located 12 inches from the center of the instrument panel, under or around the driver's side. For some vehicles with special designs, the DLC location may vary. Refer to your vehicle's service manual for the exact location if needed.

Common DLC locations: A-Opel, Volkswagen, Audi; B-Honda; C-Volkswagen; D-Opel, Volkswagen, Citroen; E-Changan; F-Hyundai, Daewoo, Kia, Honda, Toyota, Nissan, Mitsubishi, Renault, Opel, BMW, Mercedes-Benz, Mazda, Volkswagen, Audi, GM, Chrysler, Peugeot, Regal, Beijing Jeep, Citroen and other most popular models.
2. Product Components and Specifications
2.1 Components & Controls

Diagram of the LAUNCH X431 ELITE V3.0 with labeled components.
| No. | Name | Description |
|---|---|---|
| 1 | Charging port | Charge the tool via data cable (not included). |
| 2 | DB-15 diagnostic connector | Connect the diagnostic cable. |
| 3 | Power button | Turn on/off the tool. |
| 4 | Touch screen | Indicate the test results. |
| 5 | BACK button | Exit the current program or return to the previous screen. |
| 6 | HOME button | Navigate to the home (Job menu) screen. |
| 7 | Settings button | Quick dial to the Settings module. |
2.2 Technical Specifications
- Screen: 4" touch screen with a resolution of 480*800
- CPU: 4-core 1.3GHz processor
- RAM: 2GB
- ROM: 16GB
- WiFi: 802.11b/g/n 2.4GHz
- OBD II input voltage range: 9~18V
- Power up via: DC 5V data cable (not included) or Diagnostic cable through connection to vehicle's DLC
- Working temperature: -10 to 50°C (14 to 122 F°)
- Storage temperature: -20 to 70°C (-4 to 158 F°)
2.3 Accessories Checklist
For detailed accessory items, please consult the seller. The standard package includes:
- Diagnostic scanner (Main Unit)
- Diagnostic cable (OBD Diagnostic Cable)
- User manual
- Quick start guide

LAUNCH Creader Elite V2.0 diagnostic tool and accessories in packaging.

Diagnostic tool and OBD cable in clear plastic tray packaging.

OBD diagnostic cable.
3. Initial Setup
3.1 Powering Up The Tool
There are two methods available for powering up the tool:
- Via Data Cable: Plug one end of a data cable (not included) into the charging port of the tool, and the other end to a PC.
- Via Diagnostic Cable: Insert the diagnostic cable into the vehicle's DLC port.
When the tool is powered on, the screen will automatically light up.
3.2 Getting Started (First-time Use)
If it is the first time you have used this tool, you need to make some system settings:
- Press the [POWER] button to turn on the tool. The screen displays a welcome page. Tap "Start" to go to the next step.
- Choose the desired system language, and tap "Next step".
- Choose the time zone of your current location. The system will automatically configure the time according to the time zone you selected.
- The system will automatically search for all available Wi-Fi networks. Choose the Wi-Fi needed.
- After the network connection is done, tap "Next step" to configure workshop information. Input the required information, and tap "Next step” to go to the next step. (Note: After configuration, this information will be appended to every report generated.)
- Carefully read all terms and conditions of the user agreement, check "Agree to all the above terms”, and tap "OK" to complete the registration process. It will automatically jump to the Job Menu.
3.3 Job Menu Overview
The Job Menu includes the following main function modules:
- Diagnose: Configures the tool to operate as a professional diagnostic tool.
- OBD II: Provides a quick way to check for DTCs, isolate MIL causes, check monitor status, verify repairs, and perform other emission-related services.
- Upgrade: Updates vehicle diagnostic software and APK. (Requires a stable network connection.)
- Mall: Allows subscription to extra vehicle diagnostic software or reset (special function) software not included with the tool.
- Settings: Manages data and system settings, including Network setup, Workshop information, and Brightness.

Main Job Menu screen.
4. Operating Instructions
4.1 Connection to Vehicle
- Turn the vehicle ignition off.
- Locate the vehicle's 16-pin Data Link Connector (DLC). Refer to Section 1.5 for common locations.
- Plug one end of the diagnostic cable into the vehicle's DLC port, and the other end to the DB-15 diagnostic connector of the tool. Tighten the captive screws. (Note: A plastic DLC cover may need to be removed. The cable connector is keyed and fits only one way; rotate 180° if connection is difficult.)
- Turn the ignition on. The engine can be off or running.
Video demonstrating the unboxing, connection, and initial setup of the LAUNCH X431 Elite diagnostic tool.

LAUNCH X431 Elite V3.0 diagnostic tool connected to a vehicle's OBD-II port.
4.2 System Diagnosing
This function is designed to diagnose electronic control systems of a single vehicle model.
4.2.1 Smart Diagnosis (Auto-Detect)
This function allows quick access to electronic control systems by decoding the VIN, without manual menu selection. After connection and ignition on, the system enters auto-detect mode.
- Ensure "Automatic detection on connect" in "Settings" is ON.
- A stable network connection is recommended for successful VIN access.
If VIN information is successfully obtained, the system scans vehicle systems and generates a diagnostic report (accessible via Settings -> Data -> Diagnostic Report). If VIN access fails, you will be prompted to manually input the VIN.
4.2.2 Manual Diagnosis
If the tool cannot obtain VIN information, you can perform Manual Diagnosis by executing menu-driven commands. Before diagnosing, ensure the corresponding vehicle manufacturer software is installed.
- Select "Diagnose" from the Job Menu.
- Select Vehicle Manufacturer.
- Select Vehicle Model.
- Select Scan Mode (Automatic System Detection or Manual System Detection).
- Select Test Function.
4.2.2.1 Health Report (Quick Test)
This function quickly accesses all electronic control units (ECUs) and generates a detailed report on vehicle health. Tap "Health Report" on the test item selection screen to start scanning.
4.2.2.2 System Scan
This option quickly scans which systems are installed on the vehicle.
4.2.2.3 System Selection
Manually select the test system and function step-by-step. Tap "System Selection” and then the desired system (e.g., “Engine”) to enter the test function selection screen.
A. Read Fault Code
Displays detailed information of DTC records from the vehicle's control system. On-screen buttons include:
- Report: Save diagnostic results as a report.
- Clear Code: Clear existing diagnostic trouble codes.
- Help: View help information.
- Code Search: Search for more information about the current DTC online.
B. Clear Fault Code
Erases codes from the vehicle after repairs. Ensure the ignition key is in the ON position with the engine off. (Note: Clearing DTCs does not fix the underlying problem; proper repairs are necessary.)
C. Read Data Stream (4-in-1 Live Data)
Retrieves and displays live data and parameters from the vehicle's ECU. You can select up to 4 items to view simultaneously, with options for Value, Graph, and Combine displays. Values outside the standard range will be displayed in red.

4-in-1 Live Data graphing and data record/replay.
D. Special Functions (All Reset Services)
Offers coding, reset, relearn, and other service functions to restore vehicle functionality after repair or replacement. Available tests vary by vehicle manufacturer, model, and year. The tool supports over 30 reset functions, including:
- EPB Reset (Electronic Parking Brake Reset): Resets brake pad position after replacement.
- Oil Lamp Reset: Resets oil service light and service interval.
- SAS Reset (Steering Angle Calibration Reset): Corrects steering wheel angle.
- BMS Reset (Battery Register / Battery Maintenance): Re-matches battery after replacement.
- ABS Brake Bleeding: Performs brake operation for fluid change.
- SUS Reset (Suspension): Levels body height sensor in air suspension system.
- TPMS Reset (Tire Pressure Monitor System Reset): Looks up tire sensor, resets pressure, and turns off MIL.
- GEAR Reset (Gear Learning): Necessary if crankshaft position sensor is replaced.
- Injector Reset (Injector Coding): Writes new code into ECU after injector replacement.
- AFS Reset (Adaptive Frontlighting System): Controls automatic headlight activation and adjustment.
- Other functions: Intelligent Cruise Control, Engine Power Balance Monitoring, Motor Angle Calibration, Head Light Fitting, Seat Matching/Calibration, Door and Window Initialization Study/Calibration, Sunroof Initialization, Air Suspension Matching, Gearbox Matching, Injector Calibration, Multimedia Video Reset, Cluster Reset, Tire Change Reset, Coolant Bleed, NOx Sensor Reset, Stop/Start Reset, Transport Mode, Adblue Reset, A/F, A/C Relearn, and more.

Overview of various reset and service functions.
4.3 OBD II Diagnosis
After connecting the tool to the vehicle's DLC and tapping “OBD II” in the Job Menu, the tool will automatically check the communication protocol and display Monitor Status. Tap "OK" to access the following functions:
- Read Codes: Identifies malfunctioning sections of the emission control system.
- Erase Codes: Clears codes from the vehicle after repairs.
- I/M Readiness: Checks if emissions-related systems are operating properly for Inspection and Maintenance testing.
- Data Stream: Retrieves and displays live data and parameters.
- View Freeze Frame: Captures a snapshot of operating conditions when an emission-related fault occurs.
- O2 Sensor Test: Retrieves O2 sensor monitor test results.
- On-board Monitor Test: Retrieves test results for non-continuously monitored powertrain components.
- EVAP System Test: Initiates a leak test for the vehicle's EVAP system.
- Vehicle Info: Retrieves VIN, CID (Calibration ID), and CVN (Calibration Verification Number).
4.4 Bi-directional Control
With bi-directional communication capabilities, this diagnostic tool can not only read vehicle data but also send commands to the vehicle and perform active tests (e.g., component action tests, system function checks). This is crucial for complex diagnostic and repair tasks.

Bi-directional control examples including Fuel Pump & Value Test, Injector Buzz Test, Radiator Fan, Sunroof/Windows/Doors, Modulate The Throttle, Acceleration Device Test, Turn Lights ON/OFF, Active Grille Shutter, A/C Compressor Activation, Turn Sound Horn ON/OFF, Auto Start/Auto Stop.
4.5 Advanced ECU Coding
ECU coding allows you to personalize your car's functions. The LAUNCH X431 Elite for HYUNDAI AND KIA is equipped with high-end ECU Coding functions consistent with the X431 series, designed for scenarios such as:
- Component Matching: Generates and registers a unique code for new or replaced parts/actuators.
- ECU Replacement: Ensures the ECU accurately recognizes and activates new parts.
- Retrofit/Modification: Promotes smooth communication between vehicle systems.
- Flash Hidden Functions: Unlocks potential vehicle functions or disables inconvenient ones according to preferences.

ECU Coding features and examples.
5. Maintenance and Updates
5.1 Software Update
The diagnostic app and software are updated periodically. It is recommended to install the latest versions for best service and experience.
- Diagnostic software pre-installed on the tool is free of charge forever.
- Diagnostic software purchased from the “Mall” is free for one year. After expiration, a subscription renewal is required.
To update, tap "Upgrade” on the Job menu to enter the update center. Ensure a strong and stable Wi-Fi connection. Select desired software and tap "Update".
5.2 Renew Subscription
When the free period for purchased diagnostic software expires, it will be locked. To unlock, renew the subscription. Tap "Upgrade” on the Job menu, select the expired software, tap “Renew”, and input the 24-digit pin code from your Subscription Renewal Card.
5.3 Clean Up
This option allows you to clear cache files and free up storage space.
5.4 Firmware Fix
Use this module to upgrade and fix diagnostic firmware. Do not cut power or switch interfaces during this process.
6. Settings
The Settings menu allows you to customize various aspects of the tool's operation:
- Units of measurement: Set to Metric System or English System.
- Automatic detection on connect: Enable or disable automatic VIN detection upon connection.
- Brightness: Adjust screen brightness and standby time. (Reducing brightness conserves power.)
- Sound: Adjust volume and other sound settings.
- Network: Configure WLAN for registration, software updates, and email.
- Time Zone: Set the device's time zone.
- Language: Change the system language. Supported languages include English, Traditional Chinese, Spanish, French, German, Italian, Russian, Portuguese, Japanese, Korean, and Polish.
- Workshop information: Add a personalized tag to diagnostic reports.
- Recovery: Reset the tool to default factory settings. (Warning: May cause data loss.)
- Screen Capture: Toggle the screen capture icon visibility.
- About: Displays hardware configuration and license agreement.
- Data: Access Diagnostic Record, Diagnostic Report, DTC Library, and DLC Location information.
- Feedback: Send diagnostic problem feedback for analysis.
- Image: View and manage screenshots taken during diagnostic work.
- User Manual: Access the integrated user manual on the tool.

Supported languages for the diagnostic tool.
7. Troubleshooting (FAQ)
- Q: System halts when reading data stream. What is the reason?
- A: It may be caused by a slackened connector. Turn the tool off, firmly connect the connector, and switch it on again.
- Q: Screen of the tool flashes at engine ignition start.
- A: Caused by electromagnetic disturbance, and this is a normal phenomenon.
- Q: There is no response when communicating with on-board computer.
- A: Confirm proper power supply voltage, check if the throttle has been closed, the transmission is in neutral, and water temperature is proper.
- Q: What to do if the system fails to start auto VIN detection?
- A: Check if the tool is properly connected to the vehicle's DLC port. Also, ensure the “Automatic detection on Connect" switch is ON in Settings.
- Q: Why are there so many fault codes?
- A: Usually, it's caused by poor connection or fault circuit grounding.
- Q: How to upgrade the system?
- A: Switch the tool on and ensure a stable internet connection. Tap "Settings" on the Job Menu, select "About" -> "Version", and tap "Detect the System Version” to enter the system upgrading page. Follow on-screen instructions. The process may take several minutes. After upgrade, the tool will automatically restart.
8. Specifications
8.1 Technical Specifications
- Screen: 4" touch screen with a resolution of 480*800
- CPU: 4-core 1.3GHz processor
- RAM: 2GB
- ROM: 16GB
- WiFi: 802.11b/g/n 2.4GHz
- OBD II input voltage range: 9~18V
- Power (W): 5V 1.5A 7.5W
- Is Batteries Included: Yes
- Working temperature: -10 to 50°C (14 to 122 F°)
- Storage temperature: -20 to 70°C (-4 to 158 F°)
8.2 Package Contents
- LAUNCH X431 ELITE V3.0 Main Unit
- OBD Diagnostic Cable
- User Manual
- Quick Start Guide
9. User Tips
- Confirm Reset Success: After performing a reset function, if the tool does not explicitly display a success message, it's advisable to re-check the relevant system or perform a quick diagnostic scan to confirm the reset was successful.
- Language Accuracy: While the tool supports multiple languages, be aware that some translations, especially for technical terms, might be less precise. Refer to the English version or consult official documentation if you encounter unclear phrasing.
- Feature Compatibility: Always verify if specific advanced features (e.g., ADAS support, DPF regeneration, or specific air conditioning system controls) are compatible with your exact vehicle make, model, and year before relying on them.
- Software for Other Brands: The X431 ELITE V3.0 is optimized for Hyundai and Kia. If you intend to use it for other vehicle brands, be aware that additional software licenses may be required and might operate on a subscription basis.
10. Warranty and Support
10.1 Copyright Information
Copyright © 2023 by LAUNCH TECH CO., LTD. (also called LAUNCH for short). All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, and recording or otherwise, without prior written permission.
Statement: LAUNCH owns the complete intellectual property rights for the software used by this product. For any reverse engineering or cracking actions against the software, LAUNCH will block the use of this product and reserve the right to pursue their legal liabilities.
10.2 Disclaimer of Warranties and Limitation of Liabilities
All information, illustrations, and specifications in this manual are based on the latest information available at the time of publication. The right is reserved to make changes at any time without notice. We shall not be liable for any direct, special, incidental, indirect damages or any economic consequential damages (including the loss of profits) due to the use of the document.
10.3 Warranty
This warranty is expressly limited to persons who purchase LAUNCH® products for purposes of resale or use in the ordinary course of the buyer's business.
LAUNCH® electronic product is warranted against defects in materials and workmanship for one year (12 months) from date of delivery to the user.
This warranty does not cover any part that has been abused, altered, used for a purpose other than for which it was intended, or used in a manner inconsistent with instructions regarding use. The exclusive remedy for any automotive meter found to be defective is repair or replacement, and LAUNCH shall not be liable for any consequential or incidental damages.
Final determination of defects shall be made by LAUNCH in accordance with stipulated procedures.
10.4 Customer Service
If you have any questions on the operation of the unit, please contact the seller, or contact LAUNCH TECH CO., LTD.:
- Website: www.x431.com, www.cnlaunch.com
- Phone: +86 755 2593 8674
- Email: DOD@cnlaunch.com