Hippcron 12V Cordless Electric Angle Grinder

1. Introduction

Thank you for choosing the Hippcron 12V Cordless Electric Angle Grinder. This versatile and compact tool is designed for a variety of tasks including cutting, grinding, and polishing of materials such as metal, wood, stone, and tile. Featuring a powerful 19500rpm motor and a lightweight, ergonomic design, it offers efficient and precise performance for both professional and home improvement projects. Please read this manual carefully before use to ensure safe and optimal operation.

2. Safety Instructions

Always follow basic safety precautions when using electric tools to reduce the risk of fire, electric shock, and personal injury.

• Wear appropriate personal protective equipment (PPE) including safety glasses, gloves, and hearing protection.
• Ensure the workpiece is securely clamped before starting any operation.
• Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
• Avoid accidental starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the tool.
• Do not force the power tool. Use the correct power tool for your application.
• Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation.
• Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.
• Do not use the tool for applications other than those intended.

3. Product Overview

Familiarize yourself with the components and features of your Hippcron Angle Grinder.

Figure 3.1: Labeled diagram of the Angle Grinder components.

Components:

• Angle Grinding Disc: The abrasive disc used for cutting or grinding.
• Safety Shield: Protects the user from sparks and debris.
• Power Indicator Light: Shows battery charge status.
• Lightweight Single Hand Operation: Ergonomic design for ease of use.
• 12V Power Battery: Rechargeable lithium battery (3*3.7V, 2000mAh).
• Bearing Switch: On/Off switch.
• Heating Vent: Dissipates heat from the motor.
• Pure Copper Motor: High-performance motor.
• Quick Stop Design: For immediate cessation of disc rotation.
• Anti Slip Design: Provides a secure grip.

Key Features:

• Powerful Brush Motor: Ensures quick starts, timely braking, and stable performance.
• High Rotational Speed: 19500rpm for fast material removal.
• Durable Construction: High speed, low noise, and fine durability.
• Easy Disc Swapping: Human-designed spindle lock for quick accessory changes.
• Ergonomic Handle: Designed for comfortable one-handed operation with convenient side switches.
• Thickened Baffle Design: Reduces splashes and extends machine lifespan.
• Adjustable Cover: Tool-free adjustment of the safety shield.
• Efficient Heat Dissipation: Vent holes prevent overheating.
• Versatile Applications: Suitable for metal cutting, rust removal, welding scar polishing, metal polishing, wood cutting, and wood polishing.

Figure 3.2: Internal view highlighting the pure copper motor, precision steel gears, and cooling system.

4. Specifications

Note: Size manual measurement, there may be 1-3mm error.

Figure 4.1: Product dimensions and net weight.

5. Setup

5.1. Unpacking and Package Contents

Carefully unpack all items and check against the packing list:

• 1 x Electric Grinding Tool
• 1 x Battery
• 1 x Adapter (Charger)
• 1 x Guideline (Instruction Manual)
• 2 x Cutting Discs
• 1 x Wrench

Figure 5.1: Contents of the product package.

5.2. Charging the Battery

1. Connect the adapter to a suitable power outlet.
2. Insert the battery into the adapter's charging port.
3. Allow the battery to charge fully before first use. The power indicator light on the grinder will show charging status (refer to Section 3. Product Overview for indicator light location).

5.3. Installing/Changing the Grinding Disc

1. Ensure the battery is removed from the grinder for safety.
2. Press and hold the spindle lock button (refer to Figure 3.2 for location).
3. Use the provided wrench to loosen the flange nut counter-clockwise.
4. Place the desired grinding disc onto the spindle, ensuring it is centered.
5. Re-attach the flange nut and tighten it clockwise with the wrench while holding the spindle lock button. Do not overtighten.
6. Release the spindle lock button.

Figure 5.2: Disc installation steps (1-4).

5.4. Adjusting the Safety Shield

The safety shield can be adjusted without tools. Simply rotate it to the desired position to provide maximum protection for the specific task and angle of operation.

5.5. Installing the Battery

Align the battery pack with the base of the grinder and slide it in until it clicks securely into place.

6. Operating Instructions

6.1. Powering On/Off

• To turn ON: Slide the side switch (Bearing Switch) to the 'ON' position. The disc will immediately begin to rotate.
• To turn OFF: Slide the side switch to the 'OFF' position. The quick stop design will rapidly halt the disc rotation.

6.2. General Operation Guidelines

• Always hold the grinder firmly with one hand, utilizing the anti-slip grip.
• Allow the disc to reach full speed before making contact with the workpiece.
• Apply light, consistent pressure. Do not force the tool, as this can lead to kickback or damage to the tool/workpiece.
• Move the grinder smoothly across the material.
• For cutting, use the edge of the disc. For grinding/polishing, use the face of the disc at a slight angle to the workpiece.
• Be aware of sparks and debris. Ensure the safety shield is correctly positioned.

6.3. Applications

This angle grinder is suitable for a wide range of tasks:

Figure 6.1: Multiple scenarios for using the angle grinder.

• Metal Cutting: For various metal sheets, pipes, and rods.
• Remove Rust Metal: Efficiently removes rust and corrosion from metal surfaces.
• Welding Scar Polishing: Smooths out rough welding seams.
• Metal Polishing: Achieves a smooth finish on metal.
• Wood Cutting: For precise cuts in wood materials.
• Wood Polishing: Sands and polishes wood surfaces.
• Interior Decoration: Wall panel grooving, floor cutting, ceramic tile cutting.
• Property Maintenance: Equipment maintenance, hydropower installation, PVC pipe cutting.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your tool.

• Cleaning: Regularly clean the tool, especially the heating vents, to prevent dust and debris buildup. Use a soft brush or compressed air. Ensure the tool is disconnected from the battery before cleaning.
• Disc Replacement: Replace grinding discs when they become worn, chipped, or damaged. Follow the instructions in Section 5.3.
• Battery Care: Store batteries in a cool, dry place. Do not expose them to extreme temperatures. Charge the battery fully before storing for extended periods.
• Inspection: Periodically inspect the tool for any signs of damage, loose parts, or wear. If any issues are found, discontinue use and contact customer support.

8. Troubleshooting

9. User Tips

• For optimal battery life, avoid completely draining the battery before recharging.
• When cutting or grinding, let the tool do the work. Excessive force can strain the motor and reduce efficiency.
• Always choose the correct type of disc for the material you are working on (e.g., diamond cutting disc for tile/stone, abrasive disc for metal).
• Keep spare discs readily available, as they wear down with use.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.