1. Introduction
This manual provides detailed instructions for installing and setting up the LSC14 Car Android Head Unit Cable Harness with CAN Bus and MOST Audio Decoder. This cable adapter is designed to seamlessly connect your Android head unit to your car's existing wiring harness without requiring any wire cutting, ensuring a consistent and simplified installation process.
The LSC14 harness facilitates the transmission of essential car signals, including ACC (Accessory), reverse gear, parking, lights, and steering wheel button controls, to your Android head unit. Additional functionalities are dependent on the specific CAN Bus interface of your original car radio.
Important: Before purchasing, carefully compare your car's cable plug and the socket on the back of your old radio with the provided plug pictures to confirm compatibility. If you are unsure, please contact Pinmany support for assistance.
2. Package Contents
The LSC14 cable harness is available in two configurations. Please verify your purchase to ensure you have the correct components.
2.1 LSC14 with CAN Bus Box
- 1 x Power Wire Harness
- 2 x AUX Wire Harness
- 1 x CAN Bus Box
2.2 Only Wire Harness (No CAN Bus Decoder)
- 1 x Power Wire Harness
- 2 x AUX Wire Harness
3. Specifications
| Feature | Detail |
|---|---|
| Model Name | LSC14 |
| Brand Name | Pinmany |
| Item Type | Cables, Adapters & Sockets |
| Special Features | Harness connector, CAN Bus, MOST audio Decoder |
| Voltage | 12 V |
| Item Weight | 400g |
| Origin | Mainland China |
| CANBus Brand | Luzheng |
| Package Dimensions (L x W x H) | 25cm x 18cm x 3cm |
4. Compatibility
4.1 Compatible Car Models
- Toyota Alphard 2013 (with MOST module)
- Lexus IS250/IS300 2010~2012 (with MOST module)
Note: Due to regional differences and variations in car configurations, the above compatibility is for reference only. It is crucial to confirm that your car's existing wire harness plug matches the socket on our harness before purchase.
4.2 Compatible Android Head Units
This product is designed to adapt to 7, 8, 9, and 10-inch Android head units. The wiring harness is ONLY compatible with head units featuring a 16-pin main interface and specific extended interfaces as shown in the diagrams.
5. Setup Instructions
Follow these steps to connect the cable harness and configure the CAN Bus on your Android head unit. The setup method may vary slightly depending on your specific Android head unit model. If you encounter difficulties, please consult your head unit vendor.
5.1 Step 1: Connect the Cable Adapter
- Locate the 16-pin power plug on the wiring harness and connect it to the corresponding 16-pin power socket on your Android head unit.
- Find the 8-pin UART plug on the wiring harness and connect it to the 8-pin UART socket of your Android head unit.
- If your Android head unit is equipped with a 20-pin AV cable, connect it.
- Connect the CAN-Bus and MOST Box (if included in your package) to the appropriate connectors on the wiring harness.
- Connect the red and white connectors of the AUX L/R IN cable and the Audio L/R IN cable to the corresponding red and white connectors of the 20-pin cable.
5.2 Step 2: Set up CAN Bus on Android Head Unit
- On your Android head unit, navigate to "Car Settings".
- Select "Factory" or "Factory Settings".
- You will be prompted to enter a factory password. Common passwords include:
3368,1617,8317,8888. If none of these work, please consult the seller of your Android radio for the correct password. - Once inside the factory settings, locate and select "CAN bus setting".
5.3 Step 3: Select CAN Bus Box Manufacturer and Car Model
- Within the CAN bus settings, select the manufacturer of your CAN Bus Box (e.g., "Luzheng/Haozheng").
- Choose the correct car model and year from the available options (e.g., "Toyota/Lexus" -> "LEXUSIS_L01 (06Lexus IS Low)").
- Save your selections and reboot the Android head unit for changes to take effect.
6. Operating Instructions
Once correctly installed and configured, the LSC14 cable harness enables your Android head unit to receive various control signals from your vehicle. These include:
- ACC (Accessory) power signal
- Reverse gear signal
- Parking brake signal
- Vehicle lighting signals
- Steering wheel button controls
The specific operation of these features will be managed directly through your Android head unit's interface. Refer to your Android head unit's user manual for detailed instructions on how to utilize these integrated car functions.
7. Maintenance
The LSC14 cable harness is designed for durability and requires minimal maintenance. To ensure optimal performance and longevity:
- Ensure all connections remain secure and free from dust or debris.
- Avoid exposing the harness to excessive moisture or extreme temperatures.
- Periodically check for any signs of wear or loose connections, especially after any other vehicle modifications.
8. Troubleshooting
If you encounter issues after installation, consider the following:
- No Power to Head Unit: Double-check all power connections, especially the 16-pin power plug. Ensure the car's fuse for the radio is intact.
- Steering Wheel Controls Not Working: Verify that the CAN Bus Box is correctly connected and configured in your Android head unit's settings (refer to Section 5.2 and 5.3). Ensure the correct CAN Bus manufacturer and car model are selected.
- Reverse Camera/Parking Signal Issues: Confirm the reverse gear and parking signals are correctly wired and recognized by the Android head unit.
- Audio Issues (with MOST module): Ensure the MOST audio decoder is properly connected and configured. Check the AUX L/R IN and Audio L/R IN cable connections.
- Incompatible Car Model: The harness is specifically designed for Toyota Alphard (2013 with MOST) and Lexus IS250/IS300 (2010-2012 with MOST). If your vehicle is a different model (e.g., Toyota Hilux 2021, Lexus IS250F sport with a different CAN bus), this harness may not be compatible. Always verify your car's specific CAN bus and wiring before purchase.
- Unknown Factory Password: If you cannot access the factory settings on your Android head unit due to an unknown password, contact your Android head unit vendor for assistance.
If problems persist, please contact Pinmany customer support for further assistance.
9. User Tips
- Verify Compatibility Thoroughly: Before making a purchase, always compare the images of the harness connectors with your car's existing wiring and your Android head unit's ports. This is especially important for specific car models and years, as CAN bus types can vary significantly.
- Consult Head Unit Vendor for Passwords: If your Android head unit requires a factory password to access CAN Bus settings and you don't know it, contact the head unit's manufacturer or seller. Do not attempt random passwords excessively, as this might lock the device.
- Professional Installation Recommended: While designed for DIY installation, if you are uncomfortable with car electronics, consider professional installation to avoid potential damage.
10. Warranty and Support
Pinmany is committed to providing high-quality products and excellent customer service. For any questions or concerns regarding your LSC14 cable harness, please contact our customer support team. We are here to assist you until you are satisfied.
For support inquiries, please refer to the contact information provided by your retailer or visit the official Pinmany store.