haozee Haozee Tuya Smart Zigbee/Wifi Smoke Detector

Contents

Haozee Tuya Smart Zigbee/Wifi Smoke Detector User Manual

Model: Haozee Tuya Smart Zigbee/Wifi Smoke Detector

1. Introduction

The Haozee Tuya Smart Zigbee/Wifi Smoke Detector is a crucial component for enhancing your home's safety and security. This device provides real-time smoke detection and alerts, integrating seamlessly with smart home platforms like Tuya Smart Life, and offering compatibility with Amazon Alexa and Google Home. This manual provides detailed instructions for the installation, operation, and maintenance of your smoke detector.

There are two versions of this smoke detector:

  • Wifi Version: Operates independently and does not require a separate hub.
  • Zigbee Version: Requires a Tuya Zigbee hub to function. Ensure you have the correct hub for your Zigbee device.
Haozee Tuya Smart Zigbee/Wifi Smoke Detector
Figure 1: Haozee Tuya Smart Zigbee/Wifi Smoke Detector (Zigbee and Wifi versions shown)

2. Product Features

The Haozee Smart Smoke Detector is designed with advanced features to provide reliable fire protection:

  • High Sensitivity: 360° comprehensive high-sensitive monitoring for early smoke detection.
  • Real-time Detection: Continuously monitors for smoke and fire hazards.
  • Loud Alarm: Emits an alarm sound exceeding 90dB (at 3 meters) upon detection.
  • Mobile App Control & Alerts: Receive instant notifications on your mobile phone via the Tuya/Smart Life app.
  • Low Power Consumption: Designed for efficiency with a low voltage and fault prompt function.
  • Strong Anti-interference: Ensures reliable performance in various environments.
  • Compatibility: Works with Amazon Alexa and Google Home for integrated smart home control.
  • Eco-friendly Material: Constructed from fireproof ABS material, offering excellent corrosion and heat resistance.
Smart smoke sensor features diagram
Figure 2: Key features of the Smart Smoke Sensor, including compatibility with Amazon Alexa/Google Home, strong anti-interference, real-time detection, Wifi control, mobile app alarm, smoke alarm, high decibel alarm, high sensitivity, and low power consumption.
Types of fire smoke detected by the sensor
Figure 3: The smoke detector is suitable for detecting various types of fire smoke, including those from solid fuels (wood, paper, clothes), combustible gas (natural gas), flammable liquids (gasoline, diesel, formaldehyde), and charged materials (wire short circuit or aging).
Eco friendly ABS fireproof material
Figure 4: The smoke detector is made from eco-friendly ABS fireproof material, known for excellent corrosion and heat resistance.

3. Specifications

ParameterValue
Power SupplyDC3V
Stand-by Current<20uA
Alarm Current<100mA
Low Voltage Warning2.5V ± 0.1V
Alarm Volume>90dB (3m forward)
Installation Hole Distance60 mm
Working Temperature-10°C ~ +50°C
Operating Humidity≤95%
Operating StandardEN14604-2005
Smart Home PlatformTuya Smart Life
CompatibilityAmazon Alexa / Google Assistant

4. Setup and Installation

4.1. Before Installation

  • Ensure you have the correct version (Wifi or Zigbee) for your smart home setup.
  • For the Zigbee version, a Tuya Zigbee hub is required and must be set up prior to installing the smoke detector.
  • Download the "Tuya Smart" or "Smart Life" app from your mobile app store and create an account.
  • Prepare the necessary batteries (DC3V). Note: Batteries are not included and must be purchased separately. Please check the product packaging for the exact battery type required (e.g., CR123A or AA/AAA).

4.2. Mounting the Detector

  1. Choose an appropriate location for installation. Smoke detectors should be installed on the ceiling or high on a wall, away from corners, vents, and areas with high humidity. Refer to local fire safety regulations for optimal placement.
  2. Use the provided mounting bracket and screws to securely attach the detector to the chosen surface. The installation hole distance is 60 mm.
  3. Insert the batteries into the detector, ensuring correct polarity.
  4. Attach the smoke detector to the mounting bracket by twisting it clockwise until it clicks into place.
360 degree smoke detection diagram
Figure 5: The smoke detector features a 360° intake photoelectric sensor for full detection of smoke, indicating optimal ceiling placement.

4.3. Pairing with Tuya Smart Life App

  1. Open the Tuya Smart or Smart Life app on your smartphone.
  2. Ensure your phone is connected to a 2.4GHz Wi-Fi network (for Wifi version) or that your Zigbee hub is online (for Zigbee version).
  3. For Wifi Version: Follow the in-app instructions to add a new device. Typically, you will select "Security & Sensor" -> "Smoke Detector (Wi-Fi)". Put the device into pairing mode (usually by pressing and holding the "TEST" button until the indicator light flashes rapidly).
  4. For Zigbee Version: Ensure your Tuya Zigbee hub is already added to the app. Then, add a sub-device to the hub. Select "Security & Sensor" -> "Smoke Detector (Zigbee)". Put the device into pairing mode (usually by pressing and holding the "TEST" button until the indicator light flashes rapidly).
  5. Once successfully paired, the device will appear in your app, and you can customize its settings and receive alerts.
Haozee Zigbee Smoke Detector
Figure 6: The Zigbee version of the smoke detector, which requires a Tuya Zigbee hub for operation.

5. Operation

5.1. Normal Operation

In normal operation, the detector continuously monitors for smoke. The indicator light may flash periodically (e.g., every 30-60 seconds) to indicate normal function. Refer to the specific light patterns in the app or product documentation for detailed status indications.

5.2. Alarm Activation

When smoke or a fire hazard is detected, the red indicator light will flash rapidly, and the built-in buzzer will emit a loud alarm sound exceeding 90dB. Simultaneously, you will receive an instant notification on your paired mobile device via the Tuya Smart Life app.

Smoke detector quick response and loud alarm
Figure 7: Illustration of the smoke detector's quick response, with the red indicator light flashing and a loud alarm sound (90dB) emitted upon smoke detection.

5.3. Test Button

The "TEST" button on the detector allows you to manually test its functionality. Press and hold the "TEST" button for a few seconds. The alarm should sound, and the indicator light should flash, confirming the device is working correctly.

5.4. Mute Button

The "MUTE" button (often combined with the "TEST" button) can be used to temporarily silence the alarm during a non-emergency event (e.g., cooking smoke). Press the "MUTE" button once to silence the alarm. The detector will automatically reset after a few minutes if the smoke clears.

5.5. Low Battery Warning

When the battery voltage drops to 2.5V ± 0.1V, the detector will issue a low battery warning, typically indicated by a chirp or specific light pattern. Replace the batteries immediately when this warning occurs.

6. Maintenance

Regular maintenance ensures the optimal performance and longevity of your smoke detector.

  • Monthly Test: Press the "TEST" button once a month to ensure the alarm sounds.
  • Battery Replacement: Replace batteries immediately when the low battery warning is activated. Always use the recommended battery type.
  • Cleaning: Dust and debris can interfere with the detector's sensitivity. Gently vacuum the detector's vents or wipe it with a soft, damp cloth at least once a year. Do not use cleaning sprays or solvents.
  • Avoid Painting: Never paint the smoke detector, as this can block the smoke entry points and prevent the alarm from functioning correctly.

7. Troubleshooting

ProblemPossible CauseSolution
Detector does not alarm during test.Dead or low batteries; incorrect battery installation; device malfunction.Replace batteries; check battery polarity; if problem persists, contact support.
Frequent false alarms.Dust accumulation; proximity to cooking fumes, steam, or high humidity; insect infestation.Clean the detector; relocate the detector away from sources of false alarms; check for insects.
Low battery warning (chirping/flashing).Batteries are low.Replace all batteries immediately.
Detector not connecting to app.Incorrect pairing mode; Wi-Fi issues (2.4GHz only); Zigbee hub offline (for Zigbee version); app issues.Ensure correct pairing mode; check Wi-Fi network (2.4GHz); verify Zigbee hub status; restart app/device.

8. Warranty and Support

For warranty information, please refer to the product packaging or contact the seller directly. Keep your purchase receipt as proof of purchase.

For technical support, troubleshooting, or further assistance with the Tuya Smart Life app integration, please refer to the in-app help resources or the official Tuya Smart Life support channels.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.