Jebao DFD Series (DFD-250, DFD-250B, DFD-500, DFD-500B)

Contents

Jebao Jecod DFD Series Intelligent Automatic Fish Tank Feeder

Instruction Manual

Introduction

Thank you for choosing the Jebao Jecod DFD Series Intelligent Automatic Fish Tank Feeder. This device is designed to provide convenient and precise feeding for your aquarium fish, featuring digital timing and wireless control options. This manual will guide you through the setup, operation, and maintenance of your feeder to ensure optimal performance and the well-being of your aquatic pets.

Jebao Jecod DFD Series Automatic Fish Feeder
Jebao Jecod DFD Series Automatic Fish Feeder (DFD-250B model shown)

Setup

1. Unpacking and Components

Carefully remove all components from the packaging. Ensure you have the feeder unit and any included mounting accessories.

2. Battery Installation

The feeder operates on batteries. Install new batteries according to the polarity markings. New batteries typically last up to 60 days.

Battery life indicator showing 60 days
Battery life indicator. New batteries provide approximately 60 days of operation.

3. Mounting the Feeder

The feeder can be mounted to the rim of your aquarium. Ensure the clampable thickness of your aquarium glass is within the specified limits for your model (18mm for DFD-250/DFD-250B, 27mm for DFD-500/DFD-500B). Securely attach the feeder, ensuring the food dispenser is positioned correctly over the water surface.

4. Filling the Food Chamber

Open the top lid of the food chamber. Fill the chamber with your desired fish food. The feeder is compatible with various food types:

  • Granular
  • Powdered
  • Strip-shaped
  • Dried insect type
Illustration of different fish food types compatible with the feeder
The feeder supports various food types including granular, powdered, strip-shaped, and dried insect type.

Ensure the food chamber is not overfilled to prevent blockages. Close the lid securely after filling.

5. Initial Connectivity (Bluetooth)

All DFD Series models feature Bluetooth connectivity. Refer to the specific instructions for your model to pair it with your smartphone or control device. This will allow for wireless remote control and digital timing setup.

Operating Instructions

1. Manual Feeding

Most models include a manual feed button. Pressing this button will dispense a single portion of food immediately. This is useful for testing or providing extra food outside of scheduled feedings.

2. Setting Up Digital Timing and Feeding Levels

Utilize the Bluetooth connection and the dedicated app (if applicable) to program feeding schedules. You can set specific times for feeding and adjust the feeding level (amount of food dispensed) for each scheduled feed.

  • DFD-250B & DFD-500B: Offer 3-level A&M feeding settings.
  • DFD-250 & DFD-500: Offer 6-level A&M feeding settings for finer control.

The internal spiral mechanism ensures consistent dispensing.

Top view of the feeder's internal spiral dispensing mechanism
Internal spiral mechanism for precise food dispensing.

3. Wireless Remote Control

Once connected via Bluetooth, you can use the app to remotely trigger feedings, adjust schedules, and monitor the feeder's status from your smartphone.

Maintenance

1. Cleaning the Food Chamber

Regularly check the food chamber for any moisture or clumping. If necessary, remove any remaining food, detach the chamber, and clean it with warm water. Ensure it is completely dry before refilling and reattaching.

2. Cleaning the Dispensing Mechanism

Periodically inspect the spiral dispensing mechanism for food residue buildup. Use a small brush or cotton swab to gently clean any accumulated debris. Ensure the mechanism moves freely.

3. Battery Replacement

When the battery indicator shows low power, replace the batteries promptly to ensure uninterrupted feeding. Always use the recommended battery type.

Troubleshooting

  • Feeder not dispensing food:
    • Check if the food chamber is empty.
    • Ensure the food is not clumped or blocking the dispensing mechanism.
    • Verify that the batteries have sufficient power.
    • Check if the dispensing mechanism is clean and free of debris.
  • Feeder not connecting via Bluetooth:
    • Ensure Bluetooth is enabled on your control device.
    • Make sure the feeder is within range.
    • Restart both the feeder and your control device.
    • Check the app for any specific pairing instructions or error messages.
  • Incorrect feeding times or amounts:
    • Review your programmed schedule in the app.
    • Ensure the feeder's internal clock is synchronized correctly.
    • Verify the feeding level settings for each scheduled feed.
  • Food getting wet:
    • Ensure the feeder is securely mounted and the dispensing opening is clear of the water surface.
    • Check that the food chamber lid is properly sealed.
    • Consider using a moisture-absorbing packet in the food chamber if humidity is high.

Specifications

FeatureDFD-250 / DFD-250BDFD-500 / DFD-500B
Brand NameJebao
MaterialPlastic
OriginMainland China
Battery IncludedNo
High-concerned chemicalNone
Volume250ml500ml
Min Output50g
Max Output200g
Pellets Size≤3mm≤6mm
Feeding Level SettingDFD-250B: 3-level A&M
DFD-250: 6-level A&M
DFD-500B: 3-level A&M
DFD-500: 6-level A&M
Clampable Thickness18mm27mm
Product Dimensions (excluding extension chamber)12×5.7×11cm15.7×7×13.5cm
ConnectivityBluetooth
Battery LifeUp to 60 days (with new batteries)

Model Specific Images:

DFD-250B model with specifications
DFD-250B Model: Practical Indicator Light Model, Pellets Size ≤3mm, 3-level A&M Feeding, 18mm Clampable Thickness, 12×5.7×11cm Dimensions.
DFD-500B model with specifications
DFD-500B Model: Practical Indicator Light Model, Pellets Size ≤6mm, 3-level A&M Feeding, 27mm Clampable Thickness, 15.7×7×13.5cm Dimensions.
DFD-250 model with specifications
DFD-250 Model: High-end LCD Screen Model, Pellets Size ≤3mm, 6-level A&M Feeding, 18mm Clampable Thickness, 12×5.7×11cm Dimensions.
DFD-500 model with specifications
DFD-500 Model: High-end LCD Screen Model, Pellets Size ≤6mm, 6-level A&M Feeding, 27mm Clampable Thickness, 15.7×7×13.5cm Dimensions.

User Tips

  • Test before use: Always perform a few manual test feedings to ensure the correct portion size is dispensed before relying on automatic feeding.
  • Monitor food levels: Regularly check the food chamber to ensure there's enough food, especially before extended periods away.
  • Avoid moisture: Keep the feeder away from excessive humidity or splashing water to prevent food from clumping.
  • Battery check: Keep spare batteries on hand and replace them proactively to avoid interruptions in feeding schedules.
  • App updates: Ensure your feeder's control app is always updated to the latest version for optimal performance and new features.

Warranty and Support

Jebao products are manufactured to high-quality standards. For any issues or questions regarding your DFD Series feeder, please contact the retailer or manufacturer's customer support. Keep your purchase receipt as proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.