Introduction
Thank you for choosing the K&F Concept B174A1 Lightweight Aluminum Tripod. This manual provides detailed instructions for the proper setup, operation, and maintenance of your tripod. Please read this manual carefully before use to ensure optimal performance and longevity of your product.

1. Setup
1.1 Unfolding the Tripod
- Place the tripod on a flat, stable surface.
- Gently extend the tripod legs outwards until they are fully spread, ensuring the tripod is stable.
- Loosen the leg locks on each section and extend the legs to your desired height. Securely fasten the leg locks.
- To further increase height, rotate the center column locking knob counter-clockwise, extend the center column, and then tighten the knob clockwise to secure it.


1.2 Attaching Your Device (Camera or Smartphone)
- The tripod features a 2-in-1 quick release plate compatible with both cameras and smartphones.
- For Cameras: Ensure the 1/4 inch screw on the quick release plate is securely fastened to your camera's tripod mount. Slide the quick release plate with the camera into the tripod head until it clicks into place. Tighten the locking knob to prevent accidental loosening.
- For Smartphones: Extend the smartphone holder on the quick release plate. Place your smartphone (compatible with 4.3-6.8 inch screens) into the holder and ensure it is securely gripped. Slide the quick release plate with the phone into the tripod head and tighten the locking knob.
- The cold shoe interface on the phone holder supports accessories like fill lights or microphones.



2. Operating the Tripod
2.1 Angle Adjustment
- The 3-way pan head allows for versatile angle adjustments.
- Tilt Adjustment: Loosen the handle to adjust the vertical tilt angle between +100° and -75°. Tighten the handle to lock the desired angle.
- Panoramic Rotation: Loosen the knob at the base of the head to rotate the tripod head 360° horizontally for panoramic shots. Tighten the knob to secure the position.
- Vertical Shooting: The tripod head supports 90° horizontal and vertical shooting by adjusting the knob.



2.2 Remote Shutter Control
- The included Bluetooth remote control allows for convenient shutter release from a distance (up to 10m/393 feet).
- Pairing: Turn on the remote control. On your smartphone, go to Bluetooth settings and select the remote (e.g., 'AB Shutter 3') to pair.
- Once paired, open your camera app and press the corresponding button on the remote to take photos or start/stop video recording.
3. Maintenance
Proper maintenance ensures the longevity and optimal performance of your tripod.
- Cleaning: After each use, especially in dusty or sandy environments, wipe down the tripod legs and head with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and then dry thoroughly. Avoid harsh chemicals or abrasive materials.
- Lubrication: Periodically check the moving parts (leg locks, head mechanisms). If they feel stiff, apply a small amount of silicone-based lubricant. Do not over-lubricate.
- Storage: Store the tripod in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure it is fully collapsed and clean before storing. The compact folded length of 420mm (16.5 inches) makes it easy to store in its carrying bag or a backpack.
- Inspection: Regularly inspect all screws, knobs, and leg locks to ensure they are tight and functioning correctly.

4. Troubleshooting
If you encounter any issues with your K&F Concept B174A1 Tripod, please refer to the following common problems and solutions:
- Tripod is unstable:
- Ensure all leg locks are securely tightened after extending the legs.
- Verify that the center column locking knob is fully tightened if the center column is extended.
- Make sure the tripod is placed on a level surface.
- Check the unique support structure at the base of the legs for proper deployment.
- Device (camera/phone) is not secure on the head:
- Ensure the quick release plate is correctly inserted and the locking knob on the tripod head is fully tightened.
- For cameras, confirm the 1/4 inch screw is tightly fastened to the camera's tripod mount.
- For smartphones, ensure the phone holder grips the device firmly.
- Bluetooth remote not connecting:
- Ensure the remote control is turned on and has sufficient battery power.
- Check that Bluetooth is enabled on your smartphone.
- Unpair and re-pair the remote in your smartphone's Bluetooth settings.
- Ensure the remote is within the 10m (393 feet) operating range.
- Stiff leg locks or head movement:
- Clean any dirt or debris from the mechanisms.
- Apply a small amount of silicone-based lubricant to the moving parts.
5. Specifications
| Feature | Specification |
|---|---|
| Brand Name | K&F CONCEPT |
| Model Number | Aluminum Lightweight Tripod (B174A1) |
| Material | Aluminum |
| Type | Mini Tripod / Lightweight |
| Use | Video Camera, Smartphone |
| Max Extended Length | 1524mm (59.4 inches) |
| Folded Length | 420mm (16.5 inches) |
| Weight | 762g (1.68 lbs) |
| Package | Yes |
| High-concerned chemical | None |
| Origin | Mainland China |
6. User Tips
- When shooting outdoors, always ensure the tripod is on stable ground. If the ground is uneven, adjust the leg lengths individually to level the tripod.
- For maximum stability, extend the thicker leg sections first before extending the thinner ones.
- Avoid over-tightening knobs and locks, as this can cause wear and tear over time. Tighten just enough to secure the position.
- When using the remote shutter, ensure there are no obstructions between the remote and your smartphone for optimal signal transmission.
- Always remove your camera or smartphone from the tripod head before moving the tripod to prevent accidental drops or damage.
7. Warranty and Support
The K&F Concept B174A1 Tripod comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting assistance, or warranty inquiries, please contact K&F Concept customer service through their official channels. Visit the K&F Concept Official Store for more information.