Lemorele P20

Contents

Lemorele P20 Wireless HDMI Transmitter Receiver

Model: P20 | Brand: Lemorele

1. Introduction

The Lemorele P20 Wireless HDMI Transmitter Receiver is an advanced audio and video transceiver designed to eliminate the need for cumbersome HDMI cables. This device allows you to wirelessly connect various HDMI-enabled sources, such as laptops, video cameras, set-top boxes, gaming consoles (Nintendo Switch, Xbox, PS4/5), and PCs, to large display devices like TVs, projectors, and monitors. Experience smooth, stable, and clear 1080P video and audio transmission with minimal latency.

Lemorele P20 Wireless HDMI Transmitter Receiver units
The Lemorele P20 Transmitter (TX) and Receiver (RX) units, designed for smooth, stable, and clear wireless HDMI transmission up to 50 meters.

2. Package Contents

Please check the box for the following items:

  • 1 x Lemorele P20 Transmitter (TX) Unit
  • 1 x Lemorele P20 Receiver (RX) Unit
  • 1 x User Manual (this document)
  • 2 x USB Power Cables (approx. 100cm / 39.4 inches each)
  • 1 x HDMI Extension Cable
  • 1 x HDMI Adapter
Package contents of Lemorele P20 Wireless HDMI Extender
Contents of the Lemorele P20 package, including TX/RX units, cables, and manual.

3. Specifications

Feature Specification
Model P20
Connector Type Wireless HDMI
Resolution 1080P@60HZ
Transmission Distance Up to 50 meters (164 feet) in empty space
Wireless Frequency 2.4G/5.8G Dual Band (Realtek8731BU WiFi module)
Low Latency <50 ms
Power Input 5V=2A
Multi-Transmitter Support Up to 8 Transmitters to 1 Receiver
Certifications CE, RoHS, FCC, KC
Origin Mainland China

4. Setup Instructions

Follow these steps to set up your Lemorele P20 Wireless HDMI system:

  1. Connect the Transmitter (TX) Unit:
    • Plug the TX unit directly into the HDMI output port of your source device (e.g., laptop, PC, gaming console, camera).
    • Connect one of the provided USB power cables to the TX unit's power input port and the other end to a USB power source (e.g., a free USB port on your laptop/PC, a USB wall adapter). The TX unit requires 5V=2A power.
  2. Connect the Receiver (RX) Unit:
    • Plug the RX unit directly into an available HDMI input port on your display device (e.g., TV, projector, monitor). If the port is difficult to access, use the provided HDMI extension cable.
    • Connect the second USB power cable to the RX unit's power input port and the other end to a USB power source (e.g., a free USB port on your TV/projector, a USB wall adapter). The RX unit also requires 5V=2A power.
  3. Power On Devices:
    • Ensure both your source device and display device are powered on.
    • The TX and RX units will automatically power on once connected to a power source.
  4. Automatic Pairing:
    • The TX and RX units are pre-paired from the factory. They should automatically connect within a few seconds.
    • Once connected, the video and audio from your source device will be mirrored or extended to your display device.
Connection Diagram for Lemorele P20 Wireless HDMI Extender
Connection Diagram: HDMI Input sources (Laptop, Camera, Set-top Box, PC, Switch, PS4/5) connect to the Transmitter (TX). HDMI Output displays (Projector, TV Set, Monitor, Advertising Display) connect to the Receiver (RX).
Lemorele P20 Plug & Play setup
Visual representation of the plug-and-play setup, connecting TX to a laptop and RX to a TV.

5. Operating Instructions

The Lemorele P20 is designed for simple plug-and-play operation. Once connected and powered, it will automatically transmit your display.

  • Single Transmitter to Single Receiver: This is the default mode. Simply connect and power both units, and your screen will be mirrored or extended.
  • Multi-Transmitter Mode (Up to 8 TX to 1 RX): For collaborative environments, multiple TX units can be paired with a single RX unit. To switch between active transmitters, press the button on the desired TX unit. The RX unit will automatically switch to display the signal from the active TX.
  • Display Modes: Your computer's display settings will determine whether the display is mirrored (duplicated) or extended. Adjust these settings on your source device as needed.
Lemorele P20 in a classroom setting, showing 50M transmission distance
The P20 supports transmission up to 50 meters (164 feet) in open spaces, ideal for large rooms.
Lemorele P20 used for live streaming with a camera and laptop
The P20 can be used for direct video transmission for live streaming applications.
Demonstration video of the Lemorele P20 Wireless HDMI Transmitter Receiver in action.

6. Maintenance

To ensure the longevity and optimal performance of your Lemorele P20:

  • Cleaning: Use a soft, dry cloth to clean the units. Do not use liquid cleaners or aerosols.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Ventilation: The units feature cooling hole designs to prevent overheating. Ensure these holes are not obstructed during use.
  • Power Supply: Always use the provided USB power cables and ensure the power source meets the 5V=2A requirement.
Lemorele P20 with cooling hole designs
The P20 units are designed with cooling holes to dissipate heat during extended use.

7. Troubleshooting

If you encounter issues with your Lemorele P20, try the following solutions:

  • No Signal/Black Screen:
    • Ensure both TX and RX units are properly connected to their respective HDMI ports and are receiving adequate power (5V=2A).
    • Verify that your display device is set to the correct HDMI input source.
    • Try restarting both the source device and the display device.
    • Ensure the distance between TX and RX is within 50 meters and there are no significant obstructions.
  • Video Delay or Poor Quality:
    • Reduce the distance between the TX and RX units.
    • Minimize obstructions (walls, furniture) between the units.
    • Ensure there are no strong Wi-Fi or other wireless interference sources nearby.
    • Check if the TX and RX units are overheating. Ensure proper ventilation.
  • Units Feel Warm:
    • It is normal for the units to feel warm during operation due to power consumption and data processing. However, if they feel excessively hot, ensure they have proper ventilation and are not covered.
  • Audio Issues:
    • Check audio settings on your source device and display device.
    • Ensure cables are securely connected.

8. User Tips

  • Power Source is Key: Always ensure both the Transmitter (TX) and Receiver (RX) units are connected to a stable 5V=2A power source. A dedicated USB wall adapter is often more reliable than a USB port on a TV or laptop, especially if the port provides less than 2A.
  • Optimal Placement: For best performance, try to place the TX and RX units in a line of sight with minimal physical obstructions. While it works through walls, direct line of sight will yield the most stable connection and lowest latency.
  • Consider Your Environment: Wireless performance can be affected by other wireless devices (routers, cordless phones) and structural elements. If you experience issues, try adjusting the placement of your units.
  • HDMI Extension Cable: Utilize the included HDMI extension cable if your device's HDMI port is in a tight spot or if the unit's size obstructs other ports.
  • Multi-Transmitter Use: When using multiple transmitters with one receiver, remember to press the button on the desired TX unit to switch the active display.

9. Warranty and Support

Lemorele products are designed for reliability and performance. For detailed warranty information, please refer to the official Lemorele website or contact your retailer.

For technical assistance or any questions regarding your P20 Wireless HDMI Transmitter Receiver, please contact Lemorele customer support. You can often find contact details on the product packaging or the official website.

A digital version of this user manual is available for download. You can access it via the following link: Lemorele P20 User Manual (PDF)


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.