Lemorele R1000

Contents

Lemorele R1000 Wireless HDMI Transmitter Receiver User Manual

Seamless Wireless Screen Sharing and Audio Transmission

1. Product Overview

The Lemorele R1000 is a wireless HDMI transmitter and receiver system designed for high-definition video and audio transmission. It supports 1080P@60Hz resolution with low latency, making it ideal for various applications including meetings, presentations, live streaming, video production, and home entertainment.

Lemorele R1000 Wireless HDMI Transmitter Receiver units
Lemorele R1000 Wireless HDMI Transmitter and Receiver units.
Product overview video demonstrating features and applications.

2. Package Contents

The contents of your package will vary depending on the configuration purchased. Please verify all components upon unboxing.

2.1 Standard Package (1 Transmitter, 1 Receiver)

Package contents for 1 TX and 1 RX
Package contents for the R1000 (1 Transmitter, 1 Receiver) configuration.
  • Transmitter (TX) x 1
  • Receiver (RX) x 1
  • Antenna x 2
  • User Manual x 1
  • HDMI Adapter x 1
  • 100cm USB C Cable x 2

2.2 Other Configurations

The R1000 system supports multiple receiver setups. Below are the typical contents for other configurations:

  • Only RX: Receiver x 1, Antenna x 1, User Manual x 1, HDMI Adapter x 1, 100cm USB C Cable x 1. Note: An 'Only RX' unit cannot function independently and requires a Transmitter (TX) unit to operate.
    Only RX unit with warning
    The 'Only RX' unit requires a separate Transmitter to function.
  • TX and 2 RX (R1010): Transmitter x 1, Receiver x 2, Antenna x 3, User Manual x 1, HDMI Adapter x 2, 100cm USB C Cable x 3.
    Package contents for 1 TX and 2 RX
    Package contents for the R1010 (1 Transmitter, 2 Receivers) configuration.
  • TX and 3 RX (R1030): Transmitter x 1, Receiver x 3, Antenna x 4, User Manual x 1, HDMI Adapter x 3, 100cm USB C Cable x 4.
    Package contents for 1 TX and 3 RX
    Package contents for the R1030 (1 Transmitter, 3 Receivers) configuration.
  • TX and 4 RX (R1040): Transmitter x 1, Receiver x 4, Antenna x 5, User Manual x 1, HDMI Adapter x 4, 100cm USB C Cable x 5.
    Package contents for 1 TX and 4 RX
    Package contents for the R1040 (1 Transmitter, 4 Receivers) configuration.

3. Setup Instructions

The Lemorele R1000 system is designed for plug-and-play convenience, minimizing complex wiring and configuration.

  1. Connect the Transmitter (TX): Plug the Transmitter unit into the HDMI port of your source device (e.g., laptop, camera, game console). Ensure the TX unit is powered, typically via a USB-C cable connected to a 5V2A power adapter or a powered USB port on your source device.
  2. Connect the Receiver (RX): Plug the Receiver unit into the HDMI input port of your display device (e.g., TV, projector, monitor, interactive whiteboard). Ensure the RX unit is powered, typically via a USB-C cable connected to a 5V2A power adapter or a powered USB port on your display device.
  3. Power On: Turn on both your source device and display device.
  4. Automatic Connection: The system should automatically establish a connection within 5-10 seconds. The indicator lights on both units will confirm a successful connection.

3.1 Important Power Supply Note

To ensure optimal performance, always use a 5V2A power supply for both the Transmitter and Receiver units.

Insufficient power can lead to various issues, including:

  • Unsuccessful screen casting
  • Connection lags or instability
  • Sudden disconnections
  • Display interface not showing SSD and password

3.2 Pairing Additional Receivers (or Re-pairing)

If you purchase additional Receiver units separately or need to re-pair an existing one, follow these steps:

Pairing process for additional receivers
Step-by-step guide for pairing additional Receiver units.
  1. Receiver Pairing Mode: Press and hold the receiver's function button for over 5 seconds. A prompt will appear on the interface (if connected to a display) indicating it's ready to pair. Release the button.
  2. Transmitter Pairing Mode: Next, press and hold the transmitter's function button for over 5 seconds.
  3. Confirm Connection: The indicator light on the receiver will flash rapidly to indicate that pairing has started. Wait for the transmitter's indicator light to remain steady, confirming a successful connection.

4. Operating Instructions

4.1 Wireless Screen Casting

The R1000 system enables wireless screen casting from your source device to one or multiple displays.

1 TX supports up to 4 RXs in a meeting room
Example of 1 Transmitter supporting up to 4 Receivers in a meeting room setup.
Wireless screen casting from laptop to large screen
Wireless screen casting from a laptop to a large display for presentations.
Wireless streaming from living room to outdoor projector
Enjoy wireless streaming from your living room player to an outdoor patio projector.

4.2 APP Monitoring (TuTuPlay)

The system supports real-time monitoring via the TuTuPlay app, available for Android and iOS devices.

APP Monitoring with TuTuPlay
Monitor your video feed on a smartphone or tablet using the TuTuPlay app.
Multiple people monitoring a shooting session
Multiple users can monitor a video feed simultaneously during a shooting session.

Download the TuTuPlay app from your device's app store to enable monitoring on your smartphone or tablet. Note that when only one app is connected, the maximum transmission range is 100 meters.

4.3 Multi-Scenario Applications

The R1000 is versatile for various professional and personal uses:

  • Live Streaming & Video Production: Connect to cameras for wireless monitoring.
  • Meetings & Presentations: Share screens wirelessly in conference rooms.
  • Education: Project content to multiple screens in classrooms.
  • Gaming: Use an iPad as a secondary monitor for devices like Nintendo Switch.
  • Medical: Eliminate wires for video transmission in clinical settings.
Using iPad as a Switch Monitor
Utilize an iPad as a portable monitor for gaming consoles like the Nintendo Switch.
Eliminate wires with wireless video transmission in a dental office
Wireless video transmission can eliminate clutter in professional environments like dental offices.
Live monitoring during a sports event
The low latency and range make it suitable for live monitoring during events.

5. Maintenance

To ensure the longevity and optimal performance of your Lemorele R1000 Wireless HDMI system, follow these maintenance guidelines:

  • Keep Dry: Avoid exposing the devices to moisture, rain, or liquids.
  • Clean Gently: Use a soft, dry cloth to clean the exterior of the units. Do not use harsh chemicals or abrasive cleaners.
  • Avoid Extreme Temperatures: Store and operate the devices within recommended temperature ranges. Extreme heat or cold can damage internal components.
  • Handle with Care: Avoid dropping or subjecting the units to strong impacts.
  • Proper Storage: When not in use for extended periods, store the devices in a cool, dry place, away from direct sunlight.

6. Troubleshooting

If you encounter issues with your R1000 system, refer to the following common problems and solutions:

6.1 Connection Issues

  • No Signal / Unsuccessful Screen Casting:
      - Ensure both TX and RX units are properly connected to their respective devices and powered by a 5V2A adapter.
      - Verify that the HDMI cables and adapters are securely connected.
      - Check if the display device is set to the correct HDMI input source.
  • Lags, Stuttering, or Sudden Disconnections:
      - This is often caused by insufficient power. Ensure both TX and RX units are powered by a stable 5V2A power supply.
      - Reduce the distance between the Transmitter and Receiver.
  • Display Interface Not Showing SSD and Password:
      - This indicates a power issue. Ensure a 5V2A power supply is used.

6.2 Pairing Issues (for additional RX units)

  • If an additional RX unit is not connecting, ensure you follow the pairing steps outlined in Section 3.2.
  • Confirm that both the TX and RX units are in pairing mode simultaneously.

6.3 Performance Issues

  • Reduced Transmission Range:
      - Ensure there are no significant obstructions (walls, large metal objects) between the TX and RX units.
      - Check for sources of Wi-Fi interference (other 2.4GHz/5GHz devices). The R1000 uses Adaptive Frequency Hopping to mitigate this, but extreme interference can still affect performance.
      - The transmission range varies based on the number of connected receivers (see Specifications).
  • High Latency:
      - While the R1000 boasts low latency (<50ms), external factors or insufficient power can increase it. Ensure a stable 5V2A power supply.
      - For gaming, ensure your source device and display are optimized for low latency.

7. Specifications

FeatureDescription
ModelR1000 Series
BrandLemorele
Connector TypeWireless HDMI
Resolution1080P@60Hz
Latency< 50ms
Wireless Technology2.4/5G Dual-band Wi-Fi, Adaptive Frequency Hopping
Max Receivers1 Transmitter supports up to 4 Receivers
Transmission Range (1 TX to 1 RX)200 meters / 656 feet
Transmission Range (1 TX to 2 RX)130 meters / 426 feet
Transmission Range (1 TX to 3/4 RX)100 meters / 328 feet
APP MonitoringTuTuPlay (Android & iOS)
Power Input5V2A (USB-C)
Housing MaterialTitanium Alloy
CertificationEPA
Product Dimensions (TX/RX)8.7cm x 3cm (approx.)
Package Dimensions18cm (L) x 12cm (W) x 2cm (H)
Package Weight0.126 kg
Transmission range and low latency details
Visual representation of 200M transmission range and 50ms low latency.
2.4/5G Dual-band Wi-Fi and Adaptive Frequency Hopping
The R1000 features 2.4/5G Dual-band Wi-Fi with Adaptive Frequency Hopping for stable connections.
Intelligent Channel Scanning
Intelligent Channel Scanning automatically selects the clearest channel for reliable transmission.

8. User Tips

  • Optimal Power: Always use a 5V2A power adapter for both the transmitter and receiver to prevent connection issues and ensure stable performance.
  • Receiver Dependency: Remember that a standalone Receiver (RX) unit cannot function without a Transmitter (TX) unit. Ensure you have a complete TX/RX pair for operation.
  • Gaming Latency: While the device offers low latency, for competitive gaming, a direct wired connection is always recommended for absolute minimal delay. However, for casual gaming or using an iPad as a monitor, the R1000 provides a good wireless experience.
  • Distance Considerations: Be mindful of the transmission range, especially when using multiple receivers. The range decreases as more receivers are connected.
  • Environmental Factors: Wireless performance can be affected by physical obstructions (walls, furniture) and electromagnetic interference. Try to minimize these for the best experience.

9. Warranty and Support

The Lemorele R1000 Wireless HDMI Transmitter Receiver is covered by a manufacturer's warranty. For specific warranty terms, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official Lemorele website.

© 2023 Lemorele. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.