Aigo GM700

Contents

Aigo GM700 700W 80 PLUS Gold Full Modular ATX Power Supply

User Instruction Manual

1. Introduction

Thank you for choosing the Aigo GM700 700W 80 PLUS Gold Full Modular ATX Power Supply. This power supply unit (PSU) is designed to provide stable and efficient power to your computer system, featuring high efficiency, quiet operation, and comprehensive protection mechanisms. This manual will guide you through the installation, operation, and maintenance of your new power supply.

2. Safety Instructions

  • Always disconnect the power cord from the wall outlet before installing or removing the power supply or any other components.
  • Do not open the power supply casing. High voltages are present inside, and opening it will void your warranty and pose a risk of electric shock.
  • Ensure the power supply is installed in a well-ventilated area. Do not block the fan or ventilation openings.
  • Use only the modular cables provided with this power supply. Using incompatible cables may damage the PSU and connected components.
  • This product is designed for indoor use only. Do not expose it to moisture or extreme temperatures.

3. Package Contents

Please check the package contents upon unboxing:

  • 1 x Aigo GM700 Power Supply Unit
  • 1 x AC Power Cord
  • 1 x Set of Modular Power Supply Cables
  • 1 x Installation Instruction Manual
  • 1 x Quality Certificate
Aigo GM700 Power Supply with all modular cables laid out
Figure 3.1: Aigo GM700 Power Supply and included modular cables.

4. Key Features

  • 80 PLUS Gold Certified: Delivers up to 90% efficiency, reducing heat and operating costs.
  • Full Modular Design: Allows for cleaner cable management and improved airflow within your PC case.
  • Ultra-Quiet Cooling: Equipped with a 140mm hydraulic bearing PWM fan for superior cooling performance and near-silent operation.
  • High-Quality Components: Features 100% high-quality 105°C Japanese capacitors for enhanced stability, durability, and reliability.
  • Advanced Cable Platform: Daughterboards are directly soldered to the motherboard for better heat dissipation and impressive output power quality.
  • Low Ripple Noise: Less than 30 mV ripple ensures excellent performance and protects critical components.
  • Strict Voltage Regulation: Less than 2% voltage regulation for major rails, exceeding Intel's standard 5%.
  • High Amperage Single +12V Rail: Ensures a stable and reliable power supply to all PC components, especially high-end graphics cards.
  • Comprehensive Industrial Protections: Includes Under Voltage Protection (UVP), Over Voltage Protection (OVP), Short Circuit Protection (SCP), Over Power Protection (OPP), Over Temperature Protection (OTP), and Over Current Protection (OCP).

5. Setup and Installation

Follow these steps to install your Aigo GM700 power supply:

  1. Prepare Your System: Ensure your computer is completely powered off and unplugged from the wall outlet. Open your PC case.
  2. Remove Old PSU (if applicable): Disconnect all cables from your old power supply and remove it from the case.
  3. Install New PSU: Carefully place the Aigo GM700 into the power supply bay of your PC case. Secure it with the provided screws. Ensure the fan is facing the correct direction for optimal airflow (usually facing down if there's a bottom vent, or up if not).
  4. Connect Modular Cables: Identify the necessary cables for your motherboard, CPU, graphics card(s), and storage devices. Connect them to the corresponding ports on the power supply. Refer to the diagram below for port identification.
Diagram showing modular cable connection ports on the PSU
Figure 5.1: Modular cable connection ports on the Aigo GM700 PSU.
  1. Connect to Components: Route the modular cables neatly through your case and connect them to your motherboard (20+4 Pin ATX, 8-pin + 4-pin CPU), graphics card(s) (PCI-E 6+2 Pin), SATA devices, and any other peripherals.
Diagram showing various cable types and their lengths
Figure 5.2: Illustration of various cable types and their approximate lengths for routing.
  1. Cable Management: Utilize the full modular design to manage cables efficiently, improving airflow and aesthetics.
  2. Close Case and Power On: Once all connections are secure, close your PC case, plug in the AC power cord, and flip the power switch on the PSU to the 'ON' position. You can now power on your computer.

6. Operating the Power Supply

The Aigo GM700 power supply operates automatically once installed correctly. There are no specific user controls beyond the main power switch on the unit itself.

  • Power On/Off: Use the rocker switch on the back of the power supply to turn the unit on or off. For normal operation, keep it in the 'ON' position.
  • Fan Operation: The 140mm PWM fan will adjust its speed based on the power supply's temperature and load, ensuring optimal cooling while maintaining quiet operation.

7. Maintenance

Proper maintenance ensures the longevity and optimal performance of your power supply:

  • Dust Cleaning: Periodically clean the exterior of the power supply and its fan grille to prevent dust buildup. Use compressed air to gently clear dust from the fan blades and heatsinks. Ensure the power supply is off and unplugged before cleaning.
  • Cable Inspection: Occasionally check all modular cable connections to ensure they are securely seated.
  • Environment: Operate the power supply in a clean, dry, and well-ventilated environment to prevent overheating and dust accumulation.
Close-up of the 140mm hydraulic bearing fan
Figure 7.1: The 140mm hydraulic bearing fan for quiet and efficient cooling.

8. Troubleshooting

If you encounter issues with your power supply, try the following steps:

  • No Power:
    • Ensure the AC power cord is securely plugged into both the wall outlet and the PSU.
    • Check that the power switch on the back of the PSU is in the 'ON' position.
    • Verify all modular cables are correctly and firmly connected to the PSU and your components.
    • Test the wall outlet with another device to ensure it has power.
  • System Instability/Crashes:
    • This could indicate insufficient power or a faulty component. Ensure your system's power requirements do not exceed the PSU's rated capacity.
    • Check for proper ventilation within your PC case to prevent overheating.
    • If you recently added new hardware, ensure the PSU can handle the increased load.
  • Loud Fan Noise:
    • While the GM700 features a quiet fan, excessive noise might indicate dust buildup. Clean the fan and grille as described in the Maintenance section.
    • If the noise persists and is unusual, contact support.

If these steps do not resolve your issue, please contact Aigo customer support.

9. Specifications

FeatureSpecification
ModelGM700
Power Supply Size (L x W x H)160mm x 150mm x 86mm
Power StandardATX 12V
CPU CompatibilityAMD, Intel
PFC TypeActive PFC
Rated Power700W
Maximum Power750W
Efficiency90% (80 PLUS Gold Certified)
Input Voltage100V-240V
Output Current (+3.3V)20A
Output Current (+5V)15A
Output Current (+12V1)48A
Output Current (-12V)0.3A
Output Current (+5Vsb)2.5A
Wide Voltage SupportYes
Temperature ControlPWM
CertificationsCB, CCC, FCC, CE, ROHS
Product Weight2860g
Number of SATA Ports6
Graphics Card 12V Pin Number4 x 8-pin + 4 x 6-pin
D-type Bus Number4
CPU Power Connector8-pin + 4-pin
Main Interface Type20 + 4Pin
ModularFull Modular
Power Cable Length1.5M
Dimensions of the Aigo GM700 power supply
Figure 9.1: Physical dimensions of the Aigo GM700 power supply.

10. User Tips

  • When building a new PC or upgrading, always calculate your total system wattage to ensure the 700W capacity is sufficient for all your components, especially high-power CPUs and GPUs.
  • Take advantage of the full modular design to only connect the cables you need. This significantly improves cable management and airflow inside your PC case.
  • For optimal cooling and quiet operation, ensure the PSU fan is not obstructed. If your case has a bottom intake, orient the PSU with the fan facing down.

11. Warranty and Support

The Aigo GM700 Power Supply comes with a 3-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

Image indicating a three-year warranty for the product
Figure 11.1: The Aigo GM700 Power Supply is backed by a 3-year warranty.

The warranty does not cover:

  • Damage caused by accident, abuse, misuse, flood, fire, earthquake, or other external causes.
  • Damage caused by operating the product outside the permitted or intended uses described by Aigo.
  • Damage caused by service (including upgrades and expansions) performed by anyone who is not a representative of Aigo.
  • Products or parts that have been modified to alter functionality or capability without the written permission of Aigo.

For warranty claims or technical support, please contact the Aigo Official Store or your point of purchase. Please have your proof of purchase and product serial number ready.

© 2024 Aigo Official Store. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.