1. Product Overview
The BAFANG DPC11 is an intelligent LCD display designed for electric bicycle conversion kits, compatible with 24V, 36V, and 48V power supplies. It provides essential riding information and control over your e-bike system.
Note: This is a customized product. Please contact the seller immediately after placing your order to provide any necessary information for customization.
2. Specifications
| Feature | Description |
|---|---|
| Product Name | E-bike Intelligent LCD Display |
| Model | BAFANG DPC11 |
| Type | Display |
| Power Supply | 24V / 36V / 48V |
| Rated Working Current | 10mA |
| Maximum Working Current | 30mA |
| Off-state Leakage Current | <1μA |
| Working Temperature | -20℃ ~ 60℃ |
| Storage Temperature | -30℃ ~ 70℃ |
| Origin | Mainland China |
3. Setup and Installation
Follow these steps to properly install your BAFANG DPC11 display on your e-bike.
- Mounting the Display:
Secure the display to your bicycle handlebar using the provided mounting bracket. Ensure it is positioned for optimal visibility and accessibility while riding. The bracket typically clamps around the handlebar, and the display slides into place. - Connecting the Cables:
Connect the display's waterproof cable to the corresponding port on your e-bike's controller or wiring harness. Ensure the connectors are aligned correctly and push firmly until they click into place. The DPC11 uses a waterproof 5-pin connector. - Initial Power-Up:
After installation, ensure all connections are secure. Power on your e-bike system. The display should illuminate and show initial readings.
4. Operating Instructions
The BAFANG DPC11 display provides real-time information and allows control over various e-bike functions.
4.1 Power On/Off
- To power on the display and your e-bike system, press and hold the power button located on the side of the display.
- To power off, press and hold the same power button until the display shuts down.
4.2 Display Information
Once powered on, the display will show key riding metrics:
- Battery Level: An icon indicates the current charge level of your e-bike battery.
- Current Speed: Displays your real-time speed, typically in kilometers per hour (km/h).
- Odometer (ODO): Shows the total distance traveled by the e-bike.
4.3 Button Functions
The two buttons located below the screen are used for navigation and adjusting settings:
- Up/Plus Button (+): Typically used to increase assist levels, scroll up through menus, or increase values.
- Down/Minus Button (-): Typically used to decrease assist levels, scroll down through menus, or decrease values.
- Specific functions may vary based on the e-bike controller's programming. Refer to your e-bike's main controller manual for detailed button operations.
5. Maintenance
Proper maintenance ensures the longevity and optimal performance of your DPC11 display.
- Cleaning: Use a soft, damp cloth to clean the display screen. Avoid abrasive cleaners or solvents that could damage the screen or casing.
- Protection: While the display features a waterproof cable, avoid submerging the unit in water. Protect it from direct, prolonged exposure to heavy rain or extreme weather conditions.
- Cable Inspection: Periodically check the cables and connectors for any signs of wear, damage, or corrosion. Ensure they remain securely connected.
- Storage: When not in use for extended periods, store the e-bike and display in a dry, temperate environment.
6. Troubleshooting
If you encounter issues with your DPC11 display, try the following basic troubleshooting steps:
- Display Not Turning On:
- Check if the e-bike battery is charged and properly connected.
- Ensure all cable connections between the display and the controller are secure.
- Verify the power button is being pressed and held correctly.
- Incorrect Readings:
- If speed or distance readings are inaccurate, check the speed sensor and its magnet for proper alignment and connection.
- Ensure the wheel size setting in your e-bike controller (if adjustable) is correct.
- Intermittent Operation:
- Inspect all wiring for loose connections or damage.
- Ensure the display is firmly seated in its mount.
If problems persist after these steps, please contact the seller or a qualified e-bike technician for further assistance.
7. User Tips
- Always ensure your e-bike's battery is adequately charged before a ride to prevent unexpected power loss to the display and motor.
- Familiarize yourself with the display's button functions before riding, especially for adjusting assist levels, to maintain focus on the road.
- Keep the display screen clean for clear visibility of your riding data.
8. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller directly through your purchase platform. Provide your order details and a clear description of the issue to facilitate a quicker resolution.
