ANDELI Tig-205 Pro

Contents

ANDELI LCD Smart Tig-205 Pro 9-in-1 Welding Machine User Manual

Model: Tig-205 Pro (also referred to as TIG-250 Pro in some documentation)

1. Introduction

The ANDELI LCD Smart Tig-205 Pro is a versatile 9-in-1 welding machine designed for a wide range of welding applications. It supports AC DC TIG, AC DC PULSE, MMA, and Cold Welding, making it suitable for various materials including carbon steel, stainless steel, aluminum, and titanium. This manual provides essential information for the safe and effective use of your welding machine.

2. Safety Precautions

Always prioritize safety when operating welding equipment. Failure to follow safety guidelines can result in serious injury or death.

  • Ensure proper ventilation to avoid inhaling welding fumes.
  • Wear appropriate personal protective equipment (PPE), including welding helmet, gloves, and protective clothing.
  • Ensure the machine is properly grounded.
  • Do not operate in wet conditions.
  • Keep children and unauthorized personnel away from the welding area.
  • The machine is equipped with safety features such as VDR (Voltage Reduction Device), over voltage, over load, overheating, and over current protection. However, these do not replace safe operating practices.

3. Package Contents

Verify that all items are present in your package:

  • ANDELI LCD Smart Tig-205 Pro Welding Machine
  • Ground Clamp (2 meters)
  • TIG Torch WP-26 (4 meters)
  • Gas Pipe (3 meters)
  • Hose Clamps (2 pcs)
  • Collets (20 pcs)
  • Nozzles (20 pcs)
  • Tungsten Electrodes (30 pcs)
  • Foot Pedal (2 pcs)
  • Pyrex Cup Kit (49 pcs)
  • WP-9F 4M Torch (4 meters)
ANDELI Tig-205 Pro welding machine with included accessories: ground clamp, TIG torch, gas pipe, hose clamps, collets, nozzles, tungsten electrodes, foot pedal, and pyrex cup kit.
Figure 1: ANDELI Tig-205 Pro welding machine and included accessories.

4. Setup

Follow these steps to set up your welding machine:

  1. Placement: Place the welding machine on a stable, level surface in a well-ventilated area. Ensure adequate clearance around the machine for cooling.
  2. Power Connection: Connect the machine to a suitable 110V or 220V power supply. The machine automatically adapts to the input voltage.
  3. Ground Clamp Connection: Attach the ground clamp cable to the designated terminal on the machine and securely clamp it to the workpiece or welding table.
  4. TIG Torch Connection: Connect the TIG torch to the appropriate gas and power connections on the front panel.
  5. Gas Supply Connection: Connect the gas pipe from your shielding gas cylinder (e.g., Argon) to the machine's gas inlet. Ensure all connections are tight to prevent leaks.
  6. Foot Pedal Connection (Optional): If using a foot pedal for current control, connect it to the designated port.
Front view of the ANDELI Tig-205 Pro welding machine, highlighting the LCD screen and control knobs.
Figure 2: Front panel connections of the welding machine.
Video 1: Product overview and demonstration of the ANDELI Tig-205 Pro welding machine, including its LCD display and various welding modes.

5. Operating Instructions

The Tig-205 Pro features an intuitive LCD display and multiple welding modes.

5.1. LCD Display and Controls

The high-definition LCD display provides a graphical interface for easy parameter adjustment. Use the L-KNOB and R-KNOB to navigate and adjust settings.

Close-up of the LCD display on the ANDELI Tig-205 Pro, showing waveform selection, pulse settings, gas control, and 2T/4T selection.
Figure 3: LCD High-definition Display with control options.

Key display functions include:

  • Waveform Selection: Choose between various AC waveforms (Sine, Square, Trapezoidal) for different materials and desired weld characteristics.
  • Pulse ON/OFF: Activate or deactivate the pulse function for better control and reduced heat input.
  • PRE/POST GAS: Adjust pre-flow and post-flow gas times to protect the weld puddle and electrode from atmospheric contamination, especially crucial for aluminum to avoid oxidation.
  • START/STOP CURRENT: Control the initial and final current settings for smooth arc initiation and crater filling.
  • 2T/4T Selection: Choose between 2-stroke (press and hold for welding) and 4-stroke (press to start, press to stop) trigger modes.
  • Balance: Adjust the AC balance for cleaning action on aluminum.
  • Channel Storage: The machine offers 6 channels to save and recall your preferred welding settings.
Detailed view of the 3.7-inch digital display screen with graphical interface for easier use, showing welding parameters like voltage, amperage, and pulse settings.
Figure 4: Digital display screen showing welding parameters.

5.2. Welding Modes

The Tig-205 Pro offers 9-in-1 versatile selection:

  • AC TIG: For aluminum and magnesium alloys.
  • DC TIG: For stainless steel, carbon steel, copper, titanium, etc.
  • Pulse TIG (AC/DC): Provides better control over heat input, ideal for thin materials and achieving a more aesthetically pleasing weld bead.
  • Cold Welding: Specifically designed for extremely thin sheets (0.3-1mm), minimizing heat distortion.
  • MMA (Stick Welding): For general-purpose welding with coated electrodes.
Diagram illustrating the nine versatile welding modes available on the ANDELI Tig-205 Pro, including TIG AC Pulse Sine, TIG AC Square, TIG AC Trapezoidal, TIG AC Sine, TIG AC Square, TIG AC Pulse Square, TIG DC Pulse, TIG DC, and MMA.
Figure 5: 9-in-1 Versatile Welding Modes.
Collage of images showing real welding effects for AC-TIG for AL, DC-TIG, Cold-TIG, and MMA, demonstrating the machine's versatility.
Figure 6: Real welding effects for various modes.

5.3. Welding Thickness Guidelines

  • Aluminium Welding: 0.5-5mm
  • Cold Welding: 0.3-1mm
  • TIG Welding (General): 0.8-8mm

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your welding machine.

  • Cleaning: Periodically clean the exterior of the machine with a dry cloth. Ensure cooling vents are free from dust and debris.
  • Cable Inspection: Regularly inspect all welding cables, torches, and ground clamps for damage, fraying, or loose connections. Replace damaged components immediately.
  • Gas Connections: Check gas hoses and connections for leaks.
  • Internal Cooling: The machine features a complete cooling system to ensure steady power output. Keep the machine in an environment that allows for proper airflow.
Internal view of the ANDELI Tig-205 Pro welding machine, showing the complete cooling system and highlighting safety features like VDR, over voltage, over load, overheating, and over current protection.
Figure 7: Internal cooling system for reliable operation.

7. Troubleshooting

If you encounter issues with your welding machine, consider the following general troubleshooting steps:

  • No Power: Check the power cable, circuit breaker, and ensure the machine is properly plugged into a live outlet.
  • No Arc: Verify ground clamp connection, check TIG torch consumables (tungsten, collet, nozzle), ensure gas flow, and confirm correct welding mode and parameters are selected.
  • Poor Weld Quality: Adjust welding parameters (current, voltage, pulse settings, AC balance), check gas flow and purity, ensure proper tungsten preparation, and clean the workpiece thoroughly.
  • Overheating Indicator: If the overheating protection activates, allow the machine to cool down. Ensure proper ventilation and that cooling vents are not blocked.

For persistent issues or complex problems, please contact the customer service team for free guidance.

8. Specifications

The following table details the technical specifications of the ANDELI LCD Smart Tig-205 Pro welding machine:

Detailed specification table for the TIG-250 Pro AC/DC welding machine, listing functions, power supply, frequency, efficiency, voltage, current ranges, duty cycle, times, AC frequency, clean pulse width, welding thickness, and other features.
Figure 8: Detailed Specification Table.
ANDELI Tig-205 Pro (TIG-250 Pro) Key Specifications
FeatureSpecification
ModelTig-205 Pro (TIG-250 Pro)
Functionality9-in-1: AC DC TIG, AC DC PULSE, MMA, Cold Welding
Rated Input Voltage110V / 220V (Auto-sensing)
Rated Output Current200A
Output PolarityAC DC TIG
Rated Duty Cycle @40°C (TIG)60%
Max. Load Power Capacity10 kVA
Pulse Frequency50/60Hz
Welding Thickness (Aluminium)0.5-5mm
Welding Thickness (Cold Welding)0.3-1mm
Welding Thickness (TIG General)0.8-8mm
Material / Metal ProcessedCarbon Steel, Stainless Steel, Aluminium alloy, Titanium
FeatureINVERTER, Easy to Operate
Weight (KG)12.5 kg (Net) / 27.1 kg (Package)
Dimensions (MM)485x210x340 (Net) / 590x300x560 (Package)
CertificationCE

9. Warranty and Support

The ANDELI LCD Smart Tig-205 Pro welding machine comes with a two-year warranty and free replacement parts. If you encounter any issues or require technical assistance, please contact our efficient customer service team for free guidance.

10. User Tips

  • For Beginners: This machine is designed to be easy to operate, even for beginners. Start with lower amperage settings and practice on scrap material to get a feel for the controls and different welding modes.
  • Aluminum Welding: When welding aluminum, ensure your AC balance is correctly set to achieve the desired cleaning action and penetration. Utilize the PRE/POST GAS function to prevent oxidation.
  • Thin Sheet Welding: For very thin materials, the Cold Welding mode is highly effective in minimizing heat input and distortion.
  • Parameter Storage: Take advantage of the 6 channel storage feature to save your frequently used settings for different materials and applications, saving time during setup.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.