1. Safety Notes
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
There are no user-serviceable parts inside this unit. Please refer servicing to qualified technical personnel.

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Safe use only under elevation 2000m.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
To completely disconnect power to this unit, unplug the power cord from the wall outlet. The power plug is used to completely interrupt the power supply to the machine.
2. Features
- Classical FET Class A amplifier circuit.
- All-aluminum CNC shell for aesthetics and enhanced heat dissipation.
- Pre-amp adopts parallel regulator power supply.
- Utilizes low distortion, high precision volume control chip PGA2311 (from Texas Instruments).
- Headphone amplifier features 2 gears of gain control.
- Custom low-noise toroidal transformer manufactured by Noratel, UK.
- Internal temperature display for better sound quality control.
- High quality audio sockets imported from Japan.
- Extensive use of audiophile-grade components, including nichicon KG capacitors.
- Complete protection circuitry for speakers and headphones (overheating, overcurrent).
- Color high-resolution display.
- Next-generation GaN power transistors from Infineon Germany, operating at switching frequencies up to 1MHz, reducing dead time from 35ns to 15ns for ultra-clean signal transmission and reduced distortion.
3. Product Overview
3.1. Main Unit Front Panel

Front view of the VMV A1 PRO amplifier.
- Multi-function knob
- LED indicator
- Display screen
- Output source select knob
- Remote window
- Mute button
3.2. Main Unit Rear Panel

Rear view of the VMV A1 PRO amplifier showing connections.
- Unbalanced input (RCA)
- Headphone output (6.35mm jack)
- Right speaker output (Banana connector)
- Left speaker output (Banana connector)
- AC power input (100-240V AC)
4. Setup Guide
4.1. Connecting Audio Sources
- RCA Input: Connect your audio source (e.g., CD player, DAC) to the "LINE IN" RCA jacks (7) on the rear panel. Ensure left (L) and right (R) channels are correctly matched.
- XLR (Mono) Input: For mono BTL mode, connect your audio source to the "MONO IN" XLR input (7).
4.2. Connecting Speakers/Headphones
- Speakers: Connect your passive speakers to the speaker terminals (9 for Right, 10 for Left) using banana connectors. Observe correct polarity (+ to + and - to -).
- Headphones: Plug your headphones into the 6.35mm headphone jack (8) on the rear panel.
4.3. Power Connection
- Connect the provided power cable to the AC power input (11) on the rear panel and then to a suitable wall outlet (100-240V AC).
Important: Ensure all connections are secure before powering on the unit.
5. Operation Instructions
5.1. Main Display Overview

Main display interface.
- Input selection indication
- Volume display
- Mute indicator (Red when muted)
- Input source name / Temperature display
5.2. Remote Control

Remote control unit.
Remote Control Battery Installation:
- Locate the battery compartment on the back of the remote.
- Turn the battery door counterclockwise until it opens.
- Remove the old battery.
- Insert a new CR2032 or BR2032 lithium 3V coin battery with the positive side facing up.
Remote Control Usage:
- Point the remote towards the remote control signal receiver (5) on the main unit.
- Effective range is within 5 meters (16 ft).
- Avoid placing obstructions between the remote and the unit.
- If the remote does not work due to direct sunlight or bright light, try moving the unit.
- Buttons: Volume Up, Menu, Switch Function, Volume Down, Input Selection, Power ON/OFF, EQ, Mute.
5.3. Settings Menu
The settings menu has three pages:
Page 1: OUTPUT

Settings menu page 1.
- OUTPUT: Selects the output (Headphones or Speakers).
- HP GAINS: Adjusts headphone gain (Low or High).
- BRIGHTNESS: Adjusts display brightness.
Page 2: OUTPUTS Selection

Outputs selection menu.
- HEADPHONES: Select for headphone output.
- SPEAKERS: Select for speaker output.
Page 3: HP GAIN Selection

Headphone gain selection menu.
- LOW: Low gain for headphones.
- HIGH: High gain for headphones.
Page 4: BRIGHTNESS Adjustment

Brightness level adjustment interface.
- Brightness Level: Adjustable from 1 to 6.
6. Specifications
| Input | RCA, XLR (Mono) |
| Output | Speaker terminal (banana connector), 6.35mm headphone jack |
| THD+N | 0.003% (Stereo), 0.008% (8Ω), 0.002% (32Ω) |
| SNR | 109dB |
| Channel Separation | 75dB |
| Input Sensitivity (RCA) | 680mV / 22kΩ |
| Input Sensitivity (XLR Mono) | 2100mV / 22kΩ |
| Output Power (Stereo 4Ω) | 160W x2 |
| Output Power (Stereo 8Ω) | 85W x2 |
| Output Power (Mono BTL 4Ω) | 400W x1 |
| Output Power (Mono BTL 8Ω) | 250W x1 |
| Standby Power Consumption | < 0.5W |
| Power Consumption (Normal Volume) | 40W |
| Dimensions (W x H x D) | 210 x 47.6 x 201.6 mm |
| Weight | 1.56 kg (3.44 lbs) |
Note: Specifications are subject to change without notice.
7. Troubleshooting
- No Power: Ensure the power cable is securely connected to both the unit and the wall outlet. Check if the power outlet is functional.
- No Sound:
- Verify that the correct input source is selected.
- Check all audio cable connections (RCA, XLR, speaker wires, headphones).
- Ensure the volume is not set to minimum or muted.
- Confirm that the correct output (Headphones or Speakers) is selected in the settings.
- Remote Control Not Working:
- Check and replace the remote control battery (CR2032/BR2032).
- Ensure there are no obstructions between the remote and the unit's remote window.
- Avoid strong direct light on the unit's remote window.
- Distorted Sound:
- Check audio cable connections for looseness or damage.
- Ensure the input source is not overdriving the amplifier.
- Verify speaker impedance matches amplifier capabilities.
If the issue persists, please contact customer support.
8. User Tips
- For optimal sound quality, allow the amplifier to warm up for a few minutes after powering on.
- Experiment with the headphone gain settings (Low/High) to match your headphones' impedance and sensitivity for the best listening experience.
- Ensure proper ventilation around the unit to maintain optimal operating temperature, especially during extended use.
9. Factory Reset
To perform a factory reset:
- Ensure the machine is powered off.
- Press and hold the power button.
- While holding the power button, connect the power cord.
- Continue holding the power button until the SMSL logo appears on the screen, then release the button.
This will restore the unit to its default factory settings.
10. Warranty and Support
10.1. Warranty Terms
Foshan Shuangmusanlin Technology Co., Ltd (SMSL) promises to offer good-quality products. The warranty terms are as follows:
- If the product is found to be broken within 7 days of purchase under normal use, you may choose to return, replace, or repair it (provided the product is in a condition that does not affect secondary sales).
- Free repair is provided for one year if the product is used normally.
- The purchase date is determined by the invoice or receipt from the seller. For online purchases, a screenshot of the transaction can serve as proof.
The warranty will be void under the following conditions:
- Damage caused by inappropriate use, including use under non-normal working environments or without following instructions.
- Dismantling, refitting, or repairing by the user without authorization.
- Damage caused by using non-designated or non-accredited fittings.
- Inability to provide credible proof of purchase.
- The product is not manufactured by SMSL.
For warranty service, please contact your S.M.S.L Audio reseller for return or replacement. This warranty clause applies to mainland China; for other regions, please refer to the regulations and national laws of the local sales agent.
10.2. User Manual PDF
A detailed user manual in PDF format is available for download. You can access it here.
11. Package Contents
The following items are included in the box:
- VMV A1 PRO Amplifier x1
- Power cable x1
- User Manual x1
- Remote control x1