DOSS SoundBox XL

Contents

DOSS SoundBox XL Bluetooth Speaker User Manual

Model: SoundBox XL

Brand: DOSS

Introduction

The DOSS SoundBox XL is a powerful 32W wireless Bluetooth home stereo speaker designed to deliver superior audio quality. Featuring dual drivers, a subwoofer, and passive radiators, it provides rich bass and clear sound. With Bluetooth 5.0 technology, broad compatibility, and a long-lasting battery, it's perfect for enhancing your audio experience at home or on the go.

DOSS SoundBox XL speaker on a table, highlighting its exquisite design.
The DOSS SoundBox XL boasts an exquisite design and superior audio performance.

Package Contents

Please check the box for the following items:

  • DOSS SoundBox XL Bluetooth Speaker
  • USB Charging Cable
  • AUX-in Cable
  • User Manual

Product Overview

Familiarize yourself with the speaker's controls and features:

DOSS SoundBox XL speaker with icons for Wireless 5.0, Bass, 32W Sound, TF & AUX IN, 2600 mAh battery.
Key features of the DOSS SoundBox XL speaker.

Control Panel (Top)

  • Power Button: Press and hold to power on/off.
  • Mode Button: Switch between Bluetooth, AUX-in, and TF card modes.
  • Bluetooth Button: Press to enter Bluetooth pairing mode.
  • Play/Pause Button: Play or pause audio.
  • Volume Down / Previous Track Button: Short press for previous track, long press to decrease volume.
  • Volume Up / Next Track Button: Short press for next track, long press to increase volume.

Ports (Rear/Side)

  • Micro USB Charging Port: For charging the speaker.
  • AUX-in Port: For wired connection to audio devices.
  • TF Card Slot: For playing music directly from a TF (MicroSD) card.

Setup

Charging the Speaker

  1. Connect the provided USB charging cable to the speaker's Micro USB port.
  2. Connect the other end of the cable to a USB power adapter (not included) or a computer's USB port.
  3. The LED indicator will show charging status (e.g., red for charging, off when fully charged).
  4. A full charge typically takes a few hours. The built-in 2600mAh battery provides up to 10 hours of playtime at 50% volume.

Powering On/Off

  • To Power On: Press and hold the Power button for a few seconds until you hear an audible prompt and the LED indicator lights up.
  • To Power Off: Press and hold the Power button for a few seconds until you hear an audible prompt and the LED indicator turns off.

Operating Instructions

Bluetooth Pairing

  1. Ensure the speaker is powered on and in Bluetooth mode. If not, press the 'Mode' button until you hear the Bluetooth prompt or see the Bluetooth LED indicator flashing.
  2. On your device (phone, tablet, TV, Echo Dot), enable Bluetooth and search for available devices.
  3. Select "DOSS SoundBox XL" from the list of devices.
  4. Once paired, you will hear a confirmation sound, and the Bluetooth LED indicator will stop flashing and remain solid.
  5. You can now play audio from your device through the speaker.
DOSS SoundBox XL speaker on a table with a smartphone showing Bluetooth pairing.
The speaker utilizes Bluetooth 5.0 technology for seamless wireless connection.

AUX-in Mode

  1. Connect one end of the 3.5mm AUX-in cable to the speaker's AUX-in port.
  2. Connect the other end of the cable to the headphone jack or audio output of your device.
  3. Press the 'Mode' button on the speaker until you hear the AUX-in prompt.
  4. Play audio from your device. The speaker will output the sound.

TF Card Mode

  1. Insert a TF (MicroSD) card with pre-loaded music files into the TF card slot on the speaker.
  2. Press the 'Mode' button on the speaker until you hear the TF card mode prompt.
  3. The speaker will automatically begin playing music from the TF card.

Wireless Stereo Pairing (TWS)

To achieve an immersive stereo sound experience, you can pair two DOSS SoundBox XL speakers together:

  1. Ensure both DOSS SoundBox XL speakers are powered on and in Bluetooth pairing mode (not connected to any device).
  2. On one of the speakers (this will be your primary speaker), press and hold the Bluetooth button for a few seconds until you hear a specific TWS pairing prompt.
  3. The two speakers will automatically search for and connect to each other. Once connected, you will hear a confirmation sound.
  4. Now, connect your device (phone, tablet, etc.) to the primary speaker via Bluetooth as described in the 'Bluetooth Pairing' section.
  5. Audio will now play in stereo across both speakers.
Two DOSS SoundBox XL speakers paired wirelessly with a laptop, illustrating Wireless Stereo Pairing.
Pair two SoundBox XL speakers for an immersive wireless stereo experience.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the speaker's surface. Do not use abrasive cleaners or solvents.
  • Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in use for extended periods.
  • Water Resistance: This speaker is NOT waterproof. Avoid exposure to water or excessive moisture.

Troubleshooting

No Power

  • Ensure the speaker is fully charged. Connect it to a power source and check the charging indicator.
  • Press and hold the Power button for a few seconds to ensure it's powered on.

No Sound

  • Check the volume levels on both the speaker and your connected device.
  • Ensure the speaker is in the correct mode (Bluetooth, AUX-in, or TF card) for your audio source.
  • If using Bluetooth, ensure the speaker is properly paired with your device.
  • If using AUX-in, ensure the cable is securely connected to both the speaker and your device.

Bluetooth Pairing Issues

  • Make sure the speaker is in Bluetooth pairing mode (LED flashing).
  • Ensure your device's Bluetooth is enabled and it's searching for devices.
  • Move the speaker closer to your device and away from potential interference sources.
  • Try unpairing/forgetting the speaker from your device's Bluetooth list and then re-pairing.
  • Restart both the speaker and your device.

TWS Pairing Issues

  • Ensure both speakers are DOSS SoundBox XL models.
  • Make sure both speakers are not connected to any other Bluetooth device before attempting TWS pairing.
  • Follow the TWS pairing steps carefully, ensuring you initiate pairing on only one speaker.

Specifications

FeatureSpecification
Brand NameDOSS
ModelSoundBox XL
Output Power32W (One Subwoofer + Two Active Drivers + Two Passive Radiators)
Bluetooth Version5.0
Battery Capacity2600mAh
PlaytimeUp to 10 hours (at 50% volume)
Input/OutputTF Card, AUX-in
Sound ModeStandard Mode
Audio CrossoverTwo-Way
Channels1 (Stereo pairing possible with two units)
Power SourceBattery, USB
Cabinet MaterialPlastic
Dimensions (L x W x H)23 cm x 16 cm x 9 cm (approximate)
Weight0.68 kg (approximate)
Diagram showing the internal components of the DOSS SoundBox XL, illustrating 32W Output Power with subwoofers, active drivers, and passive radiators.
Internal speaker configuration for 32W output power.
Detailed circuit board diagram with DSP and Bluetooth 5.0 chips, illustrating Precise Acoustic Tuning.
Dual Premium DSP technologies ensure precise acoustic tuning.

User Tips

  • For optimal sound quality, place the speaker on a stable surface and avoid obstructing the drivers.
  • When using the TF card, ensure music files are in a compatible format (e.g., MP3, WAV).
  • To maximize battery life, turn off the speaker when not in use.
  • If experiencing audio lag or drops, try moving closer to the speaker or reducing interference from other wireless devices.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official DOSS website. Keep your proof of purchase for warranty claims.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.