1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your NAVIFLY 2K QLED Android 14 Car Radio Head Unit. This universal head unit is designed to enhance your driving experience with advanced features like a high-resolution QLED screen, Android 14 operating system, wireless CarPlay and Android Auto, GPS navigation, Bluetooth 5.0, 4G LTE connectivity, and a powerful 8-core processor.
2. Package Contents
Before installation, please verify that all items listed below are included in your package. Contents may vary slightly based on the specific model (TS10/TS18 or TS7).

- Mainframe (Head Unit)
- Power Cable
- GPS Antenna
- Microphone (MIC)
- Reversing Cable
- RCA Cable (TS10/TS18 models include additional RCA cables)
- USB Cable (2x for TS10/TS18, 2x for TS7)
- 4G Antenna (for TS10/TS18 models)
3. Setup and Installation
Professional installation is highly recommended to ensure correct wiring and avoid damage to the device or your vehicle. Incorrect installation can lead to malfunctions.
3.1 Wiring Diagrams
Refer to the following diagrams for proper connection of the head unit and its accessories. Ensure all connections are secure before powering on the device.


3.2 Cooling System
The head unit is equipped with a powerful cooling fan to maintain stable operation, especially during long-term use or in high-temperature environments.

3.3 Steering Wheel Control (SWC)
The head unit supports steering wheel control, allowing you to manage music and calls hands-free for safer driving. This unit works with a digital SWC.

3.4 Optional Accessories
The head unit supports various optional accessories to expand its functionality. These are typically purchased separately.

- Rear View Camera: Supports 1080P AHD waterproof rear cameras for clear reversing vision (TS10/TS18 models support AHD).
- DVR (Driving Recorder): Provides front vehicle distance prediction, anti-collision warning, and lane departure warning.
- OBDII (On-Board Diagnostics): Connect an OBDII device to monitor real-time data and retrieve fault codes from your vehicle.
- TPMS (Tire Pressure Monitoring System): After correct installation, sensors automatically monitor tire pressure and temperature.
- DAB+ (Digital Audio Broadcasting): For enhanced radio signal quality in supported regions.
- 360° Panoramic Camera: (Only 8-Core models support 360°) Provides a 3D/2D panoramic view to improve driving experience. Note: Panoramic camera is not included and requires a built-in 360 camera in the car radio.
- Video Output: The video output function allows displaying content on headrest monitors via RCA or HDMI-compatible accessories.
4. Operating Instructions
4.1 User Interface and Navigation
The head unit runs on Android 14, offering a modern and intuitive user interface. You can customize themes and access various applications.


4.2 Connectivity
- Bluetooth 5.0: Supports phonebook search, incoming/dialed/missed calls with caller ID, and BT music streaming.
- 4G LTE + WiFi: Built-in 4G modules allow connection to cellular data networks. The unit also supports WiFi connection.
- Wireless CarPlay & Wired Android Auto: Connect your smartphone for seamless integration.



4.3 GPS Navigation
The unit features a built-in global positioning system with omni-directional map display, real-time traffic conditions, and accurate positioning. Supports various navigation apps.

4.4 Radio
Enjoy FM/AM radio with RDS (Radio Data System) functionality. Supports automatic search and manual tuning.

4.5 Multimedia Features
- Video Floating Window: Supports video and DVR applications in a floating window, allowing for customized display position.
- Split Screen: Supports two applications simultaneously on the screen for convenient multitasking.


4.6 Sound Settings (DSP Equalizer)
8-core products feature a built-in DSP (Digital Signal Processor) module for multi-dimensional surround lossless sound effects and high-definition audio. Adjustments include Bass Filter, Bass Enhancement, Field, and Surround Space.


4.7 Intelligent Voice Control
Support for voice control applications allows for hands-free operation, enhancing driving safety. This feature supports multiple languages.

4.8 Language Settings
The head unit supports multiple languages, including English, German, French, Spanish, Italian, Portuguese, Russian, Dutch, Polish, Japanese, Simplified and Traditional Chinese, Arabic, etc.

5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents.
- Software Updates: NAVIFLY provides free updates for firmware, software, UI, and GPS navigation maps. Check the manufacturer's website or contact support for the latest updates.
- General Care: Avoid exposing the unit to extreme temperatures or direct sunlight for prolonged periods. Ensure proper ventilation around the unit.
6. Troubleshooting
If you encounter any issues, please refer to the following common troubleshooting steps. If the problem persists, contact customer service.
- No Power: Check all power connections. Ensure the car's ignition is on.
- No Sound: Check speaker connections, volume levels, and audio source selection. Verify DSP settings if applicable.
- GPS Signal Loss: Ensure the GPS antenna is properly installed and has a clear view of the sky.
- Bluetooth Connectivity Issues: Ensure Bluetooth is enabled on both the head unit and your phone. Try re-pairing the devices.
- Touch Screen Unresponsive: Try restarting the device. If the issue persists, a factory reset might be necessary (note: this will erase all user data).
- System Slow/Lagging: Close unnecessary applications. Ensure sufficient storage space. A system update or factory reset may help.
7. Specifications
The following table outlines the key specifications for the NAVIFLY Car Radio Head Unit. Note that some features may vary by model (e.g., 4-Core vs. 8-Core, RAM/ROM configurations).

| Feature | Specification |
|---|---|
| Operating System | Android 14 |
| Processor | Unisoc Uls8581A, 8-Core 1.6GHz (8*Cortex A55) |
| RAM | 6G (various configurations available) |
| ROM | 128G (various configurations available) |
| Display Size | 9", 10", 9.5", 10.36" |
| Resolution | QLED 1280*720 / 2K 2000*1200 |
| Bluetooth | 5.0 |
| Out Power | 4*45W |
| Voltage | 12 V |
| Item Weight | 1.5kg |
| Max External Memory | 128G |
| Special Features | Built-In Speaker/Microphone, WiFi function, Steering wheel control, 3G/4G Network support, Can-Bus support, Built-in GPS, Charger, Mobile Phone, MP3 players, Voice Control, DSP, CarPlay, Android Auto, Reversing Input, Split Screen |
| Digital Media Format | Mp3, MP4, WMA, JPEG |
| Material | Plastic and metal |
| Certification | CE |
| Preset Station | Yes |
| Built-in DVD Player | No |
| Built-in CD player | No |
| Is touch screen | Yes |
| Built-in Screen | Yes |
| TF/Micro SD Slot | 1 |
| Din | Double Din |
| Interface | Plug and play |
| Accessory Type | Plug and play |
| High-concerned chemical | None |
8. Warranty and Support
NAVIFLY products come with a 1-year factory warranty (accessories not included). We are committed to providing innovative hardware and software. We offer free updates for firmware, software, UI, and GPS navigation maps. For any issues or support, please contact customer service.
If the product has a problem within 365 days after receipt confirmation, support for free return and refund within 15 days is available. Alternatively, a new machine replacement can be provided. Please contact customer service first to communicate any issues.
9. User Tips
- Professional Installation: Always opt for professional installation to ensure correct wiring and prevent damage.
- Software Updates: Regularly check for software and firmware updates to ensure optimal performance and access to new features.
- Cooling Fan: The powerful cooling fan helps maintain stability. Ensure it is not obstructed.
- Voice Control: Utilize the intelligent voice control feature for hands-free operation to enhance driving safety.
- Screen Protection: Consider using a screen protector to prevent scratches and maintain the QLED screen's clarity.