1. Introduction
Thank you for choosing the TKSTAR G50 Series 4G GPS Tracker. This device is a versatile and robust tracking solution designed for personal, vehicle, and asset tracking. Featuring 4G connectivity, strong magnetic attachment, and IP67 waterproofing, it offers reliable real-time location monitoring, historical route playback, and various alert functions through a dedicated mobile application and web platform.
2. Specifications
| Feature | Specification |
|---|---|
| Brand Name | tkstar |
| Model Name | G50, G50S, G50M, G50L 4G |
| GPS Type | GPS Tracker |
| GPS Module | Yes |
| Special Features | Remote Control, Magnetic Attachment, Waterproof (IP67) |
| Battery Life | 30 Hours & Up |
| Voltage | 5V |
| Out Power | NONE |
| Screen Size | No screen |
| GPS Geographic Location | Europe (General coverage, actual coverage depends on 4G network) |
| Certification | CE, FCC, RoHS |
| Package Weight | 0.45 kg |
| Package Dimensions | 16cm x 12cm x 12cm |
Model Specific Dimensions & Battery:
| Model | Battery Capacity | Dimensions (mm) | Weight (g) |
|---|---|---|---|
| G50S (S) | 3000mAh | 63 * 36 * 27.5 | 91 |
| G50M (M) | 6000mAh | 84.5 * 45 * 31.5 | 167 |
| G50L (L) | 10000mAh | 100 * 58 * 31.6 | 245 |
3. Package Contents
The package typically includes:
- TKSTAR G50 Series 4G GPS Tracker (selected model)
- USB Charging Cable
- User Manual (this document)
4. Setup Guide
4.1 SIM Card Installation
The TKSTAR G50 Series tracker requires a Nano SIM card with 4G data capabilities for full functionality. Ensure the SIM card is active and has sufficient data balance.
- Locate the SIM card cap on the side of the device.
- Carefully remove the SIM card cap to expose the Nano SIM card holder.
- Insert the Nano SIM card into the holder with the correct orientation (refer to the diagram below).
- Securely replace the SIM card cap to ensure waterproofing.
4.2 Initial Charging
Before first use, fully charge the device. Connect the provided USB charging cable to the magnetic charging port on the tracker and a compatible 5V USB power source. The Red LED indicator will show charging status.
4.3 Power On/Off
The device typically powers on automatically once a charged battery is inserted or connected to power. To power off, specific instructions may vary by model; generally, it involves a long press of a designated button or remote command via the app.
4.4 App & Web Platform Setup
To access tracking features, download the official mobile application or use the web platform:
- Mobile App: Search for "GPS365" or "365GPS" in your device's app store (iOS/Android).
- Web Platform: Visit www.365gps.net.
Follow the in-app or web instructions to register your device using its unique IMEI number.
4.5 Device Placement
The tracker features strong built-in magnets for easy attachment to metal surfaces. For optimal GPS signal, place the device where it has a clear view of the sky, if possible. For covert tracking, consider locations such as:
- Under the car seat
- Inside the trunk
- Attached to the chassis (ensure it's secure and won't be dislodged)
- Inside glove boxes
5. Operating Instructions
5.1 Real-time Tracking
Once logged into the mobile app or web platform, you can view the real-time location of your tracker on a map. The Blue LED indicates GPS satellite signal acquisition.
5.2 Multiple Device Management
The platform allows you to create a management account to monitor multiple TKSTAR devices simultaneously on a single map interface.
5.3 Historical Route Playback
Review up to three months of historical tracking data, including speed, mileage, and height information, directly through the app or web platform.
5.4 Geo-Fence Setup
Define virtual boundaries (Geo-Fences) on the map. The app will send push alert messages when the tracker enters or exits these predefined areas.
5.5 SOS Call Function
The device features an SOS call button. In an emergency, long-press the SOS button for 3 seconds to initiate a call sequence to pre-set SOS numbers. The device will call the primary SOS number, and if unanswered, it will proceed to call secondary numbers in a turn. A speaker is required for two-way communication.
To set up SOS numbers:
- Access the "Supervision" settings within the mobile app.
- Enter the primary SOS telephone number.
- Enter additional regulated telephone numbers (Regulate Tel1, Regulate Tel2) for sequential calling.
- Save the settings.
5.6 Vibration SOS Sound-activated Alarm
The tracker is equipped with a built-in 3D sensor and high-sensitivity noise reduction technology. If significant vibration or sound is detected, the device can send an alarm to the mobile app, initiate a call, or send an SMS to pre-configured numbers, enhancing safety and security.
6. Maintenance
6.1 Charging
Regularly charge your device to ensure continuous tracking. The Red LED indicates battery status. Use only the provided charging cable and a compatible 5V power adapter. Avoid using damaged cables or chargers.
6.2 Waterproofing (IP67)
The TKSTAR G50 Series trackers are IP67 waterproof, meaning they are protected from dust and can withstand immersion in water up to 1 meter for up to 30 minutes. Ensure the SIM card cap is securely closed to maintain waterproofing. Avoid prolonged submersion or exposure to high-pressure water jets.
6.3 Cleaning
Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
7. Troubleshooting
- Device not powering on: Ensure the battery is charged. Connect to a charger and check the Red LED indicator.
- No GPS signal (Blue LED off/flashing): Move the device to an open area with a clear view of the sky. Ensure the device is not obstructed by metal or dense materials.
- No 4G signal (Orange LED off/flashing): Check if the Nano SIM card is correctly inserted and activated. Verify that the SIM card has an active data plan. Contact your mobile carrier if necessary.
- App not showing location: Confirm the device has both GPS and 4G signals. Check your app's internet connection. Ensure the device is registered correctly in the app/web platform.
- SOS call not working: Verify that SOS numbers are correctly configured in the app. Ensure the SIM card has calling credit.
- Vibration alarm not triggering: Check the sensitivity settings in the app. Ensure the alarm feature is enabled.
- Device unresponsive: Use the Power Reset button (located near the SIM card slot, refer to Figure 3) to restart the device.
8. User Tips
- For extended battery life, consider using the larger G50M or G50L models, especially for long-term tracking without frequent charging access.
- When placing the tracker in a vehicle, experiment with different locations to find the best balance between covertness and GPS signal reception.
- Regularly check the device's battery level via the app to avoid unexpected power loss.
- Familiarize yourself with the Geo-Fence and alarm settings to customize alerts for your specific needs.
Note: No specific user tips were available from external reviews or Q&A at this time. The tips provided are general recommendations for optimal use.
9. Warranty & Support
For product support, technical assistance, or warranty inquiries, please refer to the contact information provided by your retailer or visit the official TKSTAR website. Keep your purchase receipt as proof of purchase for warranty claims.
The TKSTAR G50 Series is designed for reliability and security. For any issues not covered in this manual, please reach out to customer service.