1. Product Overview
The TUMMASTER J-10 PRO is a versatile ARGB fan hub and PWM controller designed to manage up to 10 ARGB fans and synchronize their lighting effects with your PC's motherboard. It features dual SATA power input for stable power delivery, magnetic attachment for easy installation, and a remote control for convenient lighting adjustments. This device is ideal for PC enthusiasts looking to enhance their system's cooling and aesthetics.
Video: Demonstration of the TUMMASTER J-10 PRO ARGB Fan Hub's lighting effects and features.

Image: The J-10 PRO ARGB Fan Hub and its accompanying remote control.
2. Package Contents
- 1x J-10 PRO ARGB Fan Controller/Hub
- 1x Remote Control
- 1x Power Cable (SATA)
- 1x ARGB Sync Cable
- 1x PWM Cable
3. Installation Guide
3.1 Physical Placement
The J-10 PRO fan hub features a magnetic design, allowing for convenient placement anywhere on your computer case. Ensure the chosen location allows for easy cable routing and access to ports.

Image: Magnetic design for easy placement within the PC case.
3.2 Connecting Fans and ARGB Devices
The hub supports up to 10 fans and 10 ARGB devices. Refer to the diagram below for proper connection.
- PWM Ports (12V-4Pin): Connect your 4-pin PWM fans to the designated FAN ports (FAN1-FAN10).
- LED Ports (5V-3Pin): Connect your 5V 3-pin ARGB fans or ARGB light bars to the designated ARGB ports (ARGB1-ARGB10).
- Important ARGB Note: Pay close attention to the arrow marked on the ARGB equipment plug and insert it in the direction of 5V. Incorrect insertion can damage the equipment. This hub does NOT support +12V 4-Pin RGB interface devices.

Image: Diagram showing the layout of PWM (12V-4Pin) and LED (5V-3Pin) ports on the hub, along with remote control instructions.
3.3 Power Connection
The J-10 PRO requires dual SATA power input for stable and efficient operation, especially when connecting multiple fans and ARGB devices. Connect the SATA power cables from your Power Supply Unit (PSU) to the two SATA power inputs on the hub.

Image: Wiring diagram showing SATA power connections from the PSU to the hub, and motherboard sync connections.
3.4 Motherboard Synchronization (Optional)
To synchronize ARGB lighting and PWM fan speed control with your motherboard, connect the provided sync cable from the hub's "PC IN PWM IN" port to the appropriate headers on your motherboard (CHA_FAN for PWM and ARGB/VDG for ARGB sync). The hub supports popular motherboard sync technologies like ASUS Aura Sync, MSI Mystic Light Sync, and ASRock Polychrome Sync.
- PWM Sync: Connect the PWM cable to the "PC IN PWM IN" port on the hub and to a 4-pin fan header (e.g., CHA_FAN) on your motherboard. Note that due to the limitation of PWM motherboard IC reading principles, only the speed of a single fan inserted into the red interface (FAN1) is recognized by the motherboard.
- ARGB Sync: Connect the ARGB sync cable to the "PC IN PWM IN" port on the hub and to a 5V 3-pin ARGB header (e.g., ARGB or VDG) on your motherboard.

Image: Connection of the sync cable to the motherboard for ARGB light synchronization and PWM speed control, highlighting dual SATA power input.
4. Operating Instructions
4.1 Remote Control Functions
The included RF remote control allows you to adjust lighting effects and fan speeds. Ensure the remote has a clear line of sight to the hub for optimal operation.
| Button/Function | Description |
|---|---|
| ON/OFF | Turn on or off the lighting. |
| RC Lock/Unlock | Press keys continuously, red light will flash once. Then locked. After RC lock, press any key, red light will flash twice. Then unlocked. |
| IN DEMO MODE | Press this key, red light will flash twice. Demo mode will be entered. Press again, red light will flash twice, demo mode will be exited. |
| Demo | Press to only demo mode. |
| Signal switching | Switch light of motherboard sync. |
| Make light bright | Increase lighting brightness. |
| Make light dark | Decrease lighting brightness. |
| Next Lighting Mode | Cycle to the next lighting effect. |
| Previous Light Mode | Cycle to the previous lighting effect. |
| Make light bright (Fan) | Increase fan lighting brightness. (This function does not work when the PWM function is enabled). |
| Make light dark (Fan) | Decrease fan lighting brightness. (This function does not work when the PWM function is enabled). |
| Color Buttons | Select specific static colors (White, Blue, Pink, Red, Orange, Green, Violet). |
4.2 PC Case LED Key Operation
If your PC case has an LED key, you can use it to control the lighting mode of the hub.
- Press the LED button for 1-4 seconds to switch the lighting mode.
- Press the LED button 2 times continuously to switch between motherboard synchronization and controller synchronization.
- Press the LED button for more than 4 seconds, then press it 4 times in a row to turn off the light. Press again to resume the light.
5. Maintenance
To ensure the longevity and optimal performance of your TUMMASTER J-10 PRO ARGB Fan Hub, follow these simple maintenance guidelines:
- Cleaning: Periodically clean the hub and connected components with a soft, dry cloth to remove dust buildup. Avoid using liquid cleaners directly on the device.
- Cable Management: Keep cables neatly organized within your PC case to prevent obstruction of airflow and reduce strain on connectors.
- Environmental Conditions: Operate the hub within standard PC operating temperatures and humidity levels. Avoid extreme conditions.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fans/Lights not working | No power to the hub; Loose connections; Incorrect ARGB voltage. | Ensure dual SATA power cables are securely connected to the PSU and hub. Check all fan and ARGB cable connections. Verify ARGB devices are 5V 3-pin and connected in the correct orientation (arrow to 5V). |
| ARGB lights not syncing with motherboard | Sync cable not connected; Incorrect motherboard header; Software issue. | Connect the ARGB sync cable from the hub to the motherboard's 5V 3-pin ARGB header. Ensure your motherboard's ARGB software is installed and configured correctly. Use the remote or PC case LED key to switch to motherboard sync mode. |
| Fan speed not regulating via motherboard PWM | PWM cable not connected; Fan not in red interface; Motherboard settings. | Connect the PWM cable from the hub to the motherboard's 4-pin fan header. Ensure the primary fan for speed reading is connected to the red "FAN1" port on the hub. Check motherboard BIOS/UEFI settings for fan control. |
| Remote control not responding | Battery low/dead; Obstruction; Hub not powered. | Replace the remote control battery. Ensure no obstructions between the remote and the hub. Verify the hub is powered on. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | J-10 PRO |
| Type | PWM Controller/HUB |
| Brand Name | TUMMASTER |
| Origin | Mainland China |
| Certification | CE, FCC |
| Color | Black |
| Use | Hub/Controller for PC/Computer |
| Dimensions (L*W*H) | 3.83 * 2.33 * 0.6 inches |
| PWM Ports | 10 (12V-4Pin) |
| LED Ports | 10 (5V-3Pin ARGB) |
| Power Input | Dual SATA |
| Assembly Required | No |
| Package | Yes |
8. User Tips
- ARGB Compatibility: Always double-check that your ARGB devices are 5V 3-pin. Connecting 12V 4-pin RGB devices to the ARGB ports will cause damage.
- PWM Fan Speed Monitoring: When using motherboard PWM control, remember that only the fan connected to the red "FAN1" port will have its speed reported to the motherboard. Other fans will follow the PWM signal but won't report individual speeds.
- Mixing Fan Types: You can connect both 4-pin PWM fans and 3-pin ARGB fans/devices to the hub simultaneously, as long as they are connected to their respective correct ports (PWM for 4-pin fans, ARGB for 3-pin lighting).
- Cable Management: Utilize the magnetic attachment and the hub's compact size to keep your PC case wiring tidy, improving airflow and aesthetics.
9. Warranty and Support
For any issues not covered in this manual, please contact the seller or manufacturer's support channel. Keep your purchase receipt for warranty claims. A detailed user manual in PDF format is available for download from the product page for further reference.
PDF Manual Reference: TUMMASTER J-10 PRO User Manual (PDF)