Usongshine 17HS8401S

Contents

Usongshine Nema17 Stepper Motor 17HS8401S User Manual

Model: 17HS8401S | Brand: Usongshine

1. Introduction

This manual provides essential information for the safe and effective use of the Usongshine Nema17 Stepper Motor, Model 17HS8401S. This motor is designed for applications requiring precise motion control, such as 3D printers, CNC engravers, and laser engraving machines. Please read this manual thoroughly before installation and operation.

Usongshine Nema17 Stepper Motor with XH-2.54 connector and cable
Figure 1: Usongshine Nema17 Stepper Motor (Model 17HS8401S)

2. Warnings & Safety Information

Adherence to the following safety guidelines is crucial to prevent injury and damage to equipment.

  • Fire and Burn Hazard: High temperatures generated during processing may ignite the workpiece, smoke, or surrounding materials. The processing area must be kept clear of flammable substances and equipped with fire extinguishing equipment. After processing, the workpiece and machine components (e.g., spindle, laser head) may remain hot for an extended period; verify full cooling before handling.
  • Mechanical Injury Hazard: High-speed rotating spindles, moving gantries, belts, and lead screws pose serious risks of crushing, cutting, or entanglement injuries. Before performing any installation, commissioning, cleaning, or maintenance operation, disconnect the machine from the main power supply.
  • Electrical Hazard: High-voltage circuits are present internally. Unauthorized personnel must not open the electrical control cabinet. All electrical connections must comply with local regulations and be performed by qualified electricians.
  • Hazardous Substances and Fumes: Processing certain materials (e.g., plastics, composites, coated metals) may generate toxic, carcinogenic, or irritating fumes and dust. Use only in environments equipped with an effective Local Exhaust Ventilation (LEV) system.

3. Product Overview

The Usongshine Nema17 Stepper Motor (Model 17HS8401S) is a hybrid stepper motor known for its high torque and low noise operation. It is commonly used in precision applications such as 3D printers, CNC engraving, and laser engraving machines.

Close-up of the stepper motor highlighting high torque and low noise
Figure 2: High torque, Low noise operation
Stepper motor shown with text indicating its application in 3D printing and engraving
Figure 3: Applications in 3D printing, engraving machines, etc.

4. Specifications

AttributeValue
NameNema 17 stepper motor
Model17HS8401S
Step Angle1.8° ± 0.09°
Rated VoltageDC 3.0 V
Current / PhaseDC 1.5 A / Phase
Holding Torque≥ 480mN.M (48N.cm)
Maximum no load Starling frequency≥ 1900 PPS
Phase2
TypeHYBRID
Plug TypeXH-2.54
Weight312 g
CertificationCE
OriginMainland China
Wireless FunctionalityNo
Battery IncludedNo
High-concerned chemicalNone

Package Dimensions:

  • Length: 27 cm
  • Width: 18 cm
  • Height: 5 cm
  • Weight: 2.0 kg
Table of technical specifications for the Nema 17 stepper motor
Figure 4: Detailed Technical Specifications
Dimension diagram and electrical schematic for the stepper motor
Figure 5: Dimension Diagram and Electrical Schematic

5. Setup and Installation

This accessory must be replaced exclusively by personnel trained by the equipment manufacturer or otherwise qualified professionals, strictly following the original manufacturer's "User Manual / Maintenance Manual". Incorrect installation may result in equipment damage, performance degradation, or safety hazards.

5.1 Preparation

  • Confirm compatibility of the accessory model (17HS8401S) with your equipment.
  • Ensure the workspace is clean and well-ventilated.

5.2 Power Disconnection

  • Shut down the host machine and unplug it from the main power source.
  • Wait until all components—especially the laser source and spindle motor—are fully cooled.

5.3 Installation of New Component

  • Install the new accessory in reverse order of removal.
  • Ensure all mechanical connections are securely tightened.
  • Verify all electrical connections are correct, properly polarized, and firmly secured. Refer to the electrical schematic in Figure 5 for wiring guidance.
Stepper motor installed in a 3D printer or CNC machine, showing typical mounting
Figure 6: Example installation in a 3D printer

6. Operation

6.1 Calibration

After installation, recalibrate the relevant systems (e.g., laser power, tool length, engraving area) as specified in the original manufacturer's manual of your equipment.

6.2 Testing

Conduct a low-power/low-speed no-load test under safe conditions to verify smooth operation, absence of abnormal noise, and absence of alarms before resuming normal use.

Video 1: Demonstration of stepper motor rotation distance control (10mm, 0.1mm, 1mm) using a 3D printer control panel.

7. Maintenance

To ensure optimal performance and longevity of your Usongshine Nema17 Stepper Motor, it is important to operate, maintain, and store the device in accordance with this manual and all accompanying safety guidelines. Regular cleaning and inspection of connections are recommended. Avoid using the motor in damp, dusty, corrosive-gas, or explosive environments.

8. Troubleshooting

If you encounter issues during operation, perform the following checks:

  • No Movement/Erratic Movement: Verify all electrical connections are secure and correctly wired. Ensure the motor is receiving the correct voltage and current as per specifications.
  • Abnormal Noise/Vibration: Check for any mechanical obstructions or loose components. Ensure the motor is properly mounted and aligned.
  • Overheating: Confirm that the motor is not overloaded and that the operating environment is adequately ventilated.

For complex issues, refer to the original equipment's user manual or consult a qualified technician.

9. User Tips

  • Wiring Correction: Some users have found it necessary to reverse the two middle contacts of the motor cable for correct operation, depending on the specific control board used. Always verify wiring against your controller's documentation.
  • Voltage Compatibility: While the motor is rated for DC 3.0V, it can often be driven by higher voltage systems (e.g., 24V) when paired with an appropriate stepper motor driver that regulates current. Ensure your driver is correctly configured to limit current to 1.5A per phase to prevent damage.

10. Manufacturer Information

The Usongshine Nema17 Stepper Motor is manufactured by Shenzhen Two Trees Technology Co., Ltd., which also produces TWOTREES branded equipment that this motor is compatible with.

  • Manufacturer Name: Shenzhen Two Trees Technology Co., Ltd.
  • Address: 402, Building 11, No. 9, Qilin Road, Nankeng Community, Sakata Street, Longgang District, Shenzhen City, Guangdong Province, China
  • EU Responsible Person Information:
    • Name: AMZ ECREP SL
    • Address: Calle Gran Via 49, 7 Deb. Spain

For additional documentation, including a detailed user manual (PDF), please refer to the official product page or contact Usongshine support. The PDF document can be found at: User Manual (PDF).

11. Disclaimer

By using this product, the user acknowledges and agrees to the following terms:

  • The manufacturer and seller shall not be liable for any direct or indirect damages resulting from:
    • Failure to operate, maintain, or store the device in accordance with this manual and all accompanying safety guidelines.
    • Unauthorized modification of the device, or use of non-OEM or incompatible accessories or software.
    • Use of the device outside its intended purpose, or processing of prohibited or unknown materials.
    • Installation, commissioning, or repair performed by personnel not authorized or trained by the manufacturer.
    • Damage caused by force majeure or unforeseen events such as fire, flood, lightning strike, or abnormal voltage.
    • Normal wear and tear (e.g., natural power decay of the laser module over time).
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.