1. Introduction
This manual provides detailed instructions for the installation and operation of the PHYEE [Dual 20 Pin] Wiring Harness CAN Bus Decoder. This product is designed to integrate an aftermarket Android car radio with a 16-pin connector into specific Toyota vehicles, maintaining functionality such as steering wheel controls and support for the JBL amplifier system.
Important Note: The radio must be a 16-Pin connector Android system. Ensure your car's model and model year match the harness adapter for proper functionality. If you are unsure about compatibility, please contact the seller before installation.
2. Safety Information
- Always disconnect the vehicle's battery before performing any electrical work.
- Ensure all connections are secure to prevent short circuits or damage to the vehicle's electrical system.
- If you are not confident in your ability to install this product, seek professional assistance.
- Do not modify the wiring harness or CAN Bus decoder. Unauthorized modifications may void the warranty and cause damage.
3. Packaging List
- Radio wiring harness adapter * 1 piece
- Hiworld CAN Bus decoder * 1 piece
4. Specifications
| Attribute | Value |
|---|---|
| Brand Name | PHYEE |
| Model Name | TYT20PWC2 |
| Item Type | Cables, Adapters & Sockets |
| Voltage | 12 V |
| Material | Copper |
| Item Weight | 0.12kg |
| Item Size | 16 pin wiring harness |
| PCB included | Yes |
| CAN Bus Decoder | Hiworld |
| Suitable for | Car Android with 16 Pin connector |
| Support JBL Amplifier System | Yes |
| Suitable Car 1 | Toyota Prado 2009-2013 |
| Suitable Car 2 | Toyota Highlander 2009-2013 |
| Suitable Car 3 | for Toyota Puris 2010-2013 |
5. Setup Instructions
5.1. Component Identification
Familiarize yourself with the components of the wiring harness and CAN Bus decoder:


5.2. Vehicle Compatibility
This wiring harness and CAN Bus decoder are suitable for the following Toyota models with a JBL amplifier system:
- Toyota Prado 2010-2013
- Toyota Prius 2010-2015
- Toyota Highlander 2009-2023
Ensure your vehicle's original radio has the necessary 20-pin connectors (PA, PB, PD) as shown in Figure 3.

5.3. Wiring Diagram and Connections
Connect the wiring harness adapter and CAN Bus decoder correctly as per the following diagram and pinout details:

16-Pin Connector Pinout:
- 01: RR- (Rear Right Speaker Negative)
- 02: RR+ (Rear Right Speaker Positive)
- 03: RL+ (Rear Left Speaker Positive)
- 04: RL- (Rear Left Speaker Negative)
- 05: ANT (Auto Antenna Power)
- 06: KEY 2 (Steering Wheel Control 2)
- 07: ILL (Illuminate Backlight)
- 08: Battery+ (Constant Power Supply +12V)
- 09: FL+ (Front Left Speaker Positive)
- 10: FL- (Front Left Speaker Negative)
- 11: FR+ (Front Right Speaker Positive)
- 12: FR- (Front Right Speaker Negative)
- 13: KEY 1 (Steering Wheel Control 1)
- 14: REVERSE (Reversing camera control line)
- 15: ACC 12V (Ignition Switch)
- 16: GND (Ground Wire / B-)
Connect the 16-pin plug from the harness to your Android head unit's 16-pin connector. Connect the 8-pin connector from the harness to the CAN Bus decoder. The 20-pin connector from the harness connects to your car's original wiring.

6. Operating Instructions
6.1. CAN Bus Setting Operation
After physical installation, configure your Android system to recognize the CAN Bus decoder:
- Enter the Android system's factory settings part (a password may be required, consult your Android unit's manual).
- Choose the CAN Bus decoder type.
- Choose the car brand (e.g., Toyota).
- Choose the specific car model and year (e.g., Prado 2010-2013).

Decoder Label Options:
| No. | Decoder Label | Setting Step 1 (CAN Bus Setting) | Setting Step 2 (Car Brand) | Setting Step 3 (Car Model & Year) |
|---|---|---|---|---|
| 1 | Raise/睿志诚 | Raise/RZC | Car Brand | Car Model & Year |
| 2 | Hiworld | Hiworld/WC | Car Brand | Car Model & Year |
| 3 | OD | OD/Oudi | Car Brand | Car Model & Year |
| 4 | SimpleSoft | SimpleSoft/XP/XINPU | Car Brand | Car Model & Year |
| 5 | LuZheng | LuZheng/LZ | Car Brand | Car Model & Year |
If necessary, connect your Android system to the internet to update the CAN Bus APK version.
6.2. CAN Bus Decoder Functions
Once correctly configured, the CAN Bus decoder enables the following functions:
- Support for original car steering wheel control signals.
- Display of car door status information.
- Display of original car air conditioning information.
- Support for steering wheel corner information of the original car.
- Support for original vehicle settings.
7. Maintenance
- Keep the wiring harness and decoder free from moisture and extreme temperatures.
- Avoid pulling on the wires excessively during installation or removal.
- Regularly check connections for any signs of wear or corrosion.
- Clean the components with a dry, soft cloth if necessary.
8. Troubleshooting
8.1. Common Issues and Solutions
- Steering wheel buttons not working:
- Ensure the CAN Bus decoder is correctly connected and configured in the Android system's factory settings.
- Verify that the correct CAN Bus decoder type, car brand, model, and year are selected.
- Check the wiring connections for the KEY1 and KEY2 lines (pins 13 and 6 respectively on the 16-pin connector).
- Incompatibility with vehicle:
- Double-check that your car model and year are explicitly listed as compatible.
- Confirm your vehicle has a JBL amplifier system if required by the product.
- If your car model is not listed or is outside the specified year range, the product may not be compatible.
- Loss of original car configuration/functionality:
- This can occur if the CAN Bus decoder is incorrectly configured or if the product is incompatible with your specific vehicle's electronics.
- Re-verify all CAN Bus settings in the Android system.
- If issues persist, disconnect the aftermarket unit and revert to the original setup to confirm the problem source.
- No power to the Android unit:
- Check the Battery+ (pin 8), ACC 12V (pin 15), and GND (pin 16) connections on the 16-pin connector.
- Ensure the vehicle's fuse for the radio is intact.
9. User Tips
- Verify Compatibility First: Several users have reported incompatibility issues with specific car models or years not explicitly listed. Always confirm compatibility with the seller before purchase, especially for older models or variations not mentioned.
- Check CAN Bus Settings Carefully: Incorrect CAN Bus settings are a common cause for non-functional steering wheel controls or other integrated features. Take your time to select the correct decoder brand, car brand, model, and year in your Android unit's factory settings.
- Professional Installation Recommended: If you are unfamiliar with car audio wiring or CAN Bus systems, professional installation can prevent potential damage and ensure correct functionality.
10. Warranty and Support
This product typically comes with a 1-year warranty. For any problems or technical assistance, please contact PHYEE Car-Electronic Store directly through the platform where you purchased the product.
A detailed user manual in PDF format is also available for download: View User Manual (PDF)