MAXRUNON D10 Motorcycle Bluetooth Intercom Helmet Headset

Introduction

The MAXRUNON D10 is an intelligent helmet Bluetooth intercom system designed to enhance your riding experience. It features advanced AI voice control, Environmental Noise Cancellation (ENC), IPX7 waterproofing, FM radio, and Bluetooth 5.4 connectivity. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and safety.

Package Contents

Ensure all items are present in your package:

• D10 Main Unit
• Button Mic
• Velcro for Button Mic
• Boom Mic
• Velcro for Boom Mic
• Sponge for Boom Mic
• Speaker Unit
• 3M Glue Plate
• Back Clip
• Speaker Pads
• Velcro for Speaker
• Type-C Cable

Image: Detailed view of all components included in the MAXRUNON D10 package.

Product Overview

The D10 unit features intuitive controls and essential ports:

1. Volume - Button
2. Volume + Button
3. Function Button
4. Intercom Button
5. Audio Interface
6. Type-C Charging Port

Image: MAXRUNON D10 main unit with labeled buttons and ports.

Setup & Installation

Follow these steps to install your D10 intercom system on your helmet:

1. Choose Mounting Method: Decide between the back clip or the 3M glue plate for attaching the main unit to your helmet.
2. Attach Main Unit: Securely attach the D10 main unit to the side of your helmet using your chosen method. Ensure it is firmly in place.
3. Speaker Placement: Position the speaker units inside your helmet, aligning them with your ears for optimal sound. Use the provided Velcro for speaker attachment.
4. Microphone Selection: Choose between the Boom Microphone (for open-face helmets) or the Button Microphone (for full-face helmets).
5. Microphone Installation: Install the selected microphone. For boom microphones, ensure it is positioned close to your mouth. For button microphones, attach it discreetly inside the helmet.
6. Cable Management: Route all cables neatly within the helmet padding to avoid interference and ensure comfort. The short line is typically installed on the left side of the helmet, and the long line on the right side.

Image: Visual guide for D10 helmet installation.

Basic Operations

The D10 supports both voice commands and button operations. The awakening word for voice commands is "Hi Max".

Power On/Off

• Button Operation: Simultaneously long press the Intercom button (4) and Volume - button (3) for 2 seconds.

Phone Pairing

• Voice Command: Say "Hi Max, phone pairing".
• Button Operation: Long press the Function button (3) for 3 seconds. The light will flash red and blue.
• Universal Pairing: To pair with other Bluetooth headsets, activate Bluetooth pairing mode on the other headset. Then, on the D10, long press the Intercom button (4) for 2 seconds. The light will flash red and green.

Activating Voice Assistant

• Voice Command: Say "Hi Max". (Ensure "Voice Dialing" is enabled in the app).
• Button Operation: Simultaneously long press the Intercom button (4) and Volume + button (2) for 2 seconds.

Volume Control

• Volume Up: Say "Hi Max, volume up" or short press the Volume + button (2).
• Volume Down: Say "Hi Max, volume down" or short press the Volume - button (1).

Microphone On/Off

• Button Operation: Long press the Function button (3) for 3 seconds.

Restoring Factory Settings

• Button Operation: Simultaneously long press the Volume + button (2) and Function button (3) for 3 seconds. The device will reboot and reset.

Advanced Operations

Music Playback

• Play Music: Say "Hi Max, music on" or short press the Function button (3).
• Pause Music: Say "Hi Max, pause music" or short press the Function button (3).
• Previous Track: Say "Hi Max, previous track" or short press the Volume + button (2) for 3 seconds.
• Next Track: Say "Hi Max, next track" or short press the Volume - button (1) for 3 seconds.

FM Radio

• Turn On/Off Radio: Say "Hi Max, radio on" / "Hi Max, turn off the radio" or double-tap the Function button (3).
• Switch Station (Previous): Say "Hi Max, previous station" or short press the Volume + button (2) for 3 seconds.
• Switch Station (Next): Say "Hi Max, next station" or short press the Volume - button (1) for 3 seconds.

Image: D10 with built-in FM Radio for on-the-go entertainment.

Phone Calls

• Answer Call: Say "Hi Max, answer the phone" or short press any button.
• End Call: Say "Hi Max, hang up" or short press the Intercom button (4).
• Reject Call: Say "Hi Max, hang up" or long press the Intercom button (4) for 3 seconds.
• Automatic Call Answering: This feature can be turned on/off via the MAXRUNOS APP.

Intercom Modes

The D10 supports two intercom modes: Group Mode and Free Mode.

Group Mode (Team Mode)

Group Mode is a private communication feature for up to 4 riders. A group network must be set up before communication. Switching from Group Mode to Universal Pairing will disconnect the intercom from Group Mode.

• Activate Group Mode: Say "Hi Max, group mode" or short press the Intercom button (4).
• Cancel Group Mesh: Say "Hi Max, group mesh" or long press the Intercom button (4) for 2 seconds.
• End Intercom: Say "Hi Max, end intercom" or short press the Intercom button (4).

Image: 4-Way Intercom connecting riders up to 1.6 km (0.9 mi).

Free Mode

Free Mode is an open intercom mode that does not require prior pairing. Up to 4 people can automatically connect for intercom if they are within communication range.

• Activate Free Mode: Say "Hi Max, free mode" or short press the Intercom button (4).

Offline/Online Commands

The D10 supports both offline and online voice commands. Offline commands work without a phone connection or network, while online commands require the D10 to be paired with a phone connected to the internet, utilizing Siri/Google Assistant.

Image: Table of Offline and Online Voice Commands.

MAXRUNOS App & Firmware Updates

The MAXRUNOS App allows you to enhance the functionality of your D10 headset, easily upgrade its firmware, and personalize various settings. Stay up-to-date with the latest features and optimize your riding experience directly from your smartphone.

Image: Multilingual Smart IoT App interface.

Specifications

User Tips

• For optimal voice command recognition, especially at high speeds, ensure your microphone is positioned correctly and speak clearly.
• The MAXRUNOS app is highly recommended for managing settings, firmware updates, and personalizing LED lighting.
• When using universal pairing, remember that the D10 is compatible with other brands, but ensure the other headset is in its pairing mode.
• If you experience issues with voice commands on the highway, try adjusting the volume or using button controls as an alternative.
• The accessory kit is comprehensive, offering various mounting and microphone options to suit different helmet types and preferences.
• While the D10 supports multi-audio output, for simultaneous music listening on multiple devices, you might need to configure your phone's Bluetooth settings (e.g., Samsung's dual audio feature).

Troubleshooting

• Device not powering on: Ensure the battery is charged. Connect to a Type-C charger for at least 2 hours.
• Cannot pair with phone/other intercom: Ensure both devices are in pairing mode. For universal pairing, activate pairing mode on the other headset first. If issues persist, try restoring the D10 to factory settings.
• Voice commands not responding: Check if the "Voice Dialing" feature is enabled in the MAXRUNOS app. Ensure you are using the correct awakening word "Hi Max". In noisy environments or at high speeds, voice recognition might be less effective; try using button controls.
• Poor audio quality/noise: Verify that the speakers are correctly positioned inside the helmet and that the microphone is close to your mouth. The ENC/DSP noise reduction should minimize background noise, but extreme conditions might still affect clarity.
• Intercom range issues: Ensure there are no major obstructions between riders. The maximum range is up to 1.6 km in optimal conditions.
• Firmware update issues: Ensure your smartphone has a stable internet connection and sufficient battery during the update process via the MAXRUNOS app.

Warranty & Support

The MAXRUNON D10 comes with a 2-year warranty. Lifetime technical support is provided. For any issues or inquiries, please contact MAXRUNON customer service.

For additional information and detailed specifications, you may refer to the official user manual PDF: MAXRUNON D10 User Manual (PDF)

Safety Information

RF Exposure Statement

This equipment complies with the FCC and ISED radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

IC Warning

This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:

1. L'appareil ne doit pas produire de brouillage;
2. L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.