HWATEL Multi-Band Cellular Amplifier Signal Booster

Contents

HWATEL Multi-Band Cellular Amplifier Signal Booster User Manual

Professional Mobile Signal Booster Solutions

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your HWATEL Multi-Band Cellular Amplifier Signal Booster. This device is designed to enhance 2G, 3G, 4G, and 5G mobile signals, improving call quality and data speeds in areas with weak reception.

The package typically includes the signal booster unit and a power adapter. Please note that antennas and cables are not included and must be purchased separately.

Contents of the box: Signal Booster and Power Adapter
Contents of the box: Signal Booster and Power Adapter. Antennas and cables are sold separately.

Setup Instructions

Step 1: Find the Position with the Strongest Signal

Finding the strongest signal position for the outdoor antenna is crucial for optimal performance. This location is typically above the roofline, on the side of the structure facing the nearest cellular tower, and positioned as high as practical to ensure a clear line of sight. Optimal placement minimizes obstructions and maximizes signal strength and stability.

To measure signal strength:

  • For iPhone: Dial *3001#12345#* then press the call button. Choose 'All Metrics', click 'Serving Cell Info', and check 'Band Info', 'RSRP', and 'SINR'.
  • For Android: Download and install an app like "Network Cell Info Lite", "Cellular-Pro", or "Cellular-Z". Check 'Band', 'RSRP', and 'SINR'.
Diagram showing signal measurement on iPhone and Android devices, with instructions for checking RSRP and SINR values.
Use your mobile device to measure signal strength (RSRP, SINR) to find the best outdoor antenna placement.

The coverage area is directly dependent on the strength of the incoming signal received by the outdoor antenna. If the outdoor signal is less than 2 bars, the coverage area will be limited. If the outdoor signal is less than 1 bar, the booster may not work effectively.

Step 2: Install the Outdoor Antenna

Mount the outdoor antenna at the location identified in Step 1. Ensure it is positioned above the roofline and at the highest practical elevation. Verify that the installation site provides a minimum clearance radius of 3 meters, free from physical obstructions and other radiating or transmitting elements that may cause interference.

Raising the outdoor antenna or aligning it directly toward the serving mobile signal tower should result in an increase in received signal strength (RSRP), ideally reaching its optimal maximum level.

Important: Adjust the direction of the outdoor antenna and continuously monitor the indoor signal with your cellphone to achieve optimal signal strength.

Diagrams illustrating correct outdoor antenna placement (facing the tower) and incorrect placements (wrong direction, blocked by roof).
Proper outdoor antenna placement and alignment are critical for performance.

Step 3: Install the Indoor Antenna

The provided panel antenna(s) should be mounted facing the area where signal coverage is required. It is essential that they are not directed toward the outdoor antenna.

Alert! Avoiding Loopback: During indoor antenna installation, you must ensure that the indoor antenna is positioned far away from the outdoor antenna. They should be separated by a solid wall and installed back-to-back to maintain adequate isolation. Failure to maintain proper separation may result in loopback or signal noise. In such cases, the cellphone may indicate a strong or fluctuating signal; however, calls may still drop and data speeds may remain low.

To avoid loopback:

  • Outdoor and indoor antennas should be separated by two walls.
  • Outdoor and indoor antennas should be placed back-to-back.
  • Maintain a vertical difference of over 13 feet (approximately 4 meters).
  • Maintain a horizontal distance of over 30 feet (approximately 9 meters).
Diagrams showing scenarios of loopback interference due to insufficient separation between indoor and outdoor antennas, and recommended separation distances.
Proper separation between indoor and outdoor antennas prevents signal loopback and interference.

Step 4: Install the Signal Booster

When positioning the booster, select a location near a functional AC power outlet. Do not expose the signal repeater to excessive heat, direct sunlight, moisture, or sealed airtight enclosures.

  1. Connect the outdoor antenna cable to the port labeled “Outside” or “BTS” on the signal booster and tighten the connection securely.
  2. Connect the cable from the indoor antenna to the port labeled “Inside” or “MS” on the signal booster and tighten the connection securely.
  3. Connect the AC power adapter cord to the signal booster to power on the booster.
Video demonstrating the installation process and signal improvement.

Operating Instructions

Once the outdoor and indoor antennas are properly connected and the power adapter is plugged in, the HWATEL signal booster will automatically begin to amplify the mobile signals. The booster features individual display screens for each band (e.g., 4G(DCS), 2G(GSM), 3G(WCDMA), 4G(LTE-2600)) which may indicate signal status or strength for the respective frequencies.

You can verify the improved signal strength by checking your mobile phone's signal status, as demonstrated in the installation video. Look for an increase in dBm and asu values, indicating a stronger and more stable connection.

Maintenance

To ensure the longevity and optimal performance of your signal booster, follow these maintenance guidelines:

  • Secure Connections: Periodically check all cable connections to ensure they are tight and secure. Loose connections can degrade signal quality.
  • Environmental Protection: Keep the booster unit in a dry, well-ventilated area, away from excessive heat, direct sunlight, and moisture.
  • Cleanliness: Keep the booster free from dust and debris. Use a soft, dry cloth for cleaning.
  • Performance Check: Occasionally check your mobile phone's signal strength in the boosted area to confirm the system is operating effectively.

Troubleshooting

If you experience issues with your signal booster, refer to the following troubleshooting steps:

No Signal Improvement

  • Outdoor Antenna Placement: Re-evaluate the outdoor antenna's position. Ensure it is in the location with the strongest available signal and has a clear line of sight to the cellular tower.
  • Antenna Separation: Verify that there is adequate separation between the outdoor and indoor antennas (solid wall, back-to-back, >13ft vertical, >30ft horizontal) to prevent signal loopback.
  • Cable Connections: Check all coaxial cable connections. Ensure they are securely tightened to the booster and antennas.
  • Power Supply: Confirm the power adapter is correctly plugged into a functional AC outlet and the booster is powered on.
  • Frequency Compatibility: Ensure the booster supports the specific frequency bands used by your mobile carrier in your region. Refer to the Specifications section.

Fluctuating Signal or Dropped Calls

  • Loopback/Interference: This is often caused by insufficient isolation between the indoor and outdoor antennas. Increase the physical separation between them, ensuring a solid wall is between them.
  • Physical Obstructions: Check for any new obstructions that might be blocking the signal path to the outdoor antenna.

Booster Not Powering On

  • Power Outlet: Test the AC power outlet with another device to ensure it is working.
  • Power Adapter: Check the power adapter for any visible damage.

Specifications

FeatureDetail
BrandHWATEL
Network TypeLTE (Supports 2G, 3G, 4G, 5G)
Frequency Bands850/900/1800/2100/2600Mhz (Specific bands may include B20, B8, B3, B1, B5, B7, B28, B4/66, B2/25 depending on model configuration)
CertificationsCE, FCC, RoHS
Dimensions (Booster)143mm x 155mm x 26mm (approximate)
Weight (Booster)0.8 kg
Package Dimensions30cm x 20cm x 10cm
OriginMainland China

User Tips

  • This booster is particularly effective in rural areas or locations with significant coverage difficulties, where an existing weak signal can be amplified.
  • Always verify the specific frequency bands supported by your booster model against your local mobile carrier's network frequencies to ensure compatibility.
  • While designed for indoor use, the effectiveness of the booster relies on a sufficiently strong signal being available at the outdoor antenna.
  • The booster is capable of enhancing 5G signals if the selected model supports the relevant 5G frequency bands.
  • For optimal performance in large indoor spaces like shopping malls, ensure the outdoor signal is robust and consider the layout for indoor antenna placement to maximize coverage.

Warranty and Support

For further details, specifications, or advanced troubleshooting, please refer to the official user manual PDF available at HWATEL User Manual (PDF).

If you encounter any issues while installing or operating your cell phone signal booster, please contact the HWATEL technical support team through the following channels:

  • Company: HWATEL Technology Co., Ltd
  • Address: Bldg 21, FengZeYingHe, Shangdi National High-Tech Park, Beijing, China, 100084
  • Website: www.hwatel.com
  • Email: info@hwatel.com / hwatel@foxmail.com
  • Phone Number: +86-18618303017
  • WhatsApp: +86-18618303017

© 2023 HWATEL Technology Co., Ltd. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.