itstool SS001, SS002, SS002R Pro

Contents

Lishi 2-in-1 SS001, SS002, SS002R Pro Lock Pick and Decoder Instruction Manual

Your guide to using the Lishi 2-in-1 Professional Lock Picking and Decoding Tools

1. Introduction

The Lishi 2-in-1 Pro series tools (SS001, SS002, SS002R) are precision instruments designed for professional locksmiths to pick and decode specific lock types. These tools combine the functionality of a pick and a decoder into a single unit, allowing for efficient and accurate manipulation of lock mechanisms.

Each model in the series is designed for a particular lock profile, ensuring optimal performance when matched correctly with the target lock.

Lishi SS001 Pro 2-in-1 pick in its protective case
Figure 1: Lishi SS001 Pro 2-in-1 pick in its protective case.

2. Package Contents

Upon receiving your Lishi 2-in-1 Pro tool, please verify the contents:

  • 1 x Lishi 2-in-1 Pro Lock Pick and Decoder (SS001, SS002, or SS002R model as selected)
  • 1 x Protective storage case
Lishi SS001 Pro and SS002 Pro 2-in-1 picks in their cases, side-by-side
Figure 2: Lishi SS001 Pro and SS002 Pro 2-in-1 picks in their cases.

3. Setup and Compatibility

Before use, ensure you have selected the correct Lishi 2-in-1 Pro tool for the target lock. Each model is designed for specific lock types:

  • SS001 Pro: Designed for SS001 type locks and keys.
  • SS002 Pro: Designed for SS002 type locks and keys.
  • SS002R Pro: Designed for SS002R type locks and keys.

Using the incorrect tool can damage both the tool and the lock.

Diagram illustrating compatibility: SS001 for SS001 locks/keys, SS002 for SS002 locks/keys, SS002R for SS002R locks/keys
Figure 3: Compatibility chart for Lishi SS001, SS002, and SS002R tools.

4. Operating Instructions

The Lishi 2-in-1 Pro tool allows for both picking and decoding of locks. Mastery of these tools requires practice and a thorough understanding of lock mechanisms.

General Operation Principles:

  1. Insert the Tool: Carefully insert the Lishi tool into the keyway of the lock, ensuring it is fully seated.
  2. Apply Tension: Apply light, consistent tension to the tension wrench (integrated or separate, depending on the tool design) in the direction of the opening.
  3. Pick the Pins: Using the picking blade, manipulate each pin individually, feeling for the binding pin and setting it. Repeat this process for all pins until the lock opens.
  4. Decode the Lock: Once the lock is picked open, or during the picking process, use the decoding marks on the tool to read the depths of the pins. This allows you to determine the key bitting.
  5. Remove the Tool: Once picking and decoding are complete, carefully remove the tool from the lock.
Close-up view of the working end of an SS002 Pro 2-in-1 pick, showing the picking and decoding mechanism
Figure 4: Close-up of the SS002 Pro working end, illustrating the picking and decoding mechanism.

Always use a gentle touch and avoid excessive force, as these tools are precision instruments.

5. Maintenance

Proper maintenance ensures the longevity and performance of your Lishi 2-in-1 Pro tool.

  • Cleaning: After each use, gently wipe the tool with a clean, dry cloth to remove any debris or residue. Avoid using harsh chemicals or abrasive materials.
  • Lubrication: Periodically, apply a very small amount of dry lubricant (e.g., graphite powder) to the moving parts of the tool to maintain smooth operation. Do not over-lubricate.
  • Storage: Always store the tool in its protective case when not in use. This prevents damage to the delicate picking and decoding tips and protects it from environmental factors like dust and moisture.
  • Inspection: Regularly inspect the tool for any signs of wear, bending, or damage. Discontinue use if the tool appears compromised.

6. Troubleshooting

If you encounter issues while using your Lishi 2-in-1 Pro tool, consider the following:

  • Tool Not Entering Lock: Ensure you are using the correct Lishi model for the specific lock. Check for obstructions in the keyway.
  • Difficulty Picking/Decoding: This often indicates insufficient practice or incorrect technique. Review basic lock picking principles and practice on transparent or practice locks. Ensure you are applying appropriate tension.
  • Tool Bends or Breaks: These tools are made of metal but are designed for precision, not brute force. Excessive force will cause bending or breakage. Always use a light touch and proper technique. If the tool bends, it may lose its accuracy and should be replaced.

7. Specifications

FeatureDetail
Product Type2-in-1 Lock Pick and Decoder
ModelsSS001 Pro, SS002 Pro, SS002R Pro
MaterialMetal
CompatibilitySpecific to SS001, SS002, or SS002R lock types
Package Dimensions (approx.)Length: 16 cm, Width: 14 cm, Height: 3 cm
Package Weight (approx.)0.08 kg
OriginMainland China

8. User Tips

  • Practice Makes Perfect: These tools require skill. Consistent practice on various locks will improve your proficiency.
  • Gentle Handling: As noted by some users, the tools can bend if excessive force is applied. Always use a light touch and rely on feel rather than strength.
  • Verify Compatibility: Double-check that the Lishi tool model (SS001, SS002, SS002R) precisely matches the lock type you are working on to avoid damage and ensure success.
  • Keep it Clean: A clean tool performs better. Regularly wipe down your Lishi pick to remove any grime.

9. Warranty and Support

For any issues, questions, or support regarding your Lishi 2-in-1 Pro tool, please contact the seller or manufacturer directly. Keep your purchase records for reference.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.