Introduction
The KCEVE 2X1 USB HDMI KVM Switch allows you to control two computers using a single monitor, keyboard, and mouse. This device combines the functionality of a USB switch and an HDMI switch, providing a streamlined solution for managing multiple systems. It supports high-resolution displays up to 8K@60Hz and offers ultra-fast data transfer with USB 3.0 ports. The KVM switch is compatible with various operating systems, including Windows, Linux, and Mac, and supports a range of input devices such as PCs, Laptops, and PS4.
Setup Instructions
Follow these steps to connect your KCEVE 2X1 USB HDMI KVM Switch:
- Power On/Off: Ensure the KVM switch is in the 'OFF' position using the toggle switch on the front panel before connecting any devices.
- Connect Monitor: Connect your monitor to the KVM switch's 'MONITOR OUTPUT' port using an HDMI cable.
- Connect USB Peripherals: Connect your keyboard, mouse, and other USB 3.0 peripherals (e.g., printer, U disk) to the 'USB 3.0 OUT' ports on the KVM switch.
- Connect PC 1 (HDMI): Connect PC 1's HDMI output to the KVM switch's 'INPUT 1' port.
- Connect PC 1 (USB): Connect PC 1's USB 3.0 port to the KVM switch's 'USB 3.0 IN 1' port using one of the provided USB 3.0 cables.
- Connect PC 2 (HDMI): Connect PC 2's HDMI output to the KVM switch's 'INPUT 2' port.
- Connect PC 2 (USB): Connect PC 2's USB 3.0 port to the KVM switch's 'USB 3.0 IN 2' port using the second provided USB 3.0 cable.
- Connect Power: Connect the provided DC/12V Power Adapter to the KVM switch's 'DC/12V' port and then to a power outlet.
- (Optional) Wired Remote: If desired, connect the wired remote control to the 'Wired Remote' port for convenient switching.
- Power On: Toggle the 'ON/OFF' switch on the KVM to the 'ON' position. The PC indicator lights will illuminate.

The KVM switch features Adaptive EDID for stable image transmission and is plug-and-play, requiring no additional drivers for most operating systems.
Operating Instructions
The KCEVE KVM Switch offers two convenient methods for switching between connected computers:
1. On-KVM Switch Button
Press the 'SELECT' button located on the front panel of the KVM switch to toggle between PC 1 and PC 2. The corresponding PC indicator light (PC 1 or PC 2) will illuminate to show which computer is currently active.
2. Wired Remote Control
If you have connected the wired remote control, simply press the button on the remote to switch between PC 1 and PC 2. This allows you to place the KVM switch in a less accessible location, keeping your desktop tidy while maintaining easy control.

Maintenance
To ensure the longevity and optimal performance of your KCEVE KVM Switch, please observe the following maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the exterior of the KVM switch. Avoid using liquid cleaners or aerosols, which may damage the device.
- Environment: Keep the KVM switch in a cool, dry place, away from direct sunlight, moisture, and extreme temperatures.
- Cable Management: Ensure all cables are neatly organized and not excessively bent or strained to prevent damage to the connectors and cables themselves.
- Power: Always use the provided DC/12V power adapter. Disconnect power during extended periods of non-use or during electrical storms.
Troubleshooting
If you encounter issues with your KCEVE KVM Switch, please refer to the following common problems and solutions:
- No Display on Monitor:
- Ensure the KVM switch is powered on and the correct PC is selected.
- Check all HDMI cables are securely connected between the computers, KVM switch, and monitor.
- Verify that the monitor is powered on and set to the correct input source.
- Try connecting the monitor directly to a computer to rule out monitor or cable issues.
- USB Devices (Keyboard/Mouse) Not Responding:
- Ensure all USB 3.0 IN cables are securely connected from both computers to the KVM switch.
- Check that your keyboard and mouse are connected to the 'USB 3.0 OUT' ports on the KVM switch.
- Try connecting the USB devices to different 'USB 3.0 OUT' ports.
- Restart the KVM switch and the connected computers.
- Flickering or Distorted Display:
- Ensure you are using high-quality HDMI cables, especially for 8K resolutions.
- Check the display settings on your computer to ensure the resolution and refresh rate are supported by your monitor and the KVM switch.
- Try a different HDMI cable.
- Switching Not Working:
- Verify that the KVM switch has power.
- Ensure the wired remote (if used) is properly connected.
- Try pressing the 'SELECT' button firmly on the KVM switch itself.
- Power cycle the KVM switch (turn off, unplug power, wait 10 seconds, plug back in, turn on).
Specifications
| Feature | Detail |
|---|---|
| Model Number | 9201 |
| Type | Cable Adapter / KVM Switch |
| Input Ports | 2 x HDMI, 2 x USB 3.0 (Type-B) |
| Output Ports | 1 x HDMI, 4 x USB 3.0 (Type-A), 2 x USB 2.0 (Type-A) |
| Video Resolution | Up to 8K@60Hz, 4K@144Hz, 8K@30Hz, 2K, 3D, 1080P |
| USB Data Transfer | Up to 5Gbps (USB 3.0) |
| HDCP Compliance | HDCP 2.2 |
| Switching Methods | Button Switch, Wired Remote Control |
| Operating Systems | Windows 11/10/8/Vista/XP, Linux, Mac OS, Chrome OS |
| Power Supply | DC/12V Power Adapter |
| Dimensions (L x W x H) | 21 cm x 16 cm x 6 cm |
| Weight | 0.7 kg |
| Package Contents | 1x KVM Switch, 1x DC12V Power Adapter, 2x USB 3.0 1.5M cables, User Manual |

User Tips
- For optimal video quality, especially at 8K@60Hz or 4K@144Hz, ensure you use high-quality HDMI 2.1 compatible cables.
- Always use the provided USB 3.0 cables for connecting your computers to the KVM switch to guarantee stable and high-speed data transfer for your peripherals.
- If you experience any display or USB issues, a simple power cycle of the KVM switch (unplugging and replugging the power adapter) can often resolve the problem.
Warranty and Support
For warranty information, technical support, or any product-related inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.