1. Introduction
This manual provides essential information for the installation, operation, and maintenance of your Gamnew Car Radio Canbus Decoder. This device is designed to facilitate data conversion between your Ford vehicle's CAN Bus system and an aftermarket Android head unit, ensuring proper functionality of various vehicle features.
2. Safety Information
- Operating Voltage: The decoder operates within a voltage range of +9V to +16V. Voltages outside this range (too low or too high) can cause permanent damage to the device.
- Wiring: This CAN Bus decoder is not equipped with pre-attached cables. When performing wiring, strictly follow the pin function description provided for your specific CAN Bus decoder model. Improper wiring can lead to damage to the decoder and potentially other vehicle electronics.
- Professional Installation Recommended: If you are unsure about the installation process or wiring, it is highly recommended to seek assistance from a qualified professional.
3. Product Overview & Compatibility
The Gamnew Car Radio Canbus Decoder series includes various models, each designed for specific Ford vehicles and years. Please identify your decoder model and verify its compatibility with your vehicle before installation.
Decoder Models and Compatible Vehicles:
Model: RZ-FD09 (Brand: Raise)
Compatible Ford Models:
- C-Max: 2010-2019
- Custom: 2012-2021
- EcoSport: 2013-2024
- Edge: 2015-2018
- Escape: 2012-2019
- Everest: 2015-2017
- Fiesta: 2008-2013
- Figo: 2015-2018
- Focus: 2011-2019
- Freestyle: 2015-2018
- Kuga: 2012-2019
- Mondeo: 2014-2019
- Ranger: 2015-2024
- Tourneo: 2012-2021
- Transit: 2012-2021
Model: RZ-FD11 (Brand: Raise)
Compatible Ford Models:
- Fiesta: 2009-2011
Model: RZ-FD10 (Brand: Raise)
Compatible Ford Models:
- C-Max: 2010-2019
- Custom: 2012-2021
- EcoSport: 2013-2024
- Edge: 2015-2018
- Escape: 2012-2019
- Everest: 2015-2017
- Fiesta: 2008-2013
- Figo: 2015-2018
- Focus: 2011-2019
- Freestyle: 2015-2018
- Kuga: 2012-2019
- Mondeo: 2014-2019
- Ranger: 2015-2024
- Tourneo: 2012-2021
- Transit: 2012-2021
Model: RP5-FD-002 (Brand: Simplesoft)
Compatible Models:
- Ford Edge: 2007-2010
- Ford Expedition: 2007-2014
- Ford Explorer: 2006-2010
- Ford F-150: 2007-2008
- Ford Mustang: 2005-2009
- Lincoln MKX: 2007-2015
- Lincoln Navigator: 2007-2014
Model: FD-SS-04A (Brand: Simplesoft)
Compatible Ford Models:
- F-150: 2009-2012
Model: Mustang (Brand: LZ)
Compatible Ford Models:
- Mustang: 2014-2021
4. Installation & Setup
- Pre-Installation Check: Before beginning installation, ensure your Android head unit is powered off and disconnected from the vehicle's power supply.
- Wiring: As the decoder does not come with pre-attached cables, you must perform wiring according to the pin function description specific to your decoder model. Refer to any diagrams or instructions provided with your purchase. Incorrect wiring can damage the decoder.
- Connection: Connect the wired CAN Bus decoder to your Android head unit and the vehicle's wiring harness as per the specific instructions for your head unit and vehicle model.
- Android Head Unit Settings: After physical installation, power on your Android head unit. Navigate to the CAN Bus settings screen within the Android radio's interface. Verify that your car's make and model can be displayed and selected. This step is crucial for the decoder to function correctly. Refer to the 'After receiving the goods, about canbus settings' instructions if available, or your Android head unit's manual for specific steps.
- Testing: Test all functions that rely on the CAN Bus, such as steering wheel controls, climate control display, and door status, to ensure proper communication.
If you are unsure about the fitting or wiring process, please contact the seller or a professional installer for support BEFORE attempting installation.
5. Operation
Once correctly installed and configured, the CAN Bus decoder operates automatically in the background, translating vehicle data for your Android head unit. This enables features such as:
- Steering wheel control integration
- Display of vehicle information (e.g., door open warnings, climate control status)
- Reverse gear detection for camera activation
- Illumination control synchronization
Specific functionalities may vary depending on your vehicle model, Android head unit, and the particular CAN Bus decoder model.
6. Troubleshooting
Common Issues and Solutions:
- No Functionality / Partial Functionality:
- Check Wiring: Ensure all connections are secure and correctly wired according to the pinout diagram. Improper wiring is a common cause of issues.
- Verify Android Head Unit Settings: Go to the CAN Bus settings on your Android head unit. Confirm that the correct car model and CAN Bus type are selected. Sometimes, a factory reset of the head unit's CAN Bus settings followed by re-selection can resolve issues.
- Power Supply: Confirm the decoder is receiving stable power within the +9V to +16V range.
- Decoder Overheating:
- Ensure adequate ventilation around the decoder.
- Verify operating voltage is within the specified range.
- Intermittent Functionality:
- Check for loose connections or damaged wires.
- Ensure the Android head unit's software is up to date.
If problems persist after following these steps, please contact customer support for further assistance.
7. Specifications
| Attribute | Specification |
|---|---|
| Product Type | Car Radio Canbus Decoder |
| Operating Voltage | +9V ~ +16V |
| Origin | Mainland China |
| High-concerned chemical | None |
| Compatibility | Specific Ford and Lincoln models (refer to Section 3) |
8. User Tips
- Verify Compatibility: Always double-check the compatibility list for your specific decoder model against your car's make, model, and year. For example, if you need a Canbus box for a 2011 Ford KA, ensure that model is explicitly listed or contact support for confirmation.
- Pinout Diagrams: For models like the Raise RZ-FD10, detailed pinout diagrams are essential for correct wiring. If a diagram is not included with your purchase, request it from the seller or manufacturer before attempting any connections.
- Android Head Unit Settings: Familiarize yourself with the CAN Bus settings menu on your Android head unit. Correct configuration here is often key to resolving functionality issues.
9. Warranty and Support
For any questions regarding product functionality, troubleshooting, or warranty claims, please contact the seller directly. Provide your order details and the specific model of your CAN Bus decoder for efficient support.
