1. Introduction
The KCEVE 10 Port KVM Switch is designed to allow up to ten computers to share a single monitor and four USB 3.0 peripheral devices. This device supports high-resolution video up to 4K@60Hz and features EDID simulation to maintain display settings during switching. With multiple switching modes including panel buttons, a wired remote, and RS232 commands, it offers flexible control for various environments such as home offices, server rooms, and educational settings.

Figure 1: KCEVE 10 Port KVM Switch Overview
2. Package Contents
Please check the package for the following items:
- 1 x KCEVE 10 Port KVM Switch
- 10 x USB 3.0 Cables (1.5m)
- 1 x Wired Remote Control (1.5m)
- 1 x 12V/2A Power Adapter
- 1 x User Manual

Figure 2: Product Dimensions and Package List
3. Specifications
| Feature | Description |
|---|---|
| Model Number | KVM2018-101A |
| Input Ports | 10 x HDMI, 10 x USB 3.0 (Type-B) |
| Output Ports | 1 x HDMI, 4 x USB 3.0 (1x USB-C, 3x USB-A), 1 x Audio |
| Video Resolution | Up to 4K@60Hz (backward compatible with 4K@30Hz, 2560*1440@120Hz) |
| USB Data Transfer | Up to 5Gbps (USB 3.0) |
| Switching Modes | Panel Buttons, Wired Remote Control, RS232 Commands |
| EDID Simulation | Supported |
| Power Supply | DC 12V/2A Power Adapter |
| Dimensions (L x W x H) | 24cm x 8cm x 3.2cm (approx. 9.45in x 3.15in x 1.26in) |
| Compatibility | Windows, Mac OS, Linux, Chrome OS, PS4/PS5, Raspberry Pi, Desktops, Laptops, STB |
| Certification | CE |

Figure 3: USB 3.0 Data Transfer Speeds

Figure 4: 4K@60Hz Visual Enjoyment
4. Setup Instructions
Follow these steps to connect your KVM switch:
- Power Off All Devices: Ensure all computers and the monitor are powered off before making any connections.
- Connect Monitor: Connect your monitor to the HDMI OUT port on the KVM switch using an HDMI cable.
- Connect USB Peripherals: Connect your keyboard, mouse, and other USB 3.0 peripheral devices (e.g., printer, U disk, headset) to the USB 3.0 ports (1x USB-C, 3x USB-A) on the front panel of the KVM switch. Connect your audio output device to the Audio port if desired.
- Connect Computers: For each computer (up to 10), connect one HDMI cable from the computer's video output to an HDMI IN port (PC1-PC10) on the KVM switch. Then, connect one USB 3.0 cable (Type-A to Type-B) from the computer's USB port to the corresponding USB 3.0 IN port (PC1-PC10) on the KVM switch.
- Note: Each PC requires both an HDMI and a USB 3.0 connection to the KVM switch. If your computer has a different video output (e.g., USB-C, DisplayPort, DVI, VGA), you will need an appropriate adapter or converter cable to HDMI.
- Connect Wired Remote (Optional): Plug the wired remote control into the dedicated 'Wired Remote' port on the KVM switch.
- Connect Power Adapter: Plug the 12V/2A power adapter into the DC12V port on the KVM switch, then plug the adapter into a power outlet.
- Power On: Turn on the KVM switch using the ON/OFF button. Then, power on your monitor and connected computers.

Figure 5: KVM Switch Connection Diagram

Figure 6: KVM Switch Port Layout
5. Operating Instructions
5.1 Switching Between Computers
The KVM switch offers three methods for switching between connected computers:
- Panel Buttons: Press the numbered buttons (1-10) on the front panel of the KVM switch to directly select the corresponding PC. The LED indicator above the button will light up to show the active computer.
- Wired Remote Control: Use the included wired remote control. Press the numbered buttons on the remote to switch to the desired PC. The remote features a digital screen display indicating the active PC.
- RS232 Commands: For advanced control, the KVM switch supports RS232 serial commands. Connect an RS232 cable to the KVM switch and use a serial terminal program with a baud rate of 115200.

Figure 7: Switching Methods (Button and Wired Remote)

Figure 8: RS232 Switching Interface
5.2 RS232 Switching Commands
The following commands can be used via RS232 for timed switching or integration with control systems:
| Command | Function |
|---|---|
| X1.1$ | Switch to PC 1 |
| X2.1$ | Switch to PC 2 |
| X3.1$ | Switch to PC 3 |
| X4.1$ | Switch to PC 4 |
| X5.1$ | Switch to PC 5 |
| X6.1$ | Switch to PC 6 |
| X7.1$ | Switch to PC 7 |
| X8.1$ | Switch to PC 8 |
| X9.1$ | Switch to PC 9 |
| XA.1$ | Switch to PC 10 |
Figure 9: RS232 Switching Command Table
5.3 EDID Simulation
The KVM switch features EDID simulation to prevent window rearrangement when switching between computers. This ensures that your display settings and window positions remain consistent.
- Enable/Disable EDID Simulation: Press and hold the switch button "1" on the KVM front panel for 3 seconds to toggle the EDID emulation function on or off as required.

Figure 10: EDID Simulation Functionality
6. Compatibility
The KCEVE 10 Port KVM Switch offers broad compatibility, supporting various host devices, systems, and USB peripherals. It is plug-and-play, requiring no drivers for most operating systems.
6.1 Host Compatibility
- Laptops
- Desktops
- Gaming Consoles (PS4, PS5)
- Single-board Computers (Raspberry Pi)
- Set-Top Boxes (STB)
6.2 System Compatibility
- Windows (including Vista)
- Mac OS
- Linux
- Chrome OS
6.3 USB Device Compatibility
- Keyboards
- Mice
- U Disks (USB drives)
- Printers
- Card Readers
- Headphones
- Hard Disks
- Webcams

Figure 11: Broad Compatibility Overview
7. Troubleshooting
If you encounter issues with your KVM switch, please refer to the following common problems and solutions:
- No Display on Monitor:
- Ensure all HDMI cables are securely connected between the computers, KVM, and monitor.
- Verify the KVM switch is powered on and the correct input (PC) is selected.
- Check if the monitor is powered on and set to the correct input source.
- Try a different HDMI cable or monitor to rule out cable/monitor issues.
- Ensure your computer's display resolution and refresh rate are supported by the KVM and monitor (up to 4K@60Hz).
- USB Devices Not Responding:
- Confirm that the USB 3.0 cables are properly connected from each computer to the KVM switch.
- Ensure the 12V/2A power adapter is connected and providing sufficient power, especially for high-power USB devices.
- Try connecting the USB device directly to the computer to verify its functionality.
- Test with different USB ports on the KVM switch.
- Switching Issues:
- Make sure the wired remote control is securely plugged into the KVM switch.
- If using panel buttons, ensure you are pressing the correct button for the desired PC.
- For RS232 control, verify the baud rate is set to 115200 and commands are correctly formatted.
- Window Rearrangement After Switching:
- This can be resolved by enabling the EDID simulation function. Press and hold button "1" on the KVM front panel for 3 seconds to activate EDID emulation.
- Audio Not Working:
- Check the audio cable connection from your speaker/headset to the KVM's audio output.
- Ensure the audio output is correctly configured on the active computer.
8. User Tips
- Optimal Performance: For best video and USB performance, use high-quality HDMI and USB 3.0 cables.
- EDID Simulation: If you frequently switch between computers and notice your windows rearranging, enable the EDID simulation feature to maintain your desktop layout.
- Power Stability: Always use the provided 12V/2A power adapter to ensure stable operation, especially when connecting multiple USB devices or high-power peripherals.
- Space Saving: This KVM switch is an excellent solution for decluttering your workspace by allowing multiple computers to share a single set of peripherals and a monitor.

Figure 12: KVM Switch for Space Optimization
9. Warranty and Support
For any questions, technical support, or warranty claims, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific warranty terms and contact information.