1. Introduction
Thank you for choosing the WMARK NG-1207 Rechargeable Hair Trimmer. This professional-grade detail trimmer is designed for precision grooming, offering both wet and dry cutting capabilities. Featuring a durable 440C stainless steel and ceramic blade, a powerful motor, and a long-lasting lithium battery, the NG-1207 provides a reliable and efficient trimming experience. Please read this manual carefully before use to ensure proper operation and maintenance.
Figure 1: WMARK NG-1207 Hair Trimmer and Included Accessories
2. Package Contents
Please check the package for the following items:
- WMARK NG-1207 Rechargeable Hair Trimmer
- 3 Guide Combs (1mm, 2mm, 3mm)
- Cleaning Brush
- USB Type-C Charging Cable
- User Manual (this document)
Note: Due to air freight restrictions, lubricating oil is not included in the package.
Figure 2: Detailed View of Accessories
3. Product Overview
The WMARK NG-1207 features a sleek design and robust construction for optimal performance.
Key Components:
- Blade Assembly: Detachable cutting head with 440C stainless steel fixed blade and ceramic moving blade.
- Power Button: Located on the side for easy on/off operation.
- LED Indicator: Displays charging status and battery level.
- Charging Port: USB Type-C port at the bottom for convenient charging.
- ABS Housing: Durable and ergonomic body for comfortable grip.
Figure 3: Trimmer Blade and Body Detail
4. Setup
4.1 Charging the Trimmer
- Ensure the trimmer is turned off.
- Connect the USB Type-C charging cable to the charging port at the bottom of the trimmer.
- Plug the other end of the USB cable into a compatible USB power adapter (not included) or a computer USB port.
- The LED indicator will illuminate to show that the trimmer is charging.
- A full charge takes approximately 2.5 hours and provides up to 210 minutes of cordless use.
- Once fully charged, the LED indicator may change color or turn off, depending on the model. Disconnect the charger.
4.2 Attaching/Detaching Guide Combs
- Select the desired guide comb (1mm, 2mm, or 3mm) for your preferred hair length.
- Align the guide comb with the trimmer blade and push it firmly until it clicks into place.
- To remove a guide comb, gently pull it upwards from the blade assembly.
5. Operating Instructions
5.1 Basic Operation
- Before use, ensure the trimmer is fully charged.
- Press the power button to turn the trimmer on.
- Hold the trimmer with the blade flat against the skin or at the desired angle, moving against the direction of hair growth.
- Use smooth, even strokes for best results.
- Press the power button again to turn the trimmer off after use.
5.2 Trimming Techniques
- For Head Hair: Use guide combs for even length. Start with a longer comb if unsure, then switch to shorter lengths as needed.
- For Beard and Mustache: Use guide combs to maintain desired length. For detailing, remove the comb and use the bare blade carefully.
- For Body Hair: Attach a guide comb and trim against the direction of hair growth.
- For Nose and Ears: Use the bare blade with extreme caution. Do not insert the blade deeply into nasal passages or ear canals.
- Wet/Dry Haircut: The trimmer is suitable for both wet and dry use. For wet use, ensure the trimmer is not submerged in water.
6. Maintenance
6.1 Cleaning the Blades
- Turn off the trimmer and disconnect it from the power source.
- Detach the cutting head by gently pushing it off the trimmer body.
- Use the provided cleaning brush to remove any loose hair from the blades and the trimmer body.
- The blades can be washed under running water. Ensure the trimmer body is not exposed to excessive water if not explicitly designed for full submersion.
- Allow the blades to air dry completely before reattaching them to the trimmer.
6.2 Lubrication
Regular lubrication helps maintain blade performance and longevity. Apply a small drop of clipper oil (not included) to the blades after every few uses, especially after washing. Turn the trimmer on for a few seconds to distribute the oil evenly.
6.3 Storage
Store the trimmer in a cool, dry place, away from direct sunlight and moisture. Ensure the trimmer is clean and dry before storing. Keep out of reach of children.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Trimmer does not turn on. | Low battery or no charge. | Charge the trimmer for 2.5 hours. |
| Poor cutting performance. | Blades are dirty, dull, or not lubricated. | Clean the blades thoroughly and apply clipper oil. If blades are dull, consider replacement. |
| Trimmer pulls hair. | Blades are dirty, dull, or moving too slowly. | Clean and lubricate blades. Ensure trimmer is fully charged for optimal speed. |
| Trimmer gets hot. | Extended use or dirty/unlubricated blades. | Allow the trimmer to cool down. Clean and lubricate blades. |
8. Specifications
| Feature | Specification |
|---|---|
| Model | NG-1207 |
| Blade Material | 440C Stainless Steel Fixed Blade + Ceramic Moving Blade |
| Housing Material | ABS |
| Motor Speed | 7500 RPM |
| Battery Type | Lithium Battery |
| Battery Capacity | 1600mAh |
| Charging Time | Approx. 2.5 hours |
| Operating Time | Approx. 210 minutes (over 90 minutes) |
| Voltage | <20V |
| Charging Interface | USB Type-C |
| Functions | Wet/Dry Haircut, Washing Blades Under Water, Fast Charging, Charging Indication |
| Certification | CE |
Figure 4: Product Packaging with Specifications
9. User Tips
- Pre-trim Preparation: For best results, ensure hair is clean and detangled before trimming.
- Start Long: When using guide combs, always start with a longer comb length than you think you need, and gradually reduce it until you achieve the desired length.
- Consistent Strokes: Use consistent, overlapping strokes to ensure an even cut.
- Listen to the Trimmer: If the trimmer sounds strained or pulls hair, it may need cleaning, lubrication, or recharging.
- Regular Cleaning: Clean the blades after each use to prevent hair buildup and maintain hygiene.
10. Warranty and Support
For any questions, concerns, or technical support regarding your WMARK NG-1207 Hair Trimmer, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.