1. Introduction
The Irado UV-98 PLUS is a versatile multi-band walkie-talkie designed for a wide range of communication needs. Featuring a large 2.4-inch TFT HD color screen, it offers advanced functionalities such as cross-band repeating, one-click frequency measurement, FM radio, and customizable key shortcuts. This manual provides essential information for setting up, operating, and maintaining your device to ensure optimal performance.
2. Package Contents
Please check the box for the following items:
- Iradio UV-98 PLUS Radio
- Battery (Li-ion, 2400mAh)
- Antenna
- Base Charger
- Charger (Power Adapter)
- Type-C USB Charging Cable
- Belt Clip
- Lanyard
- User Manual (physical copy)

Video: Unboxing and Overview
3. Product Overview
The Irado UV-98 PLUS features a robust design with a clear 2.4-inch TFT HD large color screen for easy navigation and information display. Key controls and features are highlighted below:



Controls and Ports:
- ON/OFF/Volume Knob: Located at the top, used for powering the device on/off and adjusting audio volume.
- Alarm Button: For emergency alerts.
- Launch Key (PTT): Push-to-Talk button for transmitting.
- Side Key 1 & 2: Customizable shortcut keys.
- Menu Function Area: Navigation buttons for menu access.
- Keypad: For frequency input, channel selection, and menu navigation.
- Type-C Charger Port: For direct charging via USB-C cable.
- Earphone Terminal: For connecting an external earphone.
- Indicator: Status light.
- Antenna Connector: For attaching the antenna.
4. Initial Setup
4.1. Battery Installation
- Align the Li-ion battery pack with the battery compartment on the back of the radio.
- Gently push the battery until it clicks securely into place.
4.2. Antenna Attachment
- Carefully screw the provided antenna onto the antenna connector at the top of the radio.
- Ensure the antenna is firmly attached but do not overtighten.
- Important: The radio supports multiple frequency ranges (18-64MHz, 64-620MHz, 840-1000MHz). For optimal performance and to avoid damage, always use an antenna compatible with the selected frequency range. For example, a 27MHz CB antenna is required for 27MHz operation.



4.3. Charging the Battery
The Irado UV-98 PLUS offers two charging methods:
- Using the Base Charger:
- Connect the power adapter to the base charger and plug it into a power outlet.
- Place the radio (with battery installed) into the base charger.
- The indicator light on the charger will typically show red during charging and turn green when fully charged.
- Using the Type-C USB Charging Cable:
- Connect one end of the Type-C USB charging cable to the radio's Type-C port.
- Connect the other end to a compatible USB power source (e.g., wall adapter, power bank, computer USB port, car charger).

5. Basic Operation
5.1. Power On/Off and Volume
- To power on, rotate the ON/OFF/Volume knob clockwise.
- To power off, rotate the ON/OFF/Volume knob counter-clockwise until it clicks.
- Adjust the volume by rotating the same knob.
5.2. Frequency and Channel Selection
Use the keypad to directly input frequencies or navigate through channels. The 2.4-inch display will show the active frequency, VFO mode, and other relevant information.
5.3. Triple Frequency Standby
The radio supports monitoring up to three frequencies simultaneously. This feature ensures you don't miss important communications across different bands.
5.4. PTT Transmission
Press and hold the Push-to-Talk (PTT) button on the side of the radio to transmit. Release the button to receive. The radio supports Triple PTT transmission for enhanced flexibility.
6. Advanced Features
6.1. Customizable Keys Shortcuts
You can personalize the functions of the side keys and keyboard for quick access to frequently used features.
- Press the Menu button.
- Navigate to "Basic Settings" and select "Key Define".
- Customize the desired functions for each side key and keyboard shortcut.
Video: Customizing Key Shortcuts

6.2. One-Click Frequency Measurement
This feature allows for fast frequency matching.
- Access the Menu and navigate to "Analog Settings".
- Select "Detect Range" to choose the desired frequency band for measurement (e.g., 400-480 MHz, 18-64 MHz).
- Press the shortcut button (previously set as the frequency matching function) to initiate one-click frequency matching.
Video: One-Click Frequency Measurement

6.3. FM Radio
The radio includes an FM radio function with storage capabilities.
- Enter the Menu and find "FM Radio".
- You can save the current FM frequency and edit its name. The radio can store up to 128 FM channels.
- In FM radio mode, long press the "#" button to switch between Short Wave (SW), Medium Wave (MW), and Long Wave (LW) bands.
- Short press the "*" button to move the cursor and change frequency and other settings as needed.
Video: FM Radio Operation
6.4. Cross-Band Repeater
The cross-band repeater function extends your communication range by relaying signals between different frequency bands (UHF/VHF) or within the same band.
- Enter the Menu and navigate to "Basic Settings".
- Enable "Multi Standby" and "UV Repeater".
- Set a frequency point for each of the A and B frequencies in the UHF/VHF band.
- Customize a button for "Cross Band Repeater Switch" in the "Key Define" settings for quick activation.


Video: Cross-Band Repeater Setup
6.5. Other Features
- VOX (Voice Activated Transmit): Enables hands-free communication.
- Scanning Functions: Includes frequency scan, channel scan, and spectrum scanning for finding active transmissions.
- DTMF Functions: Supports DTMF encoding transmission, remote dizziness, and remote death wake-up.
- NOAA Weather Channels: Access 11 NOAA weather forecast channels (available only in the United States).
- Aviation AM Signals: Receives aviation AM signals in the 108-136MHz frequency range.
- Power-Saving Mode: Optimizes battery life.
- Emergency Alarm Function: For critical situations.
- Editable Device/Channel Names: Customize names for easier identification.
- Custom Startup Logo/Prompt: Personalize your radio's startup experience.
7. Specifications
| Attribute | Value |
|---|---|
| Model Number | UV-98 PLUS |
| Brand Name | Iradio |
| Walkie Talkie Type | Portable |
| Output Power (W) | 5w-10w |
| Maximum Range | 5km-10km |
| Frequency Range | Multi Band (CB:27Mhz RX/TX, FM:64-108MHZ RX, AM/USB/LSB/CW reception, SW:2.3-30MHz RX, MW:520-1710KHz RX, LW:153-279KHz RX, 18-64MHz TX/RX, 136-520MHZ TX/RX, RX:18-620MHz, 840-999MHz) |
| Storage Channel | 1024 + 3 VFO channels |
| Channel Spacing | 25KHz/12.5KHz |
| Operating Voltage | 7.4V DC |
| Battery Capacity | 2400mAh |
| Charging Method | Type-C/Dock Charging |
| Dimension (without antenna) | 149 x 64 x 37mm |
| Weight | 307g |
| Frequency Stability | ±2.5ppm |
| Working Temperature | 20°C - 60°C |
| Material | Plastic |
| Is_Display | Yes |
| Waterproof / Water-Resistant | No |
| Battery Included | Yes |



8. Maintenance
8.1. Cleaning
- Use a soft, damp cloth to clean the exterior of the radio.
- Do not use harsh chemicals, solvents, or abrasive cleaners, as these can damage the device.
8.2. Battery Care
- Charge the battery fully before its first use.
- Avoid completely draining the battery or leaving it uncharged for extended periods to prolong its lifespan.
- Store the battery in a cool, dry place when not in use.
8.3. Antenna Care
- Ensure the antenna is securely attached before operation.
- Avoid bending or stressing the antenna excessively.
- Replace damaged antennas with compatible ones to maintain signal quality.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Radio does not power on | Battery is low or not installed correctly. | Charge the battery or ensure it is properly seated in the compartment. |
| Cannot transmit or receive | Incorrect frequency/channel settings, antenna not connected, out of range. | Verify frequency/channel, check antenna connection, move closer to other radios or repeater. |
| Poor audio quality | Low volume, weak signal, antenna issue. | Adjust volume, check antenna, ensure clear line of sight, or try a different frequency. |
| Frequency measurement not working | Incorrect frequency band selected in settings. | Ensure the correct frequency band is selected in the "Detect Range" settings. |
| Unable to program channels via computer | Using a non-dedicated programming cable or incorrect software. | Use the dedicated Type-C interface Programming Cable and UV-98 PLUS frequency writing software provided by the manufacturer. Contact customer support if you need the software. |
10. User Tips
- Frequency Range Switching: You can switch the frequency range (18-64MHz, 64-620MHz, 840-1000MHz) according to your usage needs. These ranges cannot work simultaneously. Always replace the antenna with one compatible with the selected frequency range. For example, a CB antenna (27MHz antenna) is required for 27MHz operation.
- Programming Cable: This walkie-talkie requires a dedicated Type-C interface Programming Cable provided by the manufacturer to be connected to a computer for channel programming. A regular mobile phone data cable or generic write frequency cable cannot establish a communication connection. If you cannot find the frequency writing software, please contact us.
- CB Band Performance: For optimal performance on the CB band, ensure you are using the correct 27MHz antenna.
Video: How to Switch Frequency Range
11. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the manufacturer's official website or contact their customer support directly. Keep your purchase receipt as proof of purchase for any warranty claims.