E99 Pro Drone User Manual

1. Important Safety Information and Disclaimer

Please read this manual carefully before operating the E99 Pro Drone. Improper operation can lead to injury or damage. This product is not suitable for children under 36 months due to small parts and potential hazards.

Battery Safety:

• Do not overcharge or overdischarge the battery.
• Do not place the battery under high temperature conditions.
• Do not throw the battery into fire.
• Do not throw the battery into water.

For beginners, it is highly recommended that an experienced adult assists with operation.

2. Product Overview

The E99 Pro Drone is a versatile quadcopter designed for aerial photography and recreational flight. It features an 8K HD camera, dual cameras, optical flow positioning, and a screen remote control for real-time viewing.

3. Package Contents

The E99 Pro Drone package includes the following items:

• Aircraft (Drone) x 1
• Remote Control x 1
• Memory Card + Card Reader x 1
• Body Battery x 1
• Spare Air Blades x 4
• Protective Rack x 4
• USB Charging Cable x 2
• Instruction Manual x 1
• Screwdriver x 1

4. Setup Guide

4.1 Battery Installation and Charging

1. Drone Battery: Insert the 3.7V 1800mAH modular battery into the drone's battery compartment. Ensure it clicks securely into place.
2. Remote Control Battery: Open the battery compartment on the back of the remote control and insert 3 AAA batteries (not included). Close the compartment.
3. Charging: Connect the drone's battery to a universal USB interface using the provided USB charging cable. The charging time is approximately 60 minutes.

4.2 Propeller and Protective Rack Installation

1. Attach the protective racks to each motor arm of the drone.
2. Ensure propellers are securely fastened. If replacing, match the propellers to the correct motor (usually indicated by markings).

4.3 Initial Calibration

Before flight, place the drone on a level surface. This is crucial for engine balance and proper propeller rotation. Do not attempt to operate the drone by hand during calibration or initial takeoff, as this can cause imbalance and danger.

5. Operating Instructions

5.1 Remote Control Overview

The remote control features a built-in screen for real-time viewing of aerial footage. It also supports mobile phone image transmission, allowing for dual-screen functionality.

5.2 Takeoff and Landing

1. Unlocking Standby: After initial calibration, gently push up the left lever. The drone's propellers will rotate slowly, indicating it's in standby mode.
2. One-Click Takeoff: Press the "One click takeoff" button on the remote control to initiate automatic takeoff.
3. One-Click Landing: Press the "One click landing" button on the remote control to initiate automatic landing.

5.3 Flight Controls and Features

• Speed Adjustment: Use the speed adjustment button on the remote control to switch between slow, medium, and fast flight speeds.
• 360° Rolling: During flight, click the "roll" button on the remote control to perform a 360° aerial stunt.



• Headless Mode: Activate headless mode for easier control, eliminating the need to identify the drone's front direction.
• Optical Flow Positioning: The drone is equipped with optical flow positioning for stable indoor and outdoor auxiliary hovering.



• Trajectory Flight: Use the mobile app to draw a path on the screen, and the drone will fly along the designated trajectory.

5.4 Camera Operation

• Video Capture Resolution: The drone supports 8K UHD and 6K UHD video recording with its dual cameras.
• Gesture Photography: During flight, aim at the camera and make corresponding gestures to take photos or videos.



• Camera Adjustment: The camera's orientation can be adjusted remotely by 90 degrees. It features a 110-degree wide-angle lens.



• Real-time Viewing: View aerial footage in real-time via the remote control screen or a connected mobile phone.
• 50X Zoom: The mobile app allows for 0-50x free zoom of the image, enabling clear distant views.



• Beauty Filter Shooting/Post Production: Take beautiful photos with one click, with options to enable filters and beauty photography.



• Image Transmission Signal: The drone uses a 2.4G signal for image transmission.

5.5 Video Demonstration

6. Maintenance

• Cleaning: Regularly clean the drone body, propellers, and camera lens with a soft, dry cloth. Avoid using harsh chemicals.
• Propeller Inspection: Check propellers for any damage or cracks before each flight. Replace damaged propellers with spare ones provided.
• Battery Storage: When not in use for extended periods, store the battery in a cool, dry place at approximately 50% charge.
• Software Updates: Check the official app for any available firmware updates for the drone and remote control to ensure optimal performance.

7. Troubleshooting

7.1 Fan Blade Not Rotating or Rotating Slowly

If a fan blade does not rotate or rotates too slowly, consider the following:

1. Level Surface: Ensure the drone is placed on a perfectly level surface before attempting to fly. If not, the engine may lose balance, preventing proper propeller rotation.
2. Manual Operation: Avoid holding the drone by hand during startup or flight. This can interfere with engine balance and is a safety risk.
3. Standby State: After initial calibration, gently push up the left lever on the remote control. The propellers should rotate slowly, indicating the standby state is unlocked. If they don't rotate or rotate very slowly, this is normal. Push the left joystick up again to initiate normal flight.

7.2 Other Issues

• Loss of Control: Ensure the remote control batteries are fully charged and within the effective remote control distance (approx. 1000 meters).
• Unstable Flight: Re-calibrate the drone on a level surface. Check for any physical damage to propellers or motors.
• Poor Image Quality: Ensure the camera lens is clean. Check the image transmission signal strength (2.4G).

8. Specifications

9. Warranty and Support

For any issues or questions regarding your E99 Pro Drone, please refer to the troubleshooting section of this manual. If problems persist, contact the seller or manufacturer for further assistance.

Please retain your proof of purchase for warranty claims. Specific warranty terms may vary by region and seller.