1. Setup and Installation
This section provides instructions for the proper installation of your Midea wired controller. Professional installation is recommended.
1.1 Package Contents
- Midea KJRH-120F/BMK0-E Wired Controller
- Mounting Screws (if included)
- Installation Guide (this document)
1.2 Mounting the Controller
The controller is designed for wall mounting. Ensure the chosen location is easily accessible and away from direct sunlight, heat sources, or areas with high humidity.
- Carefully remove the back cover of the controller.
- Position the back cover on the wall at the desired height.
- Mark the drilling points for the mounting screws.
- Drill holes at the marked points and insert wall anchors if necessary.
- Secure the back cover to the wall using the provided screws.
1.3 Wiring Connections
Important: Ensure the main power supply to the air conditioning unit is disconnected before performing any wiring.
The controller requires a power supply of 13.5V~30V. Connect the communication wires from the indoor air conditioning unit to the corresponding terminals on the back of the wired controller. Refer to the wiring diagram provided with your air conditioning indoor unit for specific terminal designations.

- Once wiring is complete, carefully attach the front panel of the controller to the secured back cover.
- Restore power to the air conditioning unit.
2. Operating Instructions
This section details the functions of the Midea wired controller and how to use its various features.

2.1 Controller Layout
The controller features a clear LCD display and several buttons for operation:
- Display: Shows current temperature, operating mode, fan speed, time, and other status indicators.
- Power Button (⏻): Turns the air conditioning unit On or Off.
- Menu Button (☰): Accesses advanced settings and functions.
- Up/Down Arrows (▲ / ▼): Adjusts temperature, navigates menu options, or changes settings.
- Left/Right Arrows (◄ / ►): Navigates menu options or adjusts specific parameters.
- Enter Button (⏎): Confirms selections or enters a menu.
- Return Button (↵): Goes back to the previous screen or exits a menu.
- Fan Button (☯): Adjusts fan speed or selects fan mode.
- Lock Button (🔒): Locks or unlocks the controller buttons to prevent accidental changes.
2.2 Basic Operation
- Power On/Off: Press the Power Button (⏻) to turn the unit on or off.
- Adjusting Temperature: When the unit is on, use the Up (▲) or Down (▼) arrow buttons to set the desired room temperature.
- Selecting Operating Mode: Press the Menu Button (☰) to cycle through available modes (e.g., Heat, Cool, Auto, Fan, Dry). Press Enter (⏎) to confirm.
- Adjusting Fan Speed: Press the Fan Button (☯) to cycle through fan speed options (e.g., Low, Medium, High, Auto).
- Key Lock Function: Press the Lock Button (🔒) to lock the keypad. Press it again to unlock. A lock icon will typically appear on the display when activated.
2.3 Advanced Settings
Access advanced settings by pressing the Menu Button (☰) and navigating through the options using the arrow keys. These settings may include:
- Timer settings (On/Off timer)
- Sleep mode
- Display brightness
- Clock adjustment
- Error code display
Refer to the on-screen prompts and your air conditioning unit's specific manual for detailed instructions on advanced functions.
3. Maintenance
Regular maintenance ensures optimal performance and longevity of your wired controller.
3.1 Cleaning the Controller
To clean the surface of the controller:
- Turn off the air conditioning unit and disconnect power if possible.
- Wipe the display and buttons with a soft, dry cloth.
- For stubborn dirt, slightly dampen the cloth with water. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the plastic and electronic components.
- Ensure no liquid enters the controller casing.
3.2 Inspection
Periodically check the controller for any visible damage, loose connections, or unusual behavior. If any issues are observed, refer to the Troubleshooting section or contact a qualified technician.
4. Troubleshooting
This section addresses common issues you might encounter with your wired controller.
| Problem | Possible Cause | Solution |
|---|---|---|
| Controller display is blank. | No power to the controller or air conditioning unit. Loose wiring connection. | Check power supply to the AC unit. Verify wiring connections at the back of the controller and the indoor unit. |
| Buttons are unresponsive. | Key lock function is active. Controller malfunction. | Press the Lock Button (🔒) to unlock the keypad. If still unresponsive, try cycling power to the AC unit. |
| Incorrect temperature reading. | Sensor issue or controller placed in an unsuitable location. | Ensure the controller is not exposed to direct sunlight or drafts. If the problem persists, contact service. |
| Air conditioner not responding to commands. | Communication error between controller and AC unit. AC unit malfunction. | Check wiring connections. Power cycle the AC unit. If the issue continues, consult a technician. |
5. Specifications
| Feature | Detail |
|---|---|
| Model Number | KJRH-120F/BMK0-E (17117100000510) |
| Type | Air Conditioning Fitting, Air Conditioner Parts |
| Application | Commercial |
| Power Supply | 13.5V~30V |
| Operating Temperature | -10°C to +40°C |
| Certification | CE |
| Origin | Mainland China |
| Approximate Dimensions (L x W x H) | 15 cm x 13 cm x 13 cm |
| Approximate Weight | 0.5 kg |
6. User Tips
- Connectivity: This is a wired controller designed for direct communication with compatible Midea air conditioning cassette units. It does not feature Wi-Fi connectivity for remote control via smart devices.
- Placement: For accurate temperature readings, avoid installing the controller in areas with direct drafts, direct sunlight, or near heat-emitting appliances.
- Key Lock: Utilize the key lock function (🔒) to prevent unauthorized or accidental changes to settings, especially in commercial environments.
7. Warranty and Support
For warranty information, please refer to the terms and conditions provided by your original seller or contact Midea customer support directly. Keep your proof of purchase for any warranty claims.
If you encounter issues that cannot be resolved using the troubleshooting guide, please contact a qualified HVAC technician or the product's seller for assistance.